Recommended
- Swimming Pools
- Compression Joints
- Tile to Tile joints
- Chlorine Resistant
- Long Term Water Immersion Joints
- Shower Rooms
Total: £0
(Price shown excludes VAT)Total: £0
(Price shown excludes VAT) (Price shown excludes VAT) (Price shown excludes VAT)
Arbo
ARBO Arbosil HM 310ml
£2.45Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity.
MAIN APPLICATIONS
This product is recommended for the sealing around all types of sanitary fittings, including baths, showers, urinals, sinks, and washbasins in domestic and commercial locations. It is suitable for use in areas of high humidity. It can be used to seal around laminates and worktops. Suitable for both interior and exterior use. Use for sealing of aluminium sheets and components. Use as an adhesive to bond PVC trims.
NB: It is not recommended for overpainting or use against most metal surfaces, particularly soft metals like brass or lead, and is not for use against natural stone. (Contact Adshead Ratcliffe Technical Services for advice on which product to use against these substrates).
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination and any loose materials. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth.
Application
Arbosil HM is supplied in cartridges and can be applied into the joint using an Arbo Caulking Gun. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm Maximum 25mm (single application);
35mm (multiple applications)
Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
Arbo ARBOKOL 1025 SP
£60.00Arbokol 1025 SP is a unique two-part Epoxy sealant which cures to form a hard-wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression.
For use in a variety of internal stress relief joint systems where continual water resistance and a high degree of chemical resistance (especially to common cleaning substances) are required.
Not recommended
- Structural Joints
Colours
- Off White
- Grey
ARBO Arbothane 1245 600ml – Box of 20
£110.00Arbothane 1245 is a one-part Polyurethane Sealant that cures on exposure to moisture vapour to form a tough but flexible rubber. Arbothane 1245 has good adhesion to concrete, brickwork, metals and many other common construction substrates.
MAIN APPLICATIONS
Recommended for use in floor joints, expansion joints and structural cladding applications.
NB: Not recommended for use against natural stone.
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth.
Application
All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants. Arbothane 1245 is supplied in 600ml foil packs and can be applied into the joint using an Arbo Foil Pack Gun.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm Maximum 25mm (single application); for advice on multiple applications, please contact Adshead Ratcliffe Technical Services Department.
Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 20mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbosil LM 380ml
£3.10Arbosil LM is a one-part Neutral Cure Silicone Sealant that cures on exposure to moisture vapour to form an elastic silicone rubber.
MAIN APPLICATIONS
Recommended for perimeter sealing of PVCu frames and sealing joints in brickwork, the MVP and Heel Bead methods of glazing insulating glass units, remedial glazing, and sealing joints in translucent roofing sheets. NB: It is not recommended for overpainting, glass wall assemblies and uses against natural stone.
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil LM is supplied in polyethylene 310 and 380ml cartridges and can be applied into the joint using an Arbo Caulking Gun
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm Maximum 25mm (single application);
50mm (multiple applications)
Joint Depth Minimum
10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbosil 1096 380ml – Box of 25
£136.15Arbosil 1096 is a one-part Low Modulus Neutral Cure Silicone Sealant that cures on exposure to moisture vapour to form an elastic silicone rubber.
MAIN APPLICATIONS
Recommended for use in many forms of construction including glass to glass joints, curtain wall assemblies, perimeter seals on curtain walling, perimeter sealing of polyester powder coated and PVCu frames and glazing of windows in swimming pool buildings. Approved by Pilkingtons and other major glass manufacturers for use with laminated glass. Suitable for use as a weather seal with structural glazed assemblies.
NB: It is not recommended for overpainting, and use against natural stone.
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil 1096 is supplied in polyethylene 380ml cartridges and can be applied into the joint using an Arbo Caulking Gun
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm
Maximum 25mm (single application);
50mm (multiple applications)
Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbosil 1081 310ml – Box of 25
£99.25Arbosil 1081 is a one-part Acetoxy Cure Silicone Sealant that cures on exposure to moisture vapour to form an elastic silicone rubber. Arbosil 1081 White and Black contain a fungicide to help reduce the incidence of mould growth when used in kitchens, bathrooms and other sanitary applications. Arbosil 1081 Translucent does not contain a fungicide and is recommended for use in the production of fish tanks and aquariums.
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
Application
Arbosil 1081 is supplied in polyethylene 310ml cartridges and can be applied into the joint using an Arbo Caulking Gun.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm
Maximum 25mm
Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 15mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints
PLEASE NOTE THIS IS A NON STOCK ITEM & EXTENDED LEAD TIMES ARE ADVISED OF ANYTHING UP TO 3 WEEKS
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbokol AG2 2.5 Litre
£30.00Arbokol AG2 is a two part Polysulphide Sealant which cures once the two components are mixed together to give a flexible rubber seal. It has good adhesion to concrete, stone, metals and many
other common building substrates.MAIN APPLICATIONS
Recommended for sealing structural floor joints, parapet wall joints, concrete roadways and pavements, hard standing floor pads, joints in metal and concrete sea walls and joints in water retaining (non-drinking water) structures.
For very heavily trafficked floor joints, it is recommended that the level of Arbokol AG2 is recessed. Please contact Adshead Ratcliffe Technical Services Department for further information.
Not recommended for use with potable water.
Caution: For joints in sports stadiums, please contact Adshead Ratcliffe Technical Services Department for further information.
APPLICATION INSTRUCTIONS
Joint preparation The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes. Mixing The base and curing agent ratio controls the adhesion, strength and durability of Arbokol AG2. The components must therefore be thoroughly mixed.
APPLICATION
The normal method of application is to fill the mixed sealant into Arbo Barrel Guns using a heavy-duty follower plate. The sealant should be extruded firmly into the joint by maintaining an even pressure on the gun’s trigger. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For primers and cleaners, please click here.
ARBO Arbosil 1071 White 380ml – Box of 25
£154.00Intumescent & Fire Resistant Products
Arbosil 1071 is a one part Low Modulus Fire Resisting and Acoustic Silicone Sealant which cures on exposure to moisture vapour to form a very elastic silicone rubber.
Arbosil 1071 has good adhesion to concrete, brickwork, metals and many other common construction substrates.
Arbosil 1071
- One Part Fire Resistant Silicone Sealant
Recommended
- Perimeter Sealing of Fire Doors & Screens
- High Movement Fire Resistant Joints
- Acoustic Joints
Not recommended
- Overpainting
- Natural Stone
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Arbosil 1090 380ml – Box of 25
£144.55Arbosil 1090 is a one part Low Modulus Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form a very elastic silicone rubber. Arbosil 1090 has good adhesion to concrete, brickwork, metals and many other common construction substrates.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
ARBO Primer 2650 – 500ml
£35.00ARBO 2650 Primer is a one part, solvent containing, air drying polyacrylate/ silane blend based primer.
Recommended for use in conjunction with the Arbosil Silicone, Arbomeric MP Range and Arbo EPDM Membrane System (please refer to ARBO Technical Services for full details) of products for the priming of porous surfaces such as concrete, block-work, brickwork etc.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For primers and cleaners, please click here.
ARBO Arbokol AG2 Porous Primer 500ml
£17.00Arbokol AG2 Porous Primer is a one-part solvent containing air drying isocyanate resin based primer.
MAIN APPLICATIONS
Recommended for use in conjunction with Arbokol AG2 and Arbokol 2150 two-part polysulphide sealants for the priming of porous surfaces such as concrete, block-work, brickwork etc.
APPLICATION INSTRUCTIONS
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Apply one coat of Arbokol AG2 Porous primer using a clean, dry brush and allow it to dry for a least 1 hour but not more than 8 hours before applying the sealant. All joint preparation and priming should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
JOINT SIZE SUITABILITY
The joint width should be at least 6mm in order that the joint faces can be cleaned and primed correctly.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For primers and cleaners, please click here.
ARBO Arbomeric MP20 Grey 600ml – Box of 25
£140.00Arbomeric MP20 is a one-part high modulus modified polymer sealant that cures on exposure to moisture vapour to form a tough but elastic rubber.
MAIN APPLICATIONS
Arbomeric MP 20 is recommended for many forms of construction, including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily-trafficked areas. NB Not recommended for joints in lightweight cladding and swimming pools. It is over-paintable once fully cured; pre-use tests are advised to demonstrate compatibility with individual paints.
APPLICATION INSTRUCTIONS
Joint Preparation
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes.
Joint Backing
Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam, should be used to provide the correct joint depth. All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants.
Application
Arbomeric MP20 is supplied in polyethylene 380ml cartridges and 600ml foils.
JOINT SIZE SUITABILITY
Joint Width
Minimum 6mm
Maximum 25mm (single application); 35mm (multiple applications)
Joint Depth
Minimum 10mm on porous substrates (12mm in floor joints)
Minimum 6mm on non-porous substrates (12mm in floor joints)
Maximum 20mm
Width: Depth ratio
(within above min/max restrictions)
2:1 butt joints
1:1 lap joints/floor joints
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this product, please click here.
Arbosil
Arbosil is a leading silicone sealant provider, offering a huge range of sealants suitable for use in a variety of projects. At Sealant Supplies, we specialise in providing leading brands for cost-effective prices to businesses across the UK.
Arbosil provide a range of sealants available in a variety of colours, making them suitable for use in projects where a seamless finish is required. As with all the brands we stock, we have tried and tested Arobsil sealants to ensure we are only providing the best possible options for our customers.
Arbosil also provide a leading swimming pool sealant which is highly sought after. Alongside this product, Arbo’s silicone sealants are also available for bulk purchase, making them ideal for use by trade specialists with a requirement for large amounts of sealant and adhesives.
For trade customers we also provide the option to create trade and credit accounts, where users can benefit from ongoing discounts and special offers. Our trade customers can gain ongoing orders and access to Arbosil’s product range.
For more information on the products we stock, or to talk tone of our specialists simply call us on 01708 525 866 or email info@sealantsupplies.co.uk and we’ll be in touch as soon as possible.
Shop by brand
