Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Kitchen

Kitchen
  • bathroom-and-kitchen-box-of-25

    Bond-It Bath-Mate Bath & Kitchen Sealant – Box of 25

    £44.00

    Bond-It Bath-Mate Bath & Kitchen Sealant

    Bond-It Bath-Mate is a high quality, permanently flexible, water-based sealant with excellent adhesion to plastic, ceramic tiles, wood and porcelain. It can be overpainted and is easy to use. Often this sealant is also used as a method to repair grout and improve the appearance of a tired and worn bathroom or kitchen.

    Uses

    Bond-It Bath-Mate BATH & KITCHEN SEALANT can be used to seal around ceramic baths, sinks and worktops, forming a watertight bond to the surfaces. Contains a powerful anti-fungal compound to prevent mould growth. Easy to apply and any mistakes can be easily rectified with water.

    Preparation

    All surfaces must be clean, dry, sound and free from dust, oil or any other contaminants that may hinder adhesion.

    Priming

    Bond It BATH & KITCHEN SEALANT does not require a primer on most common construction surfaces. To determine whether a primer is necessary, a sample should be tested. Contact Bond It Technical Service Department for recommendations.

    Application

    Apply using a standard sealant gun. Cut tip from the cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Smooth down within 15 minutes using a slightly wetted spatula. Remove excess product with a damp cloth. Do not saturate the surface with water, as this will delay curing the process.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Not suitable when:
    – Applied externally during rainy weather.
    – Applied at temperatures below +5°C.
    – Not suitable for plastic baths – use a sealant with greater flexibility.
    – Do not use in joints immersed continuously in water.
    – Can not be used in contact with bituminous products.
    – Used in areas of high abrasion, e.g. floor joints.
    – This product is not a silicone sealant!

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • gp200-box-of-25

    Bond-It GP200 Contractors Grade Silicone – Box of 25

    £48.75

    Bond-It GP200 is a multi-purpose, low modulus silicone rubber sealant with fungicide, suitable for most sealing jobs around the home.

    Uses

    Bond It GP 200 is ideal for sealing in areas of high humidity. Therefore it has excellent adhesion to glass, glazed surfaces, ceramic tiles, many plastics and most paints.

    It is suitable for the following applications – kitchen worktops, bathrooms, showers, utility rooms and general DIY applications.
    – Car
    – Boat
    – Caravan
    – House

    Preparation

    Ensure all surfaces are clean and free from grease. All types of cement, concretes and bare metal surfaces should be primed before the application of the silicone. Timber should be primed and painted.

    Application

    Apply using a sealant gun with the nozzle cut at a 45° angle, and to an opening slightly larger than the joint to be sealed. Smooth using a stick or plastic spatula wetted with a soap & water solution. Can not be applied to wet surfaces, although wetting immediately afterwards will not have any adverse effects. After that, tools can be cleaned in white spirit prior to curing taking place.

    Limitations

    Bond-It GP200  is not suitable for fixing of mirrors or sealing natural marble.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • multi-mate-box-of-25

    Bond-it Multi Mate GP Silicone – Box of 25

    £59.25

    Bond-it Multi Mate GP Silicone is a high modulus, acetoxy cure silicone sealant with fungicide, suitable for most sealing jobs around the home.

    Uses

    Bond-it Multi Mate has excellent adhesion to glass, glazed surfaces, ceramic tiles, aluminium, many plastics and most
    paints. It is ideal for the following applications – kitchen worktops, bathrooms, showers, utility rooms and general DIY applications.
    – Car
    – Boat
    – Caravan
    – House

    Preparation

    Ensure all substrates are dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, use a backing material, or a suitable backing tape or rod. All types of concretes and bare metal surfaces should be primed prior to the application of the silicone.

    Application

    Apply using a standard sealant gun with the nozzle cut at a 45° angle, and to an opening that is larger than the joint that is to be sealed. Tool using a piece of smooth wood wetted with soapy water.

    Bond-It Lami-Mate Timber Sealant is a polymer enhanced, flexible sealant and gap-filler designed for sealing all tongue and groove laminate flooring. When cured it can be varnished or wood stained if required.

    Uses

    Bond-It Lami-Mate stays permanently flexible and can be used for sealing all types of laminate and hardwood flooring. It can also be used for sealing around timber window and door frames as well as all types of fitted furniture. For example, bedroom and kitchen fittings, laminate worktops etc. LAMI-MATE is also suitable for sealing glass panels into kitchen unit doors. In addition, it is suitable for internal and external use.

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle with a sharpe blade, making sure not to damage the thread.  The nozzle should be cut to an opening slightly larger than the joint tha is to be sealed. Smooth down using a slightly wetted spatula, dampened with a soap & water solution.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use in conjunction with bitumen or asphalt. For perimeter use only, do not use in areas subject to mechanical abrasion. Furthermore, do not attempt to sand down.
    Caution: The colour on application will be different from the colour achieved when fully cured.

    Where bare ferrous metals, brass copper, lead or zinc cannot be primed, use Bond It ULTI-MATE Silicone Sealant. Furthermore, do not use on surfaces where water can penetrate through porous materials to affect the bond. Not suitable for fixing mirrors or sealing natural marble.

    Container Size

    EU3 plastic cartridge.

    Colours

    LAMI-MATE comes in 4 colours: teak, pine, dark oak and light oak.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • s3-sanitary-box-of-25

    Bond-It S3 Sanitary Sealant – Box of 25

    £57.75£67.75

    Bond-It S3 Sanitary Sealant is a one-part silicone sealant with excellent adhesion to ceramics, glass, melamine laminates and sanitary plastics.

    Uses

    Bond-It S3 Sanitary Sealant should be used for sealing around basins, bed basins, sinks & to seal shower trays and shower units. In addition, it has been specially designed to seal in damp and humid areas.
    It is ideal for use on:
    – Glass
    – Ceramics
    – Anodised aluminium
    – Lacquered metals
    – Painted timber
    – Painted plaster
    – Sanitary plastics
    – Primed or painted concrete
    – Primed metals

    Preparation

    Ensure all surfaces are dry and free from grease or any contaminants that may prevent adhesion. Remove any old sealant before application.

    Application

    Apply using a standard sealant gun. Using a sharp blade, cut the nozzle at a 45° angle, making sure not to damage the thread. The nozzle should be cut to an opening slightly larger than the joint you wish to seal. For sealing around bathtubs, the bath should be half-filled with water during application & throughout the curing process. If necessary masking tape may be applied. If significant gaps are to be filled, polythene foam, rod or tape should be used to provide support and minimise sealant wastage. Tool the joint within 5 minutes using a wet spatula to give a smooth finish & maximise the strength of the seal.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use on metal or concrete without priming. Not suitable for mirrors. Furthermore, for fixing mirrors use Bond It LN7, MIRROR-MATE or MIRROR-PRO Hybrid Adhesive.

    For all other Bond-It products on our website, please click here.

    For any further information you may need on Bond-It, please visit their website here.

  • Bond-It ZM10 Zero Meko Silicone – Box of 12

    £29.88

    Bond-It ZM10 Zero Meko Silicone is a specially developed sealant that gives off no solvents or corrosive vapours while curing. ZM10 cures quickly under all conditions when exposed to air.

    Uses

    Bond-It ZM10 is suitable for glazing, curtain walling, metal cladding, weather sealing and bonding of high movement joints. Its unique formulation gives exceptional tooling properties and durability. It is also suitable for sanitary applications including baths, showers, sinks and vanity units, etc. Accelerated ageing tests indicate a life expectancy of more than 25 years.
    It is ideal for use on:
    – Glass
    – Ceramics
    – All metals
    – Metal cladding
    – Concrete
    – Painted and unpainted timber
    – Brick
    – Plastics, including PVCu
    – All painted surfaces

    Application

    Apply using a standard sized sealant gun. Cut the nozzle at 45° angle, using a sharpe blade. Cut nozzle to an opening slightly larger than the joint to be sealed. To acheive a technically superior joint, use a polyethene foam backing rod, that is pushed into the joint before sealing. This will also minimuise how much sealant is used.

    Limitation

    Porous surfaces should be primed first. Do not use on substrates where water can penetrate through porous materials. Furthermore, this product is not suitable for use on natural stone where colour bleed may occur, use Bond It “The One” Silicone for these applications.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • C-Tec BT1 White 310ml

    £10.99

    C-Tec BT1 White can be used for all applications, including bathrooms, wet rooms, hospitals, clinics and all public health institutions; BT1 replaces Wood and P.U. adhesives, silicone sealants, sanitary silicone sealants, acrylic sealants and butyl rubber sealants.

    APPLICATIONS

    ● As a universal adhesive BT1 bond to most substrates, including woods, metals, brickwork, fibreglass, glass, ceramics, uPVC, concrete and most plastic (except PP, PE and PTFE), even in
    wet conditions and does not attack synthetic material.
    ● On mirror applications, apply in vertical strips (Not suitable for PP backed mirrors).
    ● C-Tec BT1 can also be painted but must be fully cured and is usable with all common water-based paints (not suitable with Alkyd Paints). For best results, prior testing is recommended.
    ● For application advice on powder-coated substrates, contact powder coating manufacturer.

    DIRECTION FOR USE

    ● Before use, ensure the cartridge has been stored at room temperatu
    ● Cut the Cartridge at the nose.
    ● Cut off nozzle at desired dimensions.
    ● Use a Skeleton or Powered Gun.
    ● Apply on a clean, degreased surface.

    Finish off the joints with MULTISOLVE.

    BT1: DELIVERY FORM

    ● 290ml Cartridges.
    ● Colours Available: White

  • bath-&-kitchen

    CM Bath & Kitchen HM

    £5.99

    Details:

    CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable sealant which is ideal for use within bathroom and kitchen environments.

    CM Bath & Kitchen is also suitable for use in a range of temperature environments, weathering extremely well and providing a reliable seal in joints. CM Bath & Kitchen is a premium silicone sealant product available in a range of colours, used for exceptional finishes.

    CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.

    Uses:

    The uses of CM Bath & Kitchen are but not restricted to the below:

    • Joints in baths and showers
    • General kitchen areas
    • Food prep areas
    • Laboratories
    • High hygiene areas
    • Construction Joints
    • Swimming pools
    • Glass, ceramic or painted surfaces

    Application:

    Before the application the required area must be cleaned, dust free, contaminate free, and no loose objects are present. If you wish to prime before use, standard primer is advised. If you are re-sealing joints, it is advised that every bit of old sealant is removed to ensure that the joint is contaminant free.

    To apply, cut off the top of the cartridge, ensuring it is above the nozzle thread, proceed to screw the nozzle and snipping the top of the nozzle to required joint size at a 45-degree angle. Apply the sealant by gun – place the nozzle angle flush to the joint and extrude a continuous bead. For a neat finish, use a sealant applicator tool kit.

  • ct1-sealant

    CT1 Sealant & Adhesive

    £12.95 £10.99

    CT1 Sealant and Adhesive

    The One-Stop Product for all Sealing and Bonding

    CT1 is a construction adhesive that will never shrink or crack and can be structured and painted with any type of paint. Unlike other sealants, CT1 can be applied onto wet surfaces, making it ideal for use underwater in marine projects.

    Due to its ability to work with water, it is also the ideal product to seal baths and shower trays, windows, doors, roofing and guttering. CT1 Sealant and Adhesive is extremely versatile and is often used across multiple different projects by tradespeople. Available in a range of colours, simply select from the drop-down menu: Clear, Black, Brown, Grey, White, Silver, Oak and Beige. For a wide range of internal sealant colours please refer to Mapesil AC.

    As an adhesive, CT1 will create a formidable bond between any substrate, for instance, metals, glass, mirror, fibreglass, plastics, and stone, concrete, the list is endless. CT1 is often the first port of call for a tradesperson looking for a reliable construction adhesive. Above all, the adhesive to use for a multitude of applications is CT1, creating a permanent bond that will resist extreme loads, pressure and tensile strain.

    Order online today, discounts available and trade and credit account options via our website.

  • Dowsil 785 Clean Room Sanitary Silicone – Box of 12

    £68.38

    Dowsil 785 is a Clean Room Sanitary Silicone Sealant that protects against bacteria growth, E. coli & Salmonella. Making it ideal for use in clinical hygiene areas.  

    Gives excellent adhesion to most non-porous surfaces. DC 785 comes in 5 colours, clear and white being the most commonly used.

    It is a one-component sealant, resistant to mould growth, ideal for sealing around sanitary fittings to give a water-resistant, hygienic seal. It is the product of choice for use in critical hospital hygienic areas, such as operation theatres & clinical clean rooms, due to it being able to protect against a range of bacteria growth. Making this product ideal for professionals that are working in clean environments.

    Dowsil 785 Clean Room defends against bacteria growth, MRSA, E. coli and Salmonella. Contains a powerful fungicide to resist mould growth.

    • High Modulus HM (see Wikipedia for a brief explanation).
    • Mould resistant Sealant.
    • Acetoxy cure type.
    • 5 to 10 minutes of working time.
    • Fast cure tack free in one hour.
    • Ideal for use in hospitals & clean rooms as well as domestic dwellings & commercial premises.

    Another option for a like for like comparison would be Everbuild 565 Clean Room.

    For all other Dowsil products that we stock, please click here

  • Dowsil 798 Cold & Clean Room Silicone

    £6.65

    Dowsil 798 Cold & Clean-room Silicone Sealant. The application used for sealing areas in refrigeration units and cold rooms, internal or external.

    Dowsil 798 Application

    Preparation

    Surfaces for application should be clean, free from dust, dry and stable. The temperature should be above 5 degrees for the use of DC 798.

    Back-up materials

    When back-up material is required, used a closed-cell polyethene backer rod that can be found in the related product section. AKA Joint backer rod.

    Finishing

    Once you have applied the Dowsil 798 into the joint, any tooling should be completed within five minutes.

    Clean-up

    If the sealant is misapplied to porous substrates, it should be left until just cured. Once cured then removed by peeling, cutting or other means ensuring not to damage plastic or coated surfaces.

    Joint design

    Width and depth of the application of Dowsil 798 are as following:

    6mm – 12mm width, a sealant depth of 6mm.

    12mm or above width, a width to depth ratio of 2:1 is required

    If you are using backing rod/backing jointing a minimum of 6mm sealant bite to each substrate is recommended.

    For further information about DC 798, please follow this link here.

    For our full range of Dowsil products, click here.

  • Dowsil 798 Cold & Clean Room Silicone – Box of 12

    £67.54

    Dowsil 798 Cold & Clean-room Silicone Sealant. The application used for sealing areas in refrigeration units and cold rooms, internal or external.

    Dowsil 798 Application

    Preparation

    Surfaces for application should be clean, free from dust, dry and stable. The temperature should be above 5 degrees for the use of Dowsil 798.

    Back-up materials

    When back-up material is required, used a closed-cell polyethene backer rod that can be found in the related product section. AKA Joint backer rod.

    Finishing

    Once you have applied the silicone into the joint, any tooling should be completed within five minutes.

    Clean-up

    If the sealant is misapplied to porous substrates, it should be left until just cured. Once cured then removed by peeling, cutting or other means ensuring not to damage plastic or coated surfaces.

    Joint design

    Width and depth of the application of product are as following:

    6mm – 12mm width, a sealant depth of 6mm.

    12mm or above width, a width to depth ratio of 2:1 is required

    If you are using backing rod/backing jointing a minimum of 6mm sealant bite to each substrate is recommended.

    For further information about Dowsil 798, please follow this link here.

    For our full range of Dowsil products, click here.

  • Dowsil C50 High Modulus Bath & Kitchen Silicone – Box of 12

    £41.16

    Dowsil C50 is a high modulus silicone sealant, suitable for all sanitary applications & is available in White or Clear.

    HOW TO USE

    Preparation

    Surfaces are to be clean and dry, with no dust or dirt present on the joint. Any old sealant must be removed to avoid contamination and affect the adhesion.

    Priming

    Priming the surface is not required so long as the area of application is nonporous. It is always recommended to do a small test before the complete application is started.
    For more advice, please see the tech data sheets attached or contact for technical assistance.

    Finishing

    If you require finishing or tooling off to the applied Dowsil C50, giving it a smooth and professional. This tooling must be done within 5 minutes. Any longer and the Dowsil C50 will have had time to skin and adhere to the substrate.

    Clean-Up

    The excess sealant may be cleaned off tools and non-porous surfaces while in an uncured state using a universal cleaner. If the sealant is misapplied to porous substrates, it should be left until just cured, and then removed by peeling or cutting from the area.

    Joint Size

    When applying the Dowsil C50, the minimum width should be 6mm.

    6mm to 12mm width – 6mm depth.

    12mm width – depth ratio of 2:1

     

    Please read the product and safety data sheets before use.

    For all other Dowsil Products on our website, please click here.

    For any further information you may need on this product, please visit Geocels website here.

Kitchen Sealants

Kitchen sealants are used by both professionals and DIY novices to seal tight corners and often the edges of worktops. Brands such as Bond-It, Dow Corning and Everbuild are some of our most popular kitchen sealants.

At Sealant Supplies we only stock the highest quality brands and an extensive range of colours; therefore, we have something for every kitchen project. We also stock a variety of application tools for sealants, acting as your one stop shop for all your sealant requirements.

We have carefully selected the products we stock to ensure our clients only benefit from the highest quality kitchen sealants and grout. We have tried and tested our products to ensure our clients get the best results every time.

Food grade silicone sealant is a type of silicone sealant with very low toxicity. Made with FDA-approved silicone sealant and fungicide, food grade sealants are designed specifically for food contact applications such as refrigerator seals and food preparation areas.

We stock large quantities of kitchen sealants, therefore if you have the requirement for regular deliveries of large quantities, you don’t need to look any further than SSL. We also provide a range of account types including trade and credit.

If you are unsure what sealant is most suitable for your project, or to discuss opening a trade account with us, do not hesitate to get in touch with our team.