CM SFS Stain Free Silicone is a moisture-cured one-component neutral silicone sealant used mainly for building and glazing joints. With it moisture cure allowing it to cure at room temperature, producing a flexible seal. CM SFS Stain Free Silicone adheres to most common building surfaces without the need for primer. Fully cured movement capability of -/+50%.
CM SFS is designed for jointing or bonding in building and glazing applications such as:
Please see the attached datasheet for more information on CM SFS Stain Free Silicone.
EB25 has been launched in 2019 to celebrate their 25 years of Everbuild.
EB25 is the Ultimate Sealant and Adhesive, covering the broadest range of application, sealant and adhesive areas. It is a polymer blend sealant giving it additional flexibility and bonding strength you can rely on in any situation. The makeup of this product allows the sealant to be used both internally and externally, in most weather conditions and can be used underwater. Everbuild have had EB25 certified for use in sanitary and food preparation areas and once cured is resistant to mould, temperature extremes, chemicals and more
Colours – Black, White and Grey. Also, Crystal Clear that remains crystal clear and does no fog like similar products.
Substrates that EB25 bonds to:
Everbuild brings you their best ever sealant and adhesive – EB25, to celebrate their 25th anniversary. Using the most cutting-edge technology and an exclusive polymer blend, our R&D team has developed a truly universal, top quality hybrid. Therefore, it is incredibly flexible, certified for indoor and outdoor use, and in sanitary and food preparation areas (ISEGA). Plus, it’s powerful, sticks to just about anything and even works when applied underwater! Once cured, it’s resistant to mould, temperature extremes, chemicals, petrol, UV radiation, plus it does all this while being environmentally friendly.
Bonding & sealing in almost every application imaginable. The following are just some examples: As a high-quality nail replacement adhesive, even to damp surfaces.
– External and internal pointing around doors and windows.
– Bonding mirrors to most common substrates.
– Sealing vertical expansion joints.
– Jointing cladding panels.
All surfaces must be clean and dust-free. Surfaces may be damp but have no standing water. Therefore, it can be used underwater, but adhesion performance is reduced so should be applied as an emergency repair in these conditions only.
For any further information you require on Everbuild products, please visit their website here.
This product is Everbuild’s equivalent of the CT1 range and can be used like for like.
Everbuild Everflex 175 is a sealant that is acrylic based & suitable for internal and external use. It provides a flexible long lasting seal that adheres to virtually all materials. In addition, Everbuild Everflex 175 can be overpainted.
– PVCu profile, trim and cladding.
– Internal sealing around PVCu window and door frames.
– Sealing cracks and gaps in brickwork, stone and concrete.
– Gap and crack filler before decorating.
– Sealing around baths and basins.
– Permanently flexible
– Mould resistant.
– Easy cleanup.
All surfaces must be clean and dust free. All flaking or loose surface coatings should be removed as should any old mastic before application. Highly porous substrates should be primed before application with Everbuild PVA bond diluted 1:4 with water.
Using a sharp stanley blade, cut the tip of the cartridge, taking care not to damage the thread. Apply nozzle and again, cut cleanly at a 45° angle, with the opening being slightly larger than the gap to be sealed. Apply product using a standard sealant gun.
– Not for use in conjunction with bitumen or asphalt.
– Do not attempt to abrade when cured.
– Do not use around shower trays. Use GENERAL PURPOSE SILICONE for greater movement capabilities
– Overpainting is not necessary.
Note: this product is flexible. Certain inferior quality paints (especially certain vinyl matts) have very little movement in the dry film. However, it is possible for the dry paint film to crack if the movement is excessive.
For all other Everbuild products on our website, please click here.
Any further information you may need on any Everbuild products, visit their website here.
Automotive sealants are highly sought after, with industry specialists regularly looking for the best possible deals and products on the market. At Sealant Supplies Ltd, we are passionate about supplying leading sealant products at reasonable prices.
As part of this ethos, we also provide discounts on trade and credit account orders. We understand the demand for high quality products in the automotive industry, therefore we only stock reputable brands for our customers to select from.
Our automotive sealant range includes products from Everbuild and CM Sealants, however we are regularly reviewing our stock list to ensure we are providing the best possible products on the market. We also provide next day delivery on a large range of items, please enquire with our team if you have a requirement for short delivery times.
Whatever your requirements, our experienced team are here to assist you. We are available to answer any questions you may have about our product range, if you are looking for a particular automotive sealant that you can’t find via our website do not hesitate to contact our team and we will do our best to help you.
Simply call 01708 525866 or email email@example.com and we will be in touch.