Tile Flooring

• 

  CM SFS Stain Free Silicone

  £5.85

  CM SFS Stain Free Silicone is a moisture-cured one-component neutral silicone sealant used mainly for building and glazing joints. With it moisture cure allowing it to cure at room temperature, producing a flexible seal. CM SFS Stain Free Silicone adheres to most common building surfaces without the need for primer. Fully cured movement capability of -/+50%.

  Typical Uses

  CM SFS is designed for jointing or bonding in building and glazing applications such as:

  • Precast panels and curtain wall expansion joints.
  • Windows or doors perimeter joints
  • Aluminium, wood, UPVC glazing joints.
  • Roofs and chimney joints.
  • Venting or gutter joints
  • Bonding mirrors
  • Kingspan panels

  Limits of Use

  • CM SFS is not recommended for use on materials where migration of constituents can take place, e.g. certain rubbers.
  • Not be used for jointing aquariums or swimming pools. Not ideal for permanent immersion.
  • CM SFS, once cured, should not be painted (poor coverage and adhesion of paint).
  • CM SFS is not recommended where abrasion or physical abuse will be encountered.
  • CM SFS must not be used for food contact.
  • When in contact with alkyd paints a slight yellowing can appear on the surroundings of the joint.

   

  Please see the attached datasheet for more information on CM SFS Stain Free Silicone.

  Select options

  View Details
• 

  CT1 Sealant & Adhesive

  £12.95 £10.99

  CT1 Sealant and Adhesive

  The One-Stop Product for all Sealing and Bonding

  CT1 is a construction adhesive that will never shrink or crack, and it can be structured and painted with any type of paint. When applying conventional sealants, the surfaces have to be dry. As a sealant, CT1 can be applied onto wet surfaces, even underwater.

  It is also the perfect product to seal baths and showers, windows, doors, roofs, gutters, virtually anything. Available in a range of colours, simply select from the drop-down menu: Clear, Black, Brown, Grey, White, Silver, Oak and Beige. For a wide range of internal sealant colours please refer to Mapesil AC.

  In other words, it is the only product on the market that is 100% ecologically compliant. As an adhesive, CT1 will create a formidable bond between virtually any materials also acting as a construction adhesive that will successfully bond all building materials. For instance, metals, glass, mirror, fibreglass, plastics, and stone, concrete, the list is endless.

  Above all, the adhesive to use for a multitude of applications is CT1, creating a permanent bond that will resist extreme loads, pressure and tensile strain.

  Will successfully bond

  • Polystyrene
  • Metals (including lead)
  • Glass – Special mirror adhesive can be found here.
  • Mirrors
  • All Woods
  • Plastics (excluding Polypropylene)
  • Fibreglass
  • Tiles
  • Concrete
  • Most Stones (without staining)
  • Most Synthetic Materials

  Unique adhesion on virtually any material in most applications without the need for additional fixings. Therefore, CT1 is the ultimate solution for interior and exterior bonding and sealing.

  • Excellent resistance to chemicals
  • UV resistant
  • Perfect for marine and boating maintenance, accident and emergency repairs
  • Odourless
  • Does not shrink
  • Can be painted
  • Contains no solvents
  • No isocyanates
  • Unique flexibility
  • 8 colours to choose from Black, Brown, Grey, White, Oak, Clear, Beige and Silver. For further information on this product, please visit the CT1 website here.

  Select options

  View Details
• 

  Everbuild Aqua Mate

  £5.99 £3.29

  Everbuild Aqua MateEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal.

  USES

  – All sealing applications in aquaria.
  – Sealing pond liners and all supply/drainage piping.

  CHARACTERISTICS / ADVANTAGES

  – Everbuild Aqua Mate is free from fungicide and solvent – will not harm fish.
  – Fast cure – gives quick early strengths.
  – Extremely low dirt pick up.
  – Will withstand continuous water immersion.

  PREPARATION

  All surfaces must be dry and dust free. Loose surface coatings, and old sealant and mastic joints, should be removed before application. All glass must be cleaned before use.

  APPLICATION METHOD / TOOLS

  Surfaces must be clean, free from dust, grease and other contaminants.

  The joint must conform of two parts: Sealing joint: the depth of which must be identical to the width of glass used.

  LIMITATIONS

  – Not for use on surfaces that may bleed oils, solvent or plasticisers.
  – As pond materials vary in quality, always test a small area first for adhesion.
  – Always wash out areas after use to remove any residual acetic acid. Testing the pH before use is recommended.
  – Allow the sealant to cure before moving/filling with water fully.

  For all other Everbuild products on our site, please view here.

  For any further information on any Everbuild products, please visit their website here.

  Add to basket

  View Details
• 

  Mapei Fuga Fresca – Grout Reviver (26 Colours)

  £8.95 £6.65

  Mapei Fuga Fresca is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application.

  During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn’t have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, or you can use a damp sponge. As it is water based, you shouldn’t struggle to clean it off as you go.

  RECOMMENDATIONS

  Areas of use, simply put, any internal grout, it is not recommended for external grout or any grout that is constantly immersed in water, i.e. swimming pools, basins etc. Epoxy grout is an exception as it is already stain proof. It would also be advised not to use the Fuga Fresca on friable grout, anything loose or not crumbly, as it simply won’t work. If after the first application the colour difference between the original grout and the first coat of Fuga, it may be the case of needing an additional coat to strengthen the colour. This only works on grout, please do not use on silicone.

  APPLICATION

  Ensure that the joints are free from loose parts, dirt and any mould free. Once cleaned, the grout joint needs to be dry before the application of the Fuga Fresca and after the application any overlay on the tiles to be removed as mentioned above. Once finished with the Fuga Fresca, it’s advised to thoroughly clean the sponge end; this can be done by running it under a tap.

  COLOURS AVAILABLE

  Available in 34 colours of the “MAPEI coloured grouts” range to match the AC silicone range, which you can view here. Alternately, these colours also match the Mapei Ultracolor Plus grout range, that can be found here.

  STORAGE

  Twenty-four months from manufacture date, sealed in its original container stored under normal conditions, protect from frost.

  SAFETY INSTRUCTIONS APPLICATION

  Please refer to the safety and technical data sheet for more information on the safety instructions, and applications.

  Furthermore, for more information on this product, please visit the Mapei website here.

  Select options

  View Details