Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Wood Flooring Sealants

  • lami-mate-box-of-12

    Bond-It Lami-Mate Timber Sealant – Box of 12

    £29.04

    Bond-It Lami-Mate Timber Sealant is a polymer enhanced, flexible sealant and gap-filler designed for sealing all tongue and groove laminate flooring. When cured it can be varnished or wood stained if required.

    Uses

    Bond-It Lami-Mate stays permanently flexible and can be used for sealing all types of laminate and hardwood flooring. It can also be used for sealing around timber window and door frames as well as all types of fitted furniture. For example, bedroom and kitchen fittings, laminate worktops etc. LAMI-MATE is also suitable for sealing glass panels into kitchen unit doors. In addition, it is suitable for internal and external use.

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle with a sharpe blade, making sure not to damage the thread.  The nozzle should be cut to an opening slightly larger than the joint tha is to be sealed. Smooth down using a slightly wetted spatula, dampened with a soap & water solution.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use in conjunction with bitumen or asphalt. For perimeter use only, do not use in areas subject to mechanical abrasion. Furthermore, do not attempt to sand down.
    Caution: The colour on application will be different from the colour achieved when fully cured.

    Container Size

    EU3 plastic cartridge.

    Colours

    LAMI-MATE comes in 4 colours: teak, pine, dark oak and light oak.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • CM-SFS-Stain-Free

    CM SFS Stain Free Silicone

    £5.85

    CM SFS Stain Free Silicone is a moisture-cured one-component neutral silicone sealant used mainly for building and glazing joints. With it moisture cure allowing it to cure at room temperature, producing a flexible seal. CM SFS Stain Free Silicone adheres to most common building surfaces without the need for primer. Fully cured movement capability of -/+50%.

    Typical Uses

    CM SFS is designed for jointing or bonding in building and glazing applications such as:

    • Precast panels and curtain wall expansion joints.
    • Windows or doors perimeter joints
    • Aluminium, wood, UPVC glazing joints.
    • Roofs and chimney joints.
    • Venting or gutter joints
    • Bonding mirrors
    • Kingspan panels

    Limits of Use

    • CM SFS is not recommended for use on materials where migration of constituents can take place, e.g. certain rubbers.
    • Not be used for jointing aquariums or swimming pools. Not ideal for permanent immersion.
    • CM SFS, once cured, should not be painted (poor coverage and adhesion of paint).
    • CM SFS is not recommended where abrasion or physical abuse will be encountered.
    • CM SFS must not be used for food contact.
    • When in contact with alkyd paints a slight yellowing can appear on the surroundings of the joint.

     

    Please see the attached datasheet for more information on CM SFS Stain Free Silicone.

  • ct1-sealant

    CT1 Sealant & Adhesive

    £12.95 £10.99

    CT1 Sealant and Adhesive

    The One-Stop Product for all Sealing and Bonding

    CT1 is a construction adhesive that will never shrink or crack, and it can be structured and painted with any type of paint. When applying conventional sealants, the surfaces have to be dry. As a sealant, CT1 can be applied onto wet surfaces, even underwater.

    It is also the perfect product to seal baths and showers, windows, doors, roofs, gutters, virtually anything. Available in a range of colours, simply select from the drop-down menu: Clear, Black, Brown, Grey, White, Silver, Oak and Beige. For a wide range of internal sealant colours please refer to Mapesil AC.

    In other words, it is the only product on the market that is 100% ecologically compliant. As an adhesive, CT1 will create a formidable bond between virtually any materials also acting as a construction adhesive that will successfully bond all building materials. For instance, metals, glass, mirror, fibreglass, plastics, and stone, concrete, the list is endless.

    Above all, the adhesive to use for a multitude of applications is CT1, creating a permanent bond that will resist extreme loads, pressure and tensile strain.

    Will successfully bond

    • Polystyrene
    • Metals (including lead)
    • Glass – Special mirror adhesive can be found here.
    • Mirrors
    • All Woods
    • Plastics (excluding Polypropylene)
    • Fibreglass
    • Tiles
    • Concrete
    • Most Stones (without staining)
    • Most Synthetic Materials

    Unique adhesion on virtually any material in most applications without the need for additional fixings. Therefore, CT1 is the ultimate solution for interior and exterior bonding and sealing.

    • Excellent resistance to chemicals
    • UV resistant
    • Perfect for marine and boating maintenance, accident and emergency repairs
    • Odourless
    • Does not shrink
    • Can be painted
    • Contains no solvents
    • No isocyanates
    • Unique flexibility
    • 8 colours to choose from Black, Brown, Grey, White, Oak, Clear, Beige and Silver. For further information on this product, please visit the CT1 website here.
  • everbuild-lumberjack-550

    Everbuild Lumberjack 550

    £6.95 £4.58

    Everbuild Lumberjack, 550-floor adhesive is a high spec, hybrid polymer, cartridge or foil pack applied adhesive. It is specially designed for fixing all types of wooden floors directly onto all common building substrates. EVERBUILD® Lumberjack® 550 Floor Adhesive has the following benefits: Free of water & active solvents, so will not cause any warpage. It is also a rapid setting & permanently flexible. Can be used with underfloor heating as it has excellent acoustic properties.

    USES

    Fixing all types of wooden floors onto all common building surfaces.

    CHARACTERISTICS

    Everbuild Lumberjack is free of water & active solvents, so will not cause any warpage or curl to woodblocks/planks.

    – Permanently flexible – compensates for subfloor movement.
    – Will bond wood directly to all common flooring substrates.
    – Due to its high flexibility, it is ideal to use with underfloor heating.
    – Excellent gap filling properties for uneven surfaces
    – Gives unique sound deadening & acoustic properties.

    APPLICATION METHOD / TOOLS

    All installations and subfloor preparations must be carried out in line with the relevant British or international standards. Cut off the tip of sausage and place into a suitable cartridge, then cut off the top of the nozzle flat to leave an 8mm opening. Cut a V-shape down into the nozzle to a depth of around 10mm.

    Fix nozzle and place cartridge into the sealant gun. Hold the gun at 90° to the floor and apply a triangular-shaped bead, approx 8mm wide and 10mm high. Position blocks/planks while the adhesive is still tacky (within 30mins) and taps into final position with mallet and block, removing uncured resin with EVERBUILD WONDER WIPES.

    Floors may be sanded/ trafficked 12-24 hours after application, depending on site conditions (longer at low temperatures).

    If the surface has no or little absorbency; allow three days before sanding/trafficking.

    LIMITATIONS

    – Always refer to the flooring manufacturer re any specific instructions/requirements specifically relating to their flooring before fitting floors.
    – Do not use against substrates that are likely to bleed oils or plasticisers

    VALUE

    All technical data is based on our laboratory tests. However, actual measured data may vary due to circumstances beyond our control.

    ECOLOGY, HEALTH AND SAFETY

    Consult MSDS for the full list of hazards.

    For further information on any Everbuild products, please visit their website here.

  • ndd-everbuild-wonder-wipes

    Everbuild Multi-Use Wonder Wipes

    £7.49 £4.05

    Everbuild Multi-Use Wonder Wipes are specially formulated to clean hands, tools and surfaces from sealant, adhesive, bitumen, expanding foam, oil, grease and even wet or semi-dry paint. These wipes are particularly useful when there is no water on site.

    Removes dirt, grime, oil, grease, petrol, inks, food stains, part-cured sealant and paint smears.

    Wonder Wipes Uses

    Cleaning a wide range of construction materials, such as sealant, adhesive, bitumen, expanding foam, oil, grease and even wet or semi-dry paint from hands, tools and surfaces.

    Limitations

    – It is not advised to use these wipes on porous services, such as untreated wood.
    – Do not dispose of wipes in toilets.
    – Long periods of skin contact should be avoided for those who have damaged or sensitive skin.
    – If in doubt, we advise you to contact the technical services department for advice.

    For all other specialist cleaning products on our website, please click here.

    For any further information, you may need, please visit the Everbuild website here.

  • everbuild-timber-laminate

    Everbuild Timber and Laminate

    £3.99 £2.47

    Everbuild Timber & Laminate is a sealant and gap filler, designed for sealing around fitted furniture, laminate flooring and kitchen units. It has been formulated using lightfast pigments, offering a range of 4 colours – for a near or exact match to most popular laminate floors and melamine board finishes. Everbuild Timber & Laminate Sealant is a solvent-free silicone and leaves a matt finish, which will not pick up dirt and can be easily cleaned with standard household products. If desired, the product can be painted, varnished or wood stained.

    USES

    – Sealing around the perimeter of all types of laminate and hardwood flooring; provides a flexible decorative seal that accommodates the natural movement of wood.
    – For draughtproofing around timber flooring to provide an airtight seal.
    – For sealing around all types of fitted furniture, e.g. bedroom fittings, laminate worktops etc.
    – Sealing internally around hardwood and softwood joinery components such as door frames.
    – Ideal for internal wood stained finishes.

    CHARACTERISTICS / ADVANTAGES

    – Permanently flexible/durable polymer-rich formula.
    – The extensive colour range gives a near on exact match to most common fitted furniture, laminate floor and kitchen worktop colour schemes.
    – Silicone and solvent-free – low odour.
    – Contains a fungicide to protect against mould growth in the sealant.
    – Adheres to most common substrates.
    – Non-hazardous formula – water clean up.
    – Can be painted, varnished or stained once cured.
    – Easy to apply and tool

    APPLICATION METHOD / TOOLS

    Cut the tip of the cartridge with a sharp blade, taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45°. Apply using a standard sealant gun. Smooth the sealant down using a wetted spatula, piece of wood or gloved finger. Any mistakes can be rectified by removing sealant with a damp sponge or cloth before re-applying. If overpainting or staining, allow to fully cure first (24-48 hours at normal temperatures).

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    LIMITATIONS

    – Not for use in conjunction with bitumen or asphalt.
    – It is the user’s responsibility to determine suitability for purpose. If in doubt, please phone the technical services department for advice.

    For all other Everbuild products on our website, please click here.

    For any further information, you may need on Everbuild’s products, please visit their website here.

  • SikaBond 52 – Wood Floor Adhesive 600ml

    £169.99 £131.99

    SikaBond 52 is a fast curing elastic wood flooring adhesive for professional use, available in both large and small sausages for a gun or specific dispenser application.

    Uses

    • SikaBond 52 s is for full-surface bonding of solid and engineered wood floors (strips, long strips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chipboards, plywood and OSB can be bonded

    Full Surface Bonding with SikaBond® Dispenser-1800 / -5400:

    • Solid and engineered wood floors (strips, long strips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet as well as chipboards can all be bonded. For detailed application instructions, refer to the Method statement of the SikaBond® Dispensers series or contact our Technical Department

    For the Sika® AcouBond®-System:

    • Solid wood boards (tongued and grooved), 3-ply engineered wood as well as chipboards plywood and herringbone blocks can all be bonded For detailed application instructions refer to the Product Data Sheet of the Sika® AcouBond®-System, or contact our Technical Department

    For Beaded Application:

    • Solid wood boards, 3-ply engineered wood, as well as chipboards, can be bonded.

    Characteristics / Advantages

    • 1-component, ready to use
    • Fast curing properties
    • Floors can be sanded after 12 hours (full surface bonding, +23°C / 50% r. h., up to 1 mm adhesive thickness)
    • Excellent workability, effortless to extrude
    • Good initial tack
    • Elastic, footfall sound-dampening adhesive
    • Suitable for most common types of wood floors
    • Especially suitable for problematic woods including beech, maple and bamboo
    • Suitable for bonding wood floors directly onto old ceramic tiles
    • Reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate
    • Suitable for use with subfloor heating
    • Compensates for some substrate unevenness
    • Solvent-free
    • Odourless

    Approvals / Standards

    EMICODE EC 1PLUSR, very low emission

    Curing Rate

    The floor can be walked on / sanded 12 hours to 24 hours after installation.

    Skin Time / Laying Time

    ~ 60 minutes (+23°C / 50% r. h.)

    Substrate Moisture Content

    Permissible substrate moisture content:

    • 2.5% CM for cement screed (ca. 4% Tramex / Gravimetric weight percent).
    • 0.5% CM for anhydrite screed. 3 – 12% CM for magnesite flooring (dependent on the proportion of organic components).

    Permissible substrate moisture content for use with underfloor heating:

    • 1.8% CM for cement screed (ca. 3% Tramex / Gravimetric weight >percent).
    • 0.3% CM for anhydrite screed.
    • 3 – 12% CM for magnesite flooring (dependent on the proportion of organic components).

    Furthermore, for moisture contents and the quality of substrates, the guidelines of the wood floor manufacturer as well as standard construction rules must be observed.

    For all other Sika products on our website, please click here.

    For any further information, you may need, please visit the Sika website here.

  • Soudaseal-215LM

    Soudal Soudaseal 215LM – 600ml

    £4.99

    Soudal Soudaseal 215LM is a 1-component, moisture-curing, low-modulus elastic joint sealant. Soudal Soudaseal 215LM is designed for the elastic joint sealing and waterproofing of movement and connection joints in buildings. Due to its very low modulus, it is also suitable for EIFS Facades.

    Characteristics / Application Areas

    – Tested and conform to ISO 11600-F-25LM
    – High bond strength on nearly all surfaces
    – Excellent adhesion and extrudability, even in adverse conditions
    – High-performance mechanical properties
    – Almost odourless
    – No bubble formation within sealant, even in wet and humid conditions
    – Primerless adhesion on many substrates (except where water pressure may occur)
    – Colour stable and UV resistant
    – Ecological advantages – free of isocyanates, solvents, halogens and acids
    – Over-paintable with all water-based paints.
    – Weather-resistant to all climates.
    – Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames.

    Directions for use

    Method: Manual- or automatic caulking gun
    Application temperature: +5°C to +35°C
    Surface temperature: > +5°C
    Tooling: soapy solution before skin formation
    Repair with: Soudaseal 215 LM

Wood Floor Sealants

Suitable for both commercial and domestic use, our wood flooring sealant range consists of industry leading brands and highly sought-after products.

When browsing our website, you will find everything you need to install your wood flooring, including a range of adhesives and sealants which are suitable for a range of substrates and application processes. Alongside our sealants we stock accessories, application guns and profiling tools.

Installing a wooden floor doesn’t need to be a difficult task. Having the right sealants and accessories for your project will make the process seamless and snag-free. Often our sealants are used by both trade professionals with a requirement for bulk orders and by the DIY novice.

Our range of wood floor sealants can be used by a range of customer types, with our pricing structure also offering discounts for our customers. For trade clients we do provide the option to create an account for ongoing discounts on large orders.

At Sealant Supplies we are regularly updating our stocklist to provide the best possible products to our clients. If there is a particular product you have in mind which isn’t listed on our website, do not hesitate to get in touch with our team and we will assist you.

Call 01708 525 866 to speak with a member of our team.