Everbuild Everflex 195 Siliconised Acrylic 300ml
£2.10 inc. VAT
£1.75 ex. VAT
- Product ID: 482346
- Suitable For: sealing cracks and gaps in brickwork, stone & plaster.
- Area of use: INT
- Application Method: silicone gun
- Volume: 300ml
- Container Type: cartridge
- Type: sealant
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Everflex 195 Siliconised Acrylic Sealant is a siliconised acrylic sealant, suitable for internal and external use, that provides a permanently flexible long lasting seal which adheres to virtually all materials. Everflex 195 has a powerful fungicide to prevent mould growth and improved adhesion characteristics when compared to conventional acrylic sealants.
Advantages
– Permanently flexible.
– Adheres to most surfaces.
– Mould resistant.
– Easy cleanup.
For all other Everbuild products on our website, please click here.
Any further information you may need on Everbuild products, please visit their website here.
– PVCu profile, trim and cladding.
– Internal sealing around PVCu window and door frames.
– Sealing cracks and gaps in brickwork, stone & plaster.
– An adhesive for bonding polystyrene coving and tiles.
– An adhesive for bonding cork tiles and wood block flooring.
– Gap and crack filler prior to decorating.
APPLICATION
SUBSTRATE PREPARATION
All surfaces must be clean and dust free. Highly porous surfaces should first be primed with Everbuild PVA bond diluted 1:4 with water.
APPLICATION METHOD / TOOLS
Using a sharp knife, or the Bond-it Snip Off Tool, cut the tip of the cartridge. Take care not to damage the thread. Apply using a standard sealant gun. Ideally, the joint depth should be half of the width. Smooth down within 20 minutes of application using a wetted spatula or piece of wood. You should take care at this point not to soak the surface because this will delay drying. The product can be overpainted after 60 minutes.
CLEANING TOOLS
Any excess sealant can be cleaned away using a sponge dampened in lukewarm water.
LIMITATIONS
– Not for use in conjunction with bitumen.
– Do not attempt to abrade when cured.
– Can not be used around shower trays.
– Overpainting is not necessary. However, the product can be painted.
Note: this product is flexible. Certain inferior quality paints (especially certain vinyl matts) have minimal movement in the dry film. It is possible for the dry paint film to crack if the movement is excessive. Should not be used in a condition of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints).
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From: £1.40 inc. VAT
£1.17 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.64 inc. VAT
£2.20 ex. VAT
From: £6.64 inc. VAT
£5.53 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £2.76 inc. VAT
£2.30 ex. VAT
From: £6.16 inc. VAT
£5.13 ex. VAT
From:
From:
From:
From:
From: £144.90 inc. VAT
£120.75 ex. VAT
-
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal -
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal -
£23.04£18.11 inc. VAT£19.20£15.09 ex. VATBond It Trowel Mastic can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound. Storage Life Minimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use. For all other Bond-it -
£3.32 inc. VAT
£2.77 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
Reviews
There are no reviews yet.