ARBO Arbothane 1245 Self Levelling Grey 600ml – Box of 20

Recommended for use in both interior and exterior applications to seal joints in floors and walkways exposed to pedestrian and vehicle traffic in warehouses, garages and factory floors. For concrete and porous surfaces, it is recommended that Arbokol AG2 Porous Primer is used to promote the correct adhesion. For other materials, e.g. plastics, PVC, aluminium and lacquered metal, preliminary testing is recommended to determine whether priming is required. Refer to Arbo Technical Services for further information 

NB: Not recommended for use against natural stone.

APPLICATION

Joint Preparation 

The joint surfaces must be even, clean, dry, and free from all contamination. The surfaces should be degreased using the appropriate Arbo Cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services Department should be consulted and advice obtained with regard to the choice of primer for specific purposes. 

Joint Backing 

Where applicable, appropriate joint filler, e.g. closed-cell polyethylene foam, should be used to provide the correct joint depth. 

Application 

All joint preparation, priming, and sealant application should be carried out in accordance with BS 8000 Part 16, the British Standard for the sealing of joints in buildings using sealants. Arbothane 1245SLis supplied in 600ml foil packs and can be applied into the joint using an Arbo Foil Pack Gun

JOINT SIZE SUITABILITY 

Joint Width 

Minimum 6mm 

Maximum 25mm (single application); 

for advice on multiple applications, please contact Adshead Ratcliffe Technical Services Department. 

Joint Depth 

Minimum 10mm on porous substrates 

Minimum 6mm on non-porous substrates 

Maximum 20mm 

Width: Depth ratio 

(within above min/max restrictions) 

2:1 butt joints