FOSROC Nitoseal PU800 – 2 Litre Tin

FOSROC Nitoseal PU800 is primarily for sealing internal joints subject to abrasion & heavy loading, or where chemical resistance is needed. Can be used in warehouses and distribution centres. It is, particularly useful forklift trucks are in use. Nitoseal PU800 can also be used where joints would be subject to shoes with high heels, shopping malls, podiums etc. It is able to be used in prisons as an anti-pick sealant for sealing internal partitions, cell doors and windows, fittings and furniture.

APPLICATION

Preparation

Joint surfaces shall be dry, clean and free from contamination. Any voids or gaps at the base of the sealing slot should be filled, and a suitable bond breaker should be pushed into construction and contraction joint slots. Where a particularly neat finish is required mask edges of joint before priming (if needed) and application.

Priming

Where surface shall be subject to submersion or permanently damp, joints should be primed using Fosroc Primer MS2. Decant the entire contents of primer curing agent into the primer base tin and replace the lid. Mix thoroughly by shaking tin for about 2 minutes. Apply the primer using a clean, dry paintbrush. Nitoseal PU800 should be applied between 30 minutes and 4 hours after priming.