Sika Hyflex 250 Facade – 600ml – Box of 20

(1 customer review)

From: £375.22 inc. VAT
£312.68 ex. VAT

Checkout
  • Suitable For: elastic joint sealing and the waterproofing of movement and connection joints in building envelopes
  • Area of use: INT & EXT
  • Application Method: barrel gun
  • Volume: 600ml
  • Container Type: foil
  • Type: sealant
  • Colour: 5 colours
  • Brand: Sika
  • Manufactuer: Sika
  • Box Size: 20
Features & Benefits

SikaHyflex 250 Facade is a high performance over paintable 1-part, moisture curing, low modulus, professional weatherproofing sealant for concrete, masonry and EIFS facades.

 

Sika Hyflex 250 Facade is a 1-component, moisture-curing, low-modulus elastic joint sealant.

CHARACTERISTICS / ADVANTAGES

– Excellent weathering resistance
– Bubble-free curing
– Low stress to the substrate
– Perfect extrusion and workability
– Excellent adhesion to many different substrates
– Solvent-free
– Very low emissions

 

For a barrel gun, click here. For smaller cartridges, click here.

For all our Sika products on our website, please click here.

Any further information you may need on Sika / Everbuild products, please visit their website here.

 

SikaHyflex 250 Facade – suitable for elastic joint sealing and the waterproofing of movement and connection joints in building envelopes. Due to its very low modulus, SikaHyflex 250 Facade is also suitable for EIFS Facades.

APPLICATION

SUBSTRATE PREPARATION
The substrate must be clean, dry and free from oils, grease, etc. SikaHyflex 250 Facade doesnt require a primer. However, for optimum adhesion in areas such as on multi-story buildings, highly stressed joints, severe weather exposure, the following priming and/or pretreatment procedures shall be followed:

Non-porous substrates
Aluminiums, stainless and galvanised steel, powder coated metals or glazed tiles have to be cleaned and pre-treated. Allow a flash-off time of >15 minutes before sealing,
Other metals such as copper, brass and titanium, also need to be cleaned and pre-treated. Apply Sika Primer-3 N after the necessary flash-off time. Allow a flash-off time of >30 minutes before sealing.
PVC also needs to be cleaned and pre-treated. Allow a flash-off time of > 30 minutes before sealing,

Porous substrates
Concrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours).

 

LIMITATIONS

SikaHyflex 250 Facade can be overpainted with most facade paint systems. However, paints should be tested to ensure compatibility before use. The best over-painting results are achieved when the sealant is allowed to fully cure. Note: non-flexible paints may reduce the elasticity of the sealant and lead to cracking of paint.

▪ Colour variations may appear when exposed to chemicals, high temperatures and UV-radiation (especially with the colour white).
▪ Before using SikaHyflex 25 Facade on natural stone, refer to Sika Technical Service for advice.
▪ Do not use SikaHyflex 250 on bituminous substrates, natural rubbers, EPDM rubber or any building materials that may bleed oils, plasticizers or solvents that could harm the sealant.
▪ Do not use SikaHyflex 250 to seal joints in or around swimming pools, underwater joints, or for permanent water immersion.
▪ Do not expose uncured SikaHyflex 250 to products containing alcohol as this may interfere with the curing reaction.

 

1 review for Sika Hyflex 250 Facade – 600ml – Box of 20

  1. Jordan G. (verified owner)

    Phoned up Helped me with what i was looking for will be using again deffo recommend

Add a review

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £10.21 inc. VAT
£8.51 ex. VAT
From: £10.21 inc. VAT
£8.51 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £20.71 inc. VAT
£17.26 ex. VAT
From: £20.71 inc. VAT
£17.26 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT