Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles.
Reduces water penetration, staining and dirt/grime build-up
UV stable formulation
Helps inhibit organic growth
Solvent-free formulation – low odour
Facilitates easier cleaning
Improves water resistance and UV resistance
Contains fungicide, which retards mould growth.
For more in our range of sealants, please click here. For our range of concrete products, click here.
To find out more about Bond It and their range of products, you can visit their website here.
Colour Enhancer is designed to enhance coloured concrete and block paving, protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface.
Colour Enhancer is ready to use straight from the tub. Stir well before use and periodically during application. A test on a small area is recommended to determine the necessary depth of colour. Apply using a brush or roller. Do not over apply or allow puddling to occur. Drying will happen within 1 to 2 hours on a dry, sunny day; however, cold or humid conditions will slow this down. Leave the area free from traffic for 3-4 hours after application. Wash hands and tools properly with soapy water after use. A single coat application is recommended, but two coats can be used upon the first application. Adverse reactions can be caused if the Colour Enhancer is used over other existing sealers or treatments, so it should be avoided at all times. Avoid over-application in all circumstances.
Each 4 litre container covers approx. 15m2
LIMITATIONS PLEASE BATCH MATCH TO ENSURE CONSISTENT COLOUR.
Always check that the batch numbers are the same to avoid a difference in colour. Do not apply to damp surfaces or in conditions subject to high humidity. Before application, surfaces should be allowed to dry completely for 48 hours. Do not use if rain is imminent. Do not apply to non-porous surfaces. Keep children and animals away until the product has fully cured. Do not allow any runoff to contaminate drains, waterways or plants.
Initially used SSL via eBay - service was excellent.Contacted them directly for my second purchase, staff were very... knowledgable and couldn't help enough.The items were sent out the same day and at the best price.5 star service all the way!read more
We have purchased our Mapei Grout and Mapei AC silicone from Sealant Supplies for the past 5 months, they have been... quick to dispatch and always seem to have the colours we require in stock. Will keep using them.read more