Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Plasterboard

  • EB25-Everbuild

    EB25 Ultimate Sealant & Construction Adhesive – Box of 12

    £143.76

    EB25 has been launched in 2019 to celebrate their 25 years of Everbuild.

    EB25 is the Ultimate Sealant and Adhesive, covering the broadest range of application, sealant and adhesive areas. It is a polymer blend sealant giving it additional flexibility and bonding strength you can rely on in any situation. The makeup of this product allows the sealant to be used both internally and externally, in most weather conditions and can be used underwater. Everbuild have had EB25 certified for use in sanitary and food preparation areas and once cured is resistant to mould, temperature extremes, chemicals and more

    Colours – Black, White and Grey. Also, Crystal Clear that remains crystal clear and does no fog like similar products.

    Substrates that EB25 bonds to:

    • Metal
    • Wood
    • Brick
    • Concrete
    • Stone
    • Ceramic
    • Tile
    • Plastic
    • Glass

    PRODUCT DESCRIPTION

    Everbuild brings you their best ever sealant and adhesive – EB25, to celebrate their 25th anniversary. Using the most cutting-edge technology and an exclusive polymer blend, our R&D team has developed a truly universal, top quality hybrid. Therefore, it is incredibly flexible, certified for indoor and outdoor use, and in sanitary and food preparation areas (ISEGA). Plus, it’s powerful, sticks to just about anything and even works when applied underwater! Once cured, it’s resistant to mould, temperature extremes, chemicals, petrol, UV radiation, plus it does all this while being environmentally friendly.

    USES

    Bonding & sealing in almost every application imaginable. The following are just some examples: As a high-quality nail replacement adhesive, even to damp surfaces.

    – External and internal pointing around doors and windows.
    – Bonding mirrors to most common substrates.
    – Sealing vertical expansion joints.
    – Jointing cladding panels.

    SUBSTRATE PREPARATION

    All surfaces must be clean and dust-free. Surfaces may be damp but have no standing water. Therefore, it can be used underwater, but adhesion performance is reduced so should be applied as an emergency repair in these conditions only.


    For all other Everbuild products on our website, please click here. For general sealing, please see our DIY section and select the area you require.

    For any further information you require on Everbuild products, please visit their website here.

    This product is Everbuild’s equivalent of the CT1 range and can be used like for like.


     

  • everbuild-AC50

    Everbuild AC50 Acoustic Sealant/Adhesive

    £3.64£4.05

    Everbuild AC50 is a permanently flexible, high strength acoustic sealant and adhesive specially formulated for sealing and bonding plasterboard and other kraft lined insulation boards to conventional substrates.

    USES

    – Sealing gaps between plasterboard walls, floors and ceilings and in dry lining applications.
    – As an adhesive to bond plasterboard to plasterboard, wood and metal studding and direct to blockwork.
    – Bonding most Kraft lined insulation boards.

    CHARACTERISTICS / ADVANTAGES

    – Everbuild AC50 is permanently flexible/high grab.
    – Adheres to most surfaces.
    – Mould resistant.
    – Non-flammable
    – Overpaintable.
    – Easy cleanup.

    SUBSTRATE PREPARATION

    All surfaces must be clean and dust free. Highly porous substrates should be primed first with Everbuild PVA bond diluted 1:4 with water. Surfaces may be slightly damp, but not wet. NOTE: THIS WILL SLOW THE CURE.

    APPLICATION METHOD / TOOLS

    900ml size cartridge needs to be used with a 1ltr mastic gun. Cut nozzle to required length with a sharp blade and puncture inner membrane seal before applying.
    C4 Packs can be installed with a standard sealant gun – Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45°. Use as a sealant: Always cut nozzle to size slightly larger than the gap to be sealed. Apply to the gap, slightly overfilling and finish smooth with a caulking tool or filler knife. Clean excess sealant with a damp cloth within 30 minutes of application.

    Use as an adhesive for direct bonding to large surfaces: Cut nozzle to provide a bead of approximately 9-10mm diameter and apply a continuous bead to one surface at 250-350mm centres. Apply board immediately to surface and tamp down. Provide temporary support until cured. Use as an adhesive for bonding to studding: Apply a continuous bead to studding and apply board immediately into position. Do not apply more than one board’s width of studding at one time. Provide temporary support until cured.

    LIMITATIONS

    – Should not be used against bituminous materials.
    – Humid or damp conditions will significantly extend the cure time.
    – Do not attempt to abrade when cured.
    – Can not be overpainted until the product has fully cured. This will typically be 24 hours but maybe 4-5 days in damp, cold or humid conditions.
    – Do not apply below 5°C.

    Always use mechanical fixings for overhead boarding applications

    For further information, please visit the Everbuild website here.

  • everbuild-AC95

    Everbuild AC95 Intumescent Acoustic 900ml

    £5.99 £3.75

    Everbuild AC95 is specially formulated for bonding & sealing plasterboard, and other Kraft lined insulation boards, where a fire rated seal of up to 5 hours is required. Everbuild AC95 is a water-based & solvent free formulation. It is easy to use and clean up and adheres to just about all building substrates.

    USES

    – For filling gaps between plasterboard walls to form an acoustic & intumescent barrier. Can be used on floors, ceilings and dry lining applications.
    – Can be used as an adhesive to bond plasterboard to plasterboard and bond plasterboard to wood and metal studding and direct to block work.
    – For sealing and bonding, almost all kraft lined insulation boards.

    CHARACTERISTICS / ADVANTAGES

    – Can provide a fire barrier for up to 5 hours – 25% higher than conventional/competitive fire rated sealants.
    – Permanently flexible/high grab.
    – Adheres to most surfaces.
    – Mould resistant.
    – Non-flammable.
    – Easy cleanup.

    APPLICATION INSTRUCTIONS

    SUBSTRATE PREPARATION

    All surfaces must be clean and dust free. Highly porous substrates such as new plaster should first be primed with Everbuild 501 PVA Bond diluted 1:4 with water. Surfaces may be slightly damp, but not wet. NOTE: THIS WILL SLOW THE CURE.

    APPLICATION METHOD / TOOLS

    Fit cartridge into a 1ltr mastic gun. Cut nozzle to required length with a sharp blade and puncture inner membrane seal before applying. Use as a sealant: Always cut nozzle to size slightly larger than the gap to be sealed. Apply to the gap, slightly overfilling, and finish smooth with a caulking tool or filler knife.

    Use as an adhesive for bonding to large substrates: Cut nozzle to provide a bead of approximately 9-10mm diameter, pierce the inner membrane and apply a continuous bead to one surface at 250-350mm centres. Apply board immediately to surface and tamp down. Provide temporary support until cured.

    Apply a bead to studding and apply board immediately into position. Do not apply more than one board’s width of studding at one time. Provide temporary support until cured.

    LIMITATIONS

    – Do not attempt to abrade when cured.
    – If you wish to paint after application, do not do so until it has fully cured. Normally after 24 hours
    – Do not apply below 5°C.
    – Always use in conjunction with mechanical fixings if the product is being used in overhead applications
    – Known to have compatibility problems with some cPVC piping

    For more Everbuild products on our website, please click here.

    For any further information, please visit the Everbuild website here.

  • everbuild-easy-squeeze

    Everbuild Easi Squeeze Instant Nails

    £5.99 £2.49

    Everbuild Easi Squeeze Instant Nails is ideal for sticking a majority of building products, for instance, wood, metal, PVC, most plastics, glass & aluminium. It can also be used for concrete, render, stone, paper, cork, ceramic, plasterboard, Rockwool, PU-foam board & breezeblocks.

    In addition to the above, Everbuild instant nails can be used to achieve several tasks, including – Bonding dado rails, architrave’s and skirting, Fixing wall cladding direct to internal wall surfaces or timber battens, therefore being able to fix battens directly onto walls without fastenings. Similarly, for bonding carpet gripper systems to most floors without the need for nails or tacks.

     

    Breakdown:

    High strength solvent free gap filling adhesive

    One surface must be porous

    Provides a quick grab

    Has rapid drying properties for a solvent-free adhesive

    Achieves over 50% of its ultimate bond strength in one hour.

    Everbuild Easi Squeeze instant nails will dry white and is over paintable when dry.

     

    Instant Nail Benefits:

    Solvent-free environmentally friendly formulation

    Excellent adhesion & bond strength

    Quickly adheres to most common surfaces

    Good early grab properties

    Usable in both vertical & horizontal positions.

    Dries white

    Will adhere to damp surfaces.

    Water clean-up

    Over paintable.

     

    Product Limitations:

    At least one surface must be porous.

    Protect from rain until cured when used externally,

    Curing time may be significantly extended In damp cold or humid conditions,

    Do not use in permanently damp wet conditions.

    Do not use in situations where both surfaces are non -porous

    For all other adhesives on our website, please click here.

    For any further information on Everbuild’s products, please visit their website here.

  • Everbuild Instant Nails

    £2.95 £1.20

    Everbuild Instant Nails is ideal for sticking a majority of building products, for instance, wood, metal, PVC, most plastics, glass & aluminium. It can also be used for concrete, render, stone, paper, cork, ceramic, plasterboard, Rockwool, pufoam board & breezeblocks.

    In addition to the above, Everbuild instant nails can be used to achieve a number of tasks, including – Bonding dado rails, architrave’s and skirting, Fixing wall cladding direct to internal wall surfaces or timber battens, therefore being able to fix battens directly onto walls without fastenings. Similarly for bonding carpet gripper systems to most floors without the need for nails or tacks. Bonding stair nosing to concrete or wooden stairs. Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

    Breakdown:

    High strength solvent free gap filling adhesive

    One surface must be porous

    Provides a quick grab

    Replaces mechanical fixings in a multitude of Home Improvement applications, both internally and externally.

    Has exceptionally quick drying properties for a solvent-free adhesive

    Achieves over 50% of its ultimate bond strength in one hour.

    INSTANT NAILS dries white and is over paintable when dry.

     

    Instant Nail Benefits:

    Solvent-free environmentally friendly formulation

    Excellent adhesion & bond strength

    Quickly adheres to most common surfaces

    Good early grab properties

    Usable in both vertical & horizontal positions.

    Dries white

    Will adhere to damp surfaces.

    Water clean-up

    Over paintable.

     

    Product Limitations:

    At least one surface must be porous.

    Protect from rain until cured when used externally,

    Curing time may be significantly extended In damp cold or humid conditions,

    Do not use in permanently damp wet conditions.

    Do not use in situations where both surfaces are non -porous

  • everbuild-stixall

    Everbuild Stixall

    £3.52£4.25

    Everbuild Stixall is a solvent-free hybrid of silicone and polyurethane technologies combined to create a high strength sealant adhesive. Stixall was designed for adhering most common building surfaces to each other.

    USES

    Stixall can be used for sealing and bonding in a wide range of areas; the following are just some examples:

    – As a grab adhesive for things like nail replacement, even on damp surfaces.
    – For pointing around perimeters such as doors and windows.
    – Adhering mirrors to most common surfaces.
    – Automotive gap filling and sealing, especially in mobile structures.
    – Marine gap filling and sealing, ideal for boats.
    – Jointing cladding panels.
    – Stixall can be used for durable sealing and bonding of joints.
    – As a standard sealant.

    CHARACTERISTICS / ADVANTAGES

    – Initial grab of high strength, no slip & gap filling properties.
    – High bonding strength.
    – For internal or external use.
    – Can be applied to wet surfaces.
    – Waterproof & weatherproof.
    – Quick curing.
    – Can be painted if required (with water-based paints – test an inconspicuous area before use).
    – Solvent-free.
    – Resistant to temperature extremes -40°C to +100°C.
    – Resistant to chemicals & petrol (10% dilute acids/alkali, most solvents).
    – Excellent resistance to UV radiation.

    Furthermore, Everbuild Stixall has a maximum shrinkage of < 2%.

    Also, Everbuild Stixall has excellent, primer-less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.

    This product can be used as an alternative to CT1.