Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Bond It

  • Bond It Professional 4 Part Sealant Applicator Tool Kit

    £4.50

    The Bond It Professional 4 Part Sealant Applicator Tool Kit is a handy kit for the smoothing and finishing of mastic sealants, both internally and externally, in hard to reach areas, such as behind bath taps and corner areas.

    The Bond It Professional 4 Part tool kit is used to create recessed joints, perfectly flush joints and tidy fillet sealant joints with any type of mastic sealant.

    It is supplied in a neat plastic case with instruction leaflet. The kit contains 4 tools which cover 15 profiles: any edge, any corner, any joint – from 0 to 28mm.

    They work well with all kinds of sealant and provide you with a perfectly finished waterproof seal every time.

     

    For all other tools on our website, please click here. For a complete bathroom kit, please click here.

    For any further information you may need on Bond It, please visit their website here.

  • Bond-It 1 Part Wood Filler 250ml – Box of 6

    £11.61£12.60

    An easy to use, ready mixed, high quality, solvent‐free filler, ideal for filling small imperfections (max 5mm depth) and covering the recesses left by nails and screws in wood.

    BENEFITS

    – Can be stained, painted, varnished or dyed once cured.
    – Solvent‐free, low odour and non‐flammable.
    – Waterproof.
    – Suitable for internal and external applications.

    USES

    General wood filling of windowsills, frames, bannisters, MDF and laminates, etc. Repairing wood damaged by wet rot in both internal and external locations. Repair damage and chips to parquet or laminate flooring, wooden furniture, etc.

    PREPARATION

    Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion. Wet down the surfaces that the material is to be applied to. NOTE: If you intend to overstain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use. Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood. As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.

    APPLICATION

    Stir well before use. Apply with a wetted filling knife or spreader, forcing into cracks and holes. For deep holes, build up in layers allowing each layer to dry. Leave slightly proud, and when completely dry, sand down. Drying time – touch dry in 30 minutes. When overpainting, staining or varnishing, you may get a colour difference with the surrounding wood, so always check on a small area first. Do not add stain to Bond It ALL PURPOSE WOOD FILLER. Not suitable for filling gaps between floorboards.

    LIMITATIONS

    As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first. Note: filler may dry darker. Do not exceed 5mm in one coat. For holes deeper than 5mm or for areas subject to impact, such as doors and window frames, use Bond It 2 PART WOOD FILLER. Protect from rain when used externally for at least 5 hours. Do not apply below 5o C.

     

    For our full range of filler for wood, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It 2 Part Wood Filler 275ml – Box of 6

    £40.77

    Bond-It 2 Part Wood Filler is a tough, durable, two part wood filler based on polyester resin. Long lasting repair for all wood types

    BENEFITS

    – Can be stained, painted, varnished or dyed once cured.
    – Chemical curing system ‐ sets hard in 30 minutes to any depth.
    – Sandable in 30 minutes.
    – High strength; can be drilled, nailed, planed and carved once dry.
    – Good movement capabilities to flex with wood. No shrinking or cracking. w Waterproof, suitable for internal and external application.

    USES

    2 Part Wood Filler is a general wood filling of windowsills, frames, banisters, MDF and laminates, etc. Repairing wood damaged by wet rot in both internal and external locations. Repair damage and chips to parquet or laminate flooring, wooden furniture, etc.

    PREPARATION

    Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion. Any rotten wood should be totally removed. If you intend to overstain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use. Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood.

    APPLICATION

    Mix a golf ball volume of filler (approx. 38mm diameter and a 38mm strip of hardener into a homogeneous paste with the spatula provided. Press firmly into the surface to be repaired, leaving it slightly proud. Leave to dry for about 30 minutes until hard before finishing (sanding and or painting/staining).

    LIMITATIONS

    Do not attempt to push mixture back into pack once mixed. Avoid contact with eyes and skin. Always test a small inconspicuous area for colour matching purposes. Throw away any unused mixed material after 10 minutes.

     

    For our full range of filler for wood, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It Bath-Mate Bath & Kitchen Sealant 310ml – Box of 25

    £36.00

    Bond-It Bath-Mate is a high quality, permanently flexible, water-based sealant with excellent adhesion to plastic, ceramic tiles, wood and porcelain. It can be overpainted and is easy to use. Can also be used as a grout repair.

    Uses

    Bond-It Bath-Mate BATH & KITCHEN SEALANT can be used to seal around ceramic baths, sinks and worktops, forming a watertight bond to the surfaces. Contains a powerful anti-fungal compound to prevent mould growth. Easy to apply and any mistakes can be easily rectified with water.

    Preparation

    All surfaces must be clean, dry, sound and free from dust, oil or any other contaminants that may hinder adhesion.

    Priming

    Bond It BATH & KITCHEN SEALANT does not require a primer on most common construction surfaces. To determine whether a primer is necessary, a sample should be tested. Contact Bond It Technical Service Department for recommendations.

    Application

    Apply using a standard sealant gun. Cut tip from the cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° to an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Smooth down within 15 minutes using a slightly wetted spatula. Remove excess product with a damp cloth. Do not saturate the surface with water, as this will delay curing the process.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Not suitable when:
    – Applied externally during rainy weather.
    – Applied at temperatures below +5°C.
    – Not suitable for plastic baths – use a sealant with greater flexibility.
    – Do not use in joints immersed continuously in water.
    – Can not be used in contact with bituminous products.
    – Used in areas of high abrasion, e.g. floor joints.
    – This product is not a silicone sealant!

    For application guns for this product, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It De-Bond Mate Silicone Sealant Remover – Box of 12

    £41.22

    Bond-It De-Bond Mate Silicone Sealant Remover – Box of 12

    Bond-It De-Bond Mate is a non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.

    Ideal for use in a trade environment where errors have been made when applying silicone sealants, which can be easily done. Bond-It provide high quality products available at cost-effective prices, box of 12 means bulk orders are simple and can also be available with discounts for our trade and credit account holders.

    Uses

    Bond-It De-Bond Mate Silicone Sealant Remover can be used to remove old silicone sealant during renovations. It is suitable for use on concrete brick, glass, metals, PVCu and acrylic-based products.

    Application

    Cutaway excess sealant with a knife or sharp blade. Protect any surrounding paintwork with masking tape. Wipe clean with paper tissue or a dry cloth and ensure all traces of solvent are removed.
    Keep some water handy to deactivate any runs. After that, surfaces should be cleaned with a solvent, such as methylated spirit, before applying fresh sealant.

    Limitations

    If in doubt, try a small area first. Furthermore, if the gel comes into contact with water, the active ingredients will be deactivated, and the gel rendered unusable.

    Storage Conditions

    Store in original, unopened containers, out of direct sunlight. Store between 50 C and 25o C.

    For all other Bond-it products on our website, please click here.

    For any further information, you may need on Bond-it, please visit their website here.

  • Bond-It Duo 2 in 1 Wood Glue

    £17.64£394.08

    Uses DUO “2 IN 1” WOOD GLUE can be used as a general-purpose joinery adhesive or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Suitable for hard and softwoods, decorative laminates, chipboard blockwood and other engineered timber panels. It is also suitable for use with RF bonding machinery. Not suitable for permanent immersion in water.

    PREPARATION

    Surfaces to be bonded must be clean, dry and free from dust, grease or contaminants that may hinder adhesion.

    APPLICATION

    Apply the adhesive to one surface only and bring the two surfaces together within 3-4 minutes and clamp for approximately 1 hour. After 1 hour, careful handling is permissible. Glued components should be left overnight before machining. Remove excess adhesive whilst wet using a damp cloth. When using RF bonding techniques, the user must explore the most efficient combination of glue application, power and dwell time as each of these varies with different machinery and constructions.

    LIMITATIONS

    Do not use on surfaces below 5oC except with RF heating or timber with a moisture content of above 12% Timber which in use will be permanently wet and stressed should be glued with a thermosetting adhesive.

     

    For our full range of filler for wood, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-it Flash Mate Lead Silicone – Box of 25

    £60.38

    Bond-It Flash Mate Lead Silcone – Box of 25

    Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant. It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.

    A cost-effective option of specialist trades people who require a reliable sealant which they can use across multiple projects and environments.

    Uses

    Bond-it Flash Mate can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing roof lights, conservatories, soffit boards, glasshouses, industrial roofing systems, lead flashing and to prevent tile lifting and wind noise.

    It is ideal for use on:
    – Glass
    – Slate
    – All metals including lead and galvanised steel
    – Concrete and brick
    – GRP
    – Sealed timber
    – Plastics (including poly-carbonate)
    – Acrylics
    – PVCu
    – All painted surfaces

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle using a sharp blade, to an opening slightly larger than the joint you wish to seal. Allow a minute or two before tooling for the best results. For bonding, press the two surfaces together before skinning commences. On very hot roofs skinning time will be much shorter. Once the silicone has been applied and tooled, the rain will not have any adverse effects on the sealant.

    For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It GP200 Contractors Grade Silicone – Box of 25

    £49.88

    Bond-It GP200 is a multi-purpose, low modulus silicone rubber sealant with fungicide, suitable for most sealing jobs around the home.

    Uses

    Bond It GP 200 is ideal for sealing in areas of high humidity. Therefore it has excellent adhesion to glass, glazed surfaces, ceramic tiles, many plastics and most paints.

    It is suitable for the following applications – kitchen worktops, bathrooms, showers, utility rooms and general DIY applications.
    – Car
    – Boat
    – Caravan
    – House

    Preparation

    Ensure all surfaces are clean and free from grease. All types of cement, concretes and bare metal surfaces should be primed before the application of the silicone. Timber should be primed and painted.

    Application

    Apply using a sealant gun with the nozzle cut at a 45° angle, and to an opening slightly larger than the joint to be sealed. Smooth using a stick or plastic spatula wetted with a soap & water solution. Can not be applied to wet surfaces, although wetting immediately afterwards will not have any adverse effects. After that, tools can be cleaned in white spirit prior to curing taking place.

    Limitations

    Bond-It GP200  is not suitable for fixing of mirrors or sealing natural marble.

    For all other Bond-it products on our website, please click here. For all other sealants, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It Gripbond Pro Crystal Clear Hybrid Sealant & Adhesive 310ml – Box of 12

    £57.42

    A one part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology. A totally neutral “hybrid” sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength.

    Bond It GRIPBOND PRO can be used:

    – For filling and sealing of connecting joints, cracks, holes, etc., in the building sector.

    – For bonding metal to metal (can absorb vibration).

    – As a universal waterproof construction adhesive for bonding concrete, mirrors (note: not suitable for plastic-backed/safety mirrors), gypsum board, polycarbonates, polystyrene, PVC, many plastics, ceramics, copper, lead, zinc, aluminium, stainless steel, wood and glass.

    We recommend that test areas be carried out prior to application to ensure compatibility of materials.

    Preparation

    Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion.

    Application

    Carefully cut the top of the cartridge, taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45o . Apply using a standard sealant gun. As an adhesive, apply in beads or strips, bond the surfaces together carefully, and cure. As a sealant: apply in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution. Remove any excess material and clean tools immediately with white spirit. Replace plastic cap after use.

    Limitations

    Please note this product is not recommended for expansion joints or for installations where the joints are continually immersed in water. Note: if allowed to cure in dark conditions or poor light, the product may yellow. This product is not for use in aquariums.

    Note: not suitable for use on LSE plastics such as PE, PP and PTFE. This product may cause staining on marble and other stone surfaces. This can be avoided by using a sealer prior to application of GRIPBOND PRO.

    Do not use for bedding in double glazed units. For this application, we would recommend our LN7 silicone. Do not use on surfaces that bleed oils or plasticisers. Paintability: as quality and type of paint can vary, always test compatibility before use, but we only recommend use of water based paints with this product. Any mirror made with 6mm glass or thicker needs mechanical fixing. Any mirror on a sloping wall or ceiling must have mechanical fixings.

    Any mirror greater than 1m2 must have mechanical fixings.

    For application guns for this product, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It Gripbond Pro Hybrid Sealant & Adhesive 310ml – Box of 12

    £38.34

    A one part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology. A totally neutral “hybrid” sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength.

    Bond It GRIPBOND PRO can be used:

    – For filling and sealing of connecting joints, cracks, holes, etc., in the building sector.

    – For bonding metal to metal (can absorb vibration).

    – As a universal waterproof construction adhesive for bonding concrete, mirrors (note: not suitable for plastic-backed/safety mirrors), gypsum board, polycarbonates, polystyrene, PVC, many plastics, ceramics, copper, lead, zinc, aluminium, stainless steel, wood and glass.

    We recommend that test areas be carried out prior to application to ensure compatibility of materials.

    Preparation

    Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion.

    Application

    Carefully cut the top of the cartridge, taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45o . Apply using a standard sealant gun. As an adhesive, apply in beads or strips, bond the surfaces together carefully, and cure. As a sealant: apply in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution. Remove any excess material and clean tools immediately with white spirit. Replace plastic cap after use.

    Limitations

    Please note this product is not recommended for expansion joints or for installations where the joints are continually immersed in water. Note: if allowed to cure in dark conditions or poor light, the product may yellow. This product is not for use in aquariums.

    Note: not suitable for use on LSE plastics such as PE, PP and PTFE. This product may cause staining on marble and other stone surfaces. This can be avoided by using a sealer prior to application of GRIPBOND PRO.

    Do not use for bedding in double glazed units. For this application, we would recommend our LN7 silicone. Do not use on surfaces that bleed oils or plasticisers. Paintability: as quality and type of paint can vary, always test compatibility before use, but we only recommend use of water based paints with this product. Any mirror made with 6mm glass or thicker needs mechanical fixing. Any mirror on a sloping wall or ceiling must have mechanical fixings.

    Any mirror greater than 1m2 must have mechanical fixings.

    For application guns for this product, please click here. For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • Bond-It HA6 RVT Marine Silicone – Box of 25

    £82.88£83.25

    Bond-It HA6 RVT Marine Silicone is marine quality, automotive silicone sealant. It is unaffected by saltwater immersion and extreme temperature. This product is non-slumping in paste form.

    Uses

    It is ideal for use on:
    – Glass
    – Ceramics
    – Anodised aluminium
    – Primed metals and timber
    – Many plastics

    Preparation

    Ensure all surfaces are dry and free from grease, oil or any other contaminants that may hinder adhesion.

    Application

    Apply Bond-It HA6 using a standard sealant gun. Cut the nozzle at a 45° angle with a sharp blade, making sure not to damage the thread. The nozzle should be cut to an opening slightly larger than the joint to be sealed. For sealing and bedding apply in the usual fashion and tool to a smooth finish one or two minutes after gunning. As an adhesive, bring the two surfaces together before skinning commences and do not stress the joint before the silicone has developed strength. Clean away any excess with white spirit.
    When using in aquarium assembly, please refer to separate sheet for instructions which can be downloaded from our website.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

    For alternative products please see below, options like CT1 are available.

  • Bond-It Lami-Mate Timber Sealant – Box of 12

    £29.34

    Bond-It Lami-Mate Timber Sealant is a polymer enhanced, flexible sealant and gap-filler designed for sealing all tongue and groove laminate flooring. When cured it can be varnished or wood stained if required.

    Uses

    Bond-It Lami-Mate stays permanently flexible and can be used for sealing all types of laminate and hardwood flooring. It can also be used for sealing around timber window and door frames as well as all types of fitted furniture. For example, bedroom and kitchen fittings, laminate worktops etc. LAMI-MATE is also suitable for sealing glass panels into kitchen unit doors. In addition, it is suitable for internal and external use.

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle with a sharp blade, making sure not to damage the thread.  The nozzle should be cut to an opening slightly larger than the joint tha is to be sealed. Smooth down using a slightly wetted spatula, dampened with a soap & water solution.

    We have a number of tools on our website that would assist with the application of this product. We would recommend using a PC Cox Skeleton Gun to apply & a Bond-it Tooling Kit to aid in providing a professional finish.

    Limitations

    Do not use in conjunction with bitumen or asphalt. For perimeter use only, do not use in areas subject to mechanical abrasion. Furthermore, do not attempt to sand down.
    Caution: The colour on application will be different from the colour achieved when fully cured.

    Container Size

    EU3 plastic cartridge.

    Colours

    LAMI-MATE comes in 4 colours: teak, pine, dark oak and light oak.

    For all other Bond-it products on our website, please click here.

    For similar wood sealants, click here.

    For any further information you may need on Bond-it, please visit their website here.

Bond It

Bond It provide a variety of sealant products to the market, ideal for professional applicators and trades people. We stock a huge variety of Bond It products, all of which are highly sought-after within the sealant market.

Providing a range of sealant options, Bond It have products for a range of requirements including marine silicone, timber sealants, lead silicone and applicator tool kits. As a versatile range of products this brand have something to suit every trades person.

Alongside their sealant range, they also provide a sealant remover which is ideal for preparation of a surface before application.

Bond It is utilised by tradespeople throughout the UK with a requirement for a high quality and reliable sealant. These sealant products are also ideal for work across a range of projects and can be utilised in a variety of situations.

The pricing of Bond It sealants are also extremely competitive within the market, therefore there are highly sought after by our customers.

As with all our products we stock Bond It sealants in bulk sizes, making them ideal for discounts and large orders from our trade account holders. If you would like to speak to a member of our team about creating a trade or credit account, do not hesitate to get int touch for more information. Simply call 01708 525 866.