Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
– Excellent mechanical and chemical resistance, therefore excellent durability.
– A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
– Easy workability and finishing.
– Becomes ve
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
- Excellent mechanical and chemical resistance, therefore excellent durability.
- A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
- Easy workability and finishing.
- Becomes very hard an
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm.
TECHNICAL CHARACTERISTICS
Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned.
The following features are obta
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor Flex is an improved, cementitious grout with water repellent properties and high abrasion resistance.
Keracolor Flex is a blend of specially selected hydraulic binders with fine graded aggregates, polymers, additives and colourants. High-quality hydrophobic additives enhance the grout’s technical performance imparting water repellent properties to the surface. This reduces dirt pickup and increases the grout’s durability and longevity.
When mixed and applied correctly to the joints, the following properties are obtained:
• water repellent surfaces;
• joint w
Select options
This product has multiple variants. The options may be chosen on the product page
Mapei Waterproof Fix & Grout is a white, mould resistant, ready mixed adhesive and grout specifically for walls. For use in wet and dry areas. Suitable for both ceramic tiles and porcelain.
CHARACTERISTICS
Waterproof Fix & Grout is an aqueous dispersion based adhesive containing mould resistant BioBlock Technology. It is a viscous paste that can be trowelled easily on vertical surfaces. Once positioned, the tiles remain in place due to its excellent grab and slip resistant properties. It sets as the water it contains evaporates, forming an extremely strong bond
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX-FLEX FL is a rapid-setting, flexible, and water-repellent cement-based grouting compound, suitable for use without the need for a separate admix. It is available in 2.5kg, 5kg, and 10kg sizes with various color options, and classified as CG2 WA under BS EN standards, indicating improved cementitious grout with reduced water absorption and high abrasion resistance. ARDEX-FLEX FL is ideal for grouting joints from 3mm to 15mm wide between porcelain, ceramic, non-moisture-sensitive natural stone, quarry tiles, extruded tiles, and glass blockwork, and can be used indoors and
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX AM 100 is a rapid-setting, grey sand and cement render designed to facilitate quick project turnaround. This preblended product requires only the addition of water to achieve a slump-free mortar that can be applied in a thickness range of 2-30mm in a single coat. The primary advantage of ARDEX AM 100 lies in its ability to accommodate both very thin and substantial layers, making it an ideal choice for applications where conventional sand and cement renders would be impractical due to drying time constraints or required thickness. Its versatility extends to a range of s
ARDEX X 7001/ARDEX X 7001W is a grey or white, MICROTEC fibre-reinforced, rapid hardening and drying flexible cement-based floor tile adhesive. It is designed for use on wood-based sheets, boards, and other surfaces, making it ideal for internal applications such as fixing floor tiles and tile backer boards. The built-in fibres help minimize the risk of cracking over board joints in the event of timber movement, while its pourable consistency enables solid bedding of tiles without back-buttering. Classified under BS EN 12004 C2 FE as an "improved cementitious adhesive with ex
ARDEX X 325 PTB and ARDEX X 325 PTB W are rapid-setting, cement-based thick-bed pourable floor tile adhesives designed for applications ranging from 3mm to 25mm in depth. These adhesives allow for tiles to be walked on and grouted within just 3 hours. Classified as C2 F by BS EN 12004, they are recognized as improved, fast-setting cementitious adhesives with excellent performance characteristics. These offer strong adhesion with a tensile strength of over 1 N/mm², even after water immersion, heat aging, or freeze-thaw cycling. While these adhesives are ideal for large format tiles a
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX EG 18 PLUS offers the advantages of both epoxy and cement-based grouts, combining high performance with ease of application. This grout is known for its exceptional chemical and abrasion resistance, creating joints that are both hygienic and low-maintenance. Here are four key points:
Durability and Resistance: ARDEX EG 18 PLUS excels in environments that demand high durability. It is highly resistant to chemicals, including aqueous salt solutions, chlorine, commercial cleaning agents, alkalis, and various dilute mineral acids. Full chemical resistance is achieved
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX FLEX FS is a versatile, cement-based grouting compound known for its flexibility and water-repellent qualities, eliminating the need for a separate admix. It comes in a variety of sizes and colors, including Brilliant White, Dove Grey, and Black, among others. The grouting compound is available in 2.5kg, 5kg, and 10kg sizes in several colors, and in 2.5kg and 10kg sizes for additional colors such as Organic Earth and Wild Mushroom.
Classification and Performance: ARDEX FLEX FS is classified as CG2 WA according to BS EN 13888. This means it is an improved
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 7 G and ARDEX X 7 W are highly versatile, multipurpose tile adhesives designed for a wide range of applications. These adhesives are suitable for fixing ceramic, porcelain, glass mosaics, and most non-moisture-sensitive natural stone floor and wall tiles. Their frost and weather-resistant properties make them ideal for both internal and external use, including wet areas, swimming pools, and areas exposed to harsh weather conditions. The mixed mortar offers a slump-free consistency with high initial grab, allowing for the secure installation of heavy wall tiles without the nee
Select options
This product has multiple variants. The options may be chosen on the product page
£27.64 - £28.48 ex. VATKerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: – Excellent mechanical and chemical resistance, therefore excellent durability. – A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. – Easy workability and finishing. – Becomes veSelect options This product has multiple variants. The options may be chosen on the product page
