Bond It All Weather Gap Joint Fill is a single component joint filling system for easy and rapid pointing of paved areas. Ready-to-use on joints over 5mm and comprised of a unique blend of polymers and aggregates that chemically bind together. On exposure to the atmosphere, it forms a stable, solid mass which once cured, is unaffected by the weather. It remains permeable and allows rainwater to pass into the watercourse, reducing puddling. It eliminates the need for sand/cement pointing!
For more sealants, please click here. For other products in our grout rang
Select options
This product has multiple variants. The options may be chosen on the product page
Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application.
Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.
Features & Benefits:
- Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather
- Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving
- GEO‐FIX All Weather is unaffected by w
Select options
This product has multiple variants. The options may be chosen on the product page
Cromar AlphaChem Mortar Stain Remover is a rapid, concentrated hydrochloric acid‐based formula for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence. Preparation and
For more information on Cromer, please visit their website here.
For other concrete related products, click here. For primers and cleaners, please click here.
Liquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.
To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top.
Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
Cromar Powder Mortar Tone is a permanent powder colourant for pigmenting all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
- Mortar does not stiffen prematurely on the board but remains plastic.
- Mortar does not segregate or ‘bleed’.
- Mortar is less prone to drying out shrinkage.
- Increased adhesive strength.
- Up to 50% water reduction can be affected.
- Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
Select options
This product has multiple variants. The options may be chosen on the product page
Mapetherm Net is an alkali-resistant glass fibre mesh, suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems and Mapewall GPR.
Mapetherm Net is for use on top of render base coats as a reinforcement. The Silancolor Base Coat & Silancolor Tonachino Top Coat can be applied on top.
The mesh is made from glass fibres treated with a special primer which makes it resistant to alkalis and improves its adhesion to all MAPEI renders (where used). Once the reinforcing coat has hardened, the Ne
£23.74 ex. VATBond It All Weather Gap Joint Fill is a single component joint filling system for easy and rapid pointing of paved areas. Ready-to-use on joints over 5mm and comprised of a unique blend of polymers and aggregates that chemically bind together. On exposure to the atmosphere, it forms a stable, solid mass which once cured, is unaffected by the weather. It remains permeable and allows rainwater to pass into the watercourse, reducing puddling. It eliminates the need for sand/cement pointing! For more sealants, please click here. For other products in our grout rangSelect options This product has multiple variants. The options may be chosen on the product page
£32.97 ex. VATBond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather. Features & Benefits: - Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather - Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving - GEO‐FIX All Weather is unaffected by wSelect options This product has multiple variants. The options may be chosen on the product page
£3.67 ex. VATCromar AlphaChem Mortar Stain Remover is a rapid, concentrated hydrochloric acid‐based formula for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence. Preparation and For more information on Cromer, please visit their website here. For other concrete related products, click here. For primers and cleaners, please click here.
£5.52 - £13.65 ex. VATLiquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete. For more information on Cromer, please visit their website here. For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.Select options This product has multiple variants. The options may be chosen on the product page
