ready to use
-
£21.28 ex. VATTopcem Pronto is a pre-blended, ready-to-use mortar formulated with a special hydraulic binder and graded aggregates, designed for normal setting and controlled shrinkage. This product simplifies the mixing process by requiring only the addition of water, which eliminates the risk of errors associated with the proportions of binder and aggregates, thus ensuring optimal performance once cured. Topcem Pronto is particularly beneficial in areas where sourcing quality graded aggregates is challenging, such as urban job sites where traditional mixing logistics can be complicated. It offer -
£26.31 ex. VATEVERBUILD FILL & SKIM is a ready-mixed plaster substitute made with lightweight polymer spheres, designed to provide a smooth, easy-to-apply finish that produces a professional result, even for DIY enthusiasts. It dries to a hard yet flexible finish, making it suitable for use on walls and ceilings, and can fill holes up to 25mm in one application. Once dry, it will not shrink, sag, or crack and is ready to paint or wallpaper within 24 hours, requiring little to no sanding. Key Points: Easy-to-apply patching plaster Simple to smooth over large areas Ready
-
£29.21 ex. VATA coloured wood-preserving fungicide designed to protect outdoor timber from rot, decay, and fungal growth. Its water-based, solvent-free formula provides deep penetration while maintaining the natural wood grain. Quick-drying, low-odour, and UV fade-resistant, it’s ideal for sheds, fences, pergolas, and other outdoor wooden structures. Easy to apply by brush or low-pressure spray for long-lasting protection.Select options This product has multiple variants. The options may be chosen on the product page
-
£4.49 ex. VATCromar AlphaChem Rapid Set Mortar is a high-performance, fast-setting mortar mix made from Ordinary Portland Cement, kiln-dried silica sand, and specially chosen additives for enhanced workability and durability. Designed for small repair jobs, it sets quickly—initially in about 10 minutes and fully within 30—making it ideal for tasks like filling holes in brickwork or pointing repairs. Simply add water, and it’s ready to use. Key points: Quick Setting: Initial setting occurs in around 10 minutes, with a complete set within 30 minutes, allowing for eff
-
£2.93 - £5.74 ex. VATFix 'N' Grout is a brilliant white, ready-mixed adhesive paste that functions as both a thin-bed waterproof ceramic wall tile adhesive and joint-filling grout. Ideal for use in interior locations such as bathrooms, kitchens, and shower areas, it is perfect for fixing all types of ceramic wall tiles, including mosaics, porcelain, and vitrified tiles. This versatile product can be applied to a variety of surfaces, including gypsum plaster, cement fibreboard, existing tiles, cement render, timber panels, and plywood composite boards. It is particularly well-suited for areas exposed to freSelect options This product has multiple variants. The options may be chosen on the product page
-
£3.12 ex. VATEVERBUILD 113 Plumbers Putty is a ready-mixed, waterproof, non-setting putty designed for sealing and bedding W/C soil pipes, joints in sanitary wear, sinks, and wastewater fittings. It effectively seals ceramics, vitreous enamels, metals, and PVC, remaining permanently flexible to accommodate joint movement. The putty is overpaintable and compatible with Everflex Silicone Sealants, making it versatile for various applications. Additionally, its added plasticiser enhances adhesion and prevents cracking. Key Points: Ready-mixed, waterproof, and non-setting. Remain
-
£146.89 ex. VATARDEX MVS 95 is a ready-to-use, one-component, water-based dispersion coating available in pre-gauged 12kg units. This pigmented blue coating indicates uniform coverage and becomes waterproof once fully cured. Designed to suppress residual construction moisture in cementitious substrates, including properly prepared power-floated concrete and cement/sand screeds, ARDEX MVS 95 is intended for use as a two-coat system. When fully dry, it creates a membrane that can accommodate hygrometer readings of up to 95% relative humidity (RH) and allows the subsequent application of ARDEX levelin
-
£3.28 - £6.01 ex. VATRonseal Exterior Multi-Purpose Smooth Filler is ideal for repairing holes and gaps in masonry, concrete, and brick. Designed for outdoor use, it is water and frost resistant, making it suitable even in less-than-perfect weather conditions. This tough and durable filler can be drilled once fully dry and works effectively in damp or moisture-prone environments. It fills gaps up to 20mm deep, dries within one to two hours, and is available in both tubs and tubes for convenient application. Key points: - Fills gaps up to 20mm deep in masonry, concrete, and brick - Water and frost resistant foSelect options This product has multiple variants. The options may be chosen on the product page
-
£18.42 - £33.40 ex. VATDrive Alive Decking Oil is a ready-to-use nourishing oil that restores the natural oils lost through weathering, feeding the wood and providing a protective barrier against water penetration, which can cause swelling and warping. It is suitable for untreated, previously oiled, or weathered decking and offers UV resistance, prevents mould and algae build-up, and waterproofs the surface. The oil leaves a natural-looking finish and is ideal for all types of garden decking. Before application, ensure the decking is dry and avoid applying in wet conditions or if rain is imminent. Always tSelect options This product has multiple variants. The options may be chosen on the product page
-
£13.06 ex. VATSika Release Oil is a high-performance formwork release agent engineered for professional construction applications, this specialized solution provides exceptional concrete removal capabilities with superior surface quality. By offering seamless formwork separation, the agent ensures smooth, uniform concrete surfaces while protecting mold faces from adhesion and potential defects. Its advanced formulation delivers multiple benefits including non-combustible protection, excellent vertical surface adhesion, and minimized residual dust, ultimately enhancing both operational efficiency and
-
£4.00 - £6.80 ex. VATEVERBUILD FILL ONCE is a revolutionary ready-mixed filler using Expanded Micro-Sphere Technology (EMT), designed for filling large or small holes in a single application, eliminating the need for multiple layers. It provides a smooth, fine finish that won’t shrink, requires minimal sanding, and can support nails or screws once fully dried. Ideal for repairs to plaster, wood, brick, stone, and rendering, it is lightweight, easy to apply, and dries quickly, allowing for painting or papering in just 30 minutes. Key Points Fills up to 50mm in one application, with noSelect options This product has multiple variants. The options may be chosen on the product page
-
£33.89 - £88.45 ex. VATARDEX AF 200 PLUS is a ready-mixed adhesive specifically designed for installing fleece-backed uncoupling mats before tiling. It offers excellent grab and an exceptionally long tack time, providing strong early and long-term adhesive bond strength. This allows matting systems to be installed within 5 minutes to 1 hour after application, enabling immediate tiling once the matting is in place. Additionally, ARDEX AF 200 PLUS complies with the EMICODE licence ‘EC1 PLUS’, ensuring the lowest emission limits. It is suitable for fixing fleece-backed uncoupling matting to timberSelect options This product has multiple variants. The options may be chosen on the product page
