Expanding Foam

• 

  Everbuild Firefoam B1 Gun Grade

  £7.42

  Everbuild Firefoam B1 Gun Grade is a fast-setting, fire-rated, polyurethane foam. It expands upon application to yield up to 50 times the can contents and meets the extremely stringent requirements of the relevant test criteria. Everbuild Firefoam B1 is fire-rated up to 4 hours in specific joint configurations. For use with an Everbuild® Professional Foam Gun; once cured, the foam can be cut, sawn or plastered over after only one hour.

  USES

  Filling

  – Gaps around pipe entries through fire-rated walls
  – To provide a fire-rating around window and door frames
  – Chasing electrical wire before plastering, where a fire rating is required.
  – Deep joints before applying sealant or plaster
  – Unusual gaps in stone, brick, concrete or plaster

  Fixing

  – Door frames
  – Timber structures
  – Windowsills and thresholds.
  – Window frames

  Insulation

  – Behind cladding
  – Behind barge boards & soffits

  CHARACTERISTICS

  – A vast degree of fire rating: slows down the passage of smoke & flames
  – Fast setting – can be cut, sawn or plastered in 1 hour.
  – Expands up to 50 times the original can size.
  – Fills unusual and deep gaps where most conventional fillers would fail.
  – Possesses insulating and sound deadening properties

  LIMITATIONS

  – Carefully read instructions and text in warning box before use.
  – Do not over-pressurise container.
  – Always apply above 5°C.

  For all other fire systems on our website, please click here.

  For any further info you may require on Everbuild products, please visit their website here.

  Add to basket

  View Details
• 

  Everbuild Firefoam B2 Gun Grade

  £6.22

  PRODUCT DESCRIPTION

  Everbuild Firefoam B2 Gun Grade is a quick setting one part polyurethane foam with fire resistance properties. The foam expands on application 1.5 – 2 times the original size and meets all the requirements of DIN 4102 Part 1 & BS476 Part 20 for Construction Materials. Everbuild Firefoam B2 is fire-rated up to 2 hours in specific joint configurations. Once cured, the foam can be sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5oC to +25oC, ideally 20oC.

  USES

  – Filling gaps around pipe entries through fire-rated walls. To provide a fire-rated seal around window and doorframes.
  – Chasing electrical wire prior to plastering, where a fire rating is required.
  – Wide & deep joints prior to applying sealant or plaster.
  – Irregular sized gaps in brick, stone, concrete or plaster.

  Fixing

  – Door frames.
  – Timber structures.
  – Window sills and thresholds.
  – Window frames.

  Insulation

  – Behind cladding.
  – Behind barge boards & soffits.

  CHARACTERISTICS / ADVANTAGES

  – A high level of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades.
  – Fast setting – can be cut, sawn or plastered in 1 hour.
  – Economical – expands up to 50 times the canister size.
  – Fills unusual and broad gaps where most conventional fillers would fail.
  – Possesses insulating and sound deadening properties

  LIMITATIONS

  – Do not over pressurise container.
  – Always apply above 5oC.
  – Clean spills immediately with Everbuild Dual Purpose Foam Cleaner.

  For all other fire systems on our website, please shop here.

  For any further info you require on Everbuild products, please visit their website here.

  Add to basket

  View Details
• 

  Everbuild Firefoam B2 Hand Held

  £6.41

  PRODUCT DESCRIPTION

  Everbuild Firefoam B2 Handheld Fire Foam is a quick setting one part polyurethane foam with fire resistance properties. The foam expands on application 1.5 – 2 times the original size and meets all the requirements of DIN 4102 Part 1 & BS476 Part 20 for Construction Materials. Everbuild Firefoam B2 is fire-rated up to 2 hours in specific joint configurations. Once cured, the foam can be sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5oC to +25oC, ideally 20oC.

  USES

  – Filling gaps around pipe entries through fire-rated walls. To provide a fire-rated seal around window and doorframes.
  – Chasing electrical wire prior to plastering, where a fire rating is required.
  – Wide & deep joints prior to applying sealant or plaster.
  – Irregular sized gaps in brick, stone, concrete or plaster.

  Fixing

  – Door frames.
  – Timber structures.
  – Window sills and thresholds.
  – Window frames.

  Insulation

  – Behind cladding.
  – Behind barge boards & soffits.

  CHARACTERISTICS / ADVANTAGES

  – A high level of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades.
  – Fast setting – can be cut, sawn or plastered in 1 hour.
  – Economical – expands up to 50 times the canister size.
  – Fills unusual and broad gaps where most conventional fillers would fail.
  – Possesses insulating and sound deadening properties

  LIMITATIONS

  – Do not over pressurise container.
  – Always apply above 5oC.
  – Clean spills immediately with Everbuild Dual Purpose Foam Cleaner.

  For all other fire systems on our website, please shop here.

  For any further info you require on Everbuild products, please visit their website here.

  Add to basket

  View Details
• 

  Everbuild Gun Grade Expanding Foam

  £5.08

  Everbuild Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Designed for professional use in conjunction with Gun Foam Applicators.

  USES

  Filling

  – Gaps around pipe entries through walls.
  – Gaps around window frames, door frames.
  – Electrical wire chasing before plastering
  – Deep joints before applying sealant or plaster
  – Irregular gaps in stone, brick, concrete or plaster

  Fixing

  – Door frames
  – Timber structures
  – Window sills and thresholds.
  – Window frames

  Insulating

  – Behind cladding to exterior walls.
  – Behind soffit and barge boards

  CHARACTERISTICS / ADVANTAGES

  – Quick setting – can be cut, sawn or plastered in 1 hour.
  – Economical in use – expands up to 50 times its original volume.
  – Fills irregular and broad gaps where most conventional fillers would fail.
  – Possesses insulating and sound deadening properties.

  APPLICATION INSTRUCTIONS

  SUBSTRATE PREPARATION

  Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists in the curing process.

  APPLICATION METHOD / TOOLS

  ALWAYS WEAR PROTECTIVE GLOVES.

  Shake can well before use (about 20 times). Carefully fix nozzle. Do not overtighten or force.

  ALWAYS USE CAN UPSIDE DOWN.

  For EVERBUILD® Gun Grade Expanding Foam, tighten securely into one of our range of guns. Only partially fill cavities as the foam will expand to fill the remaining space. Any excess foam can be removed while still wet with Everbuild Foam Cleaner. Cured foam must be removed mechanically. When used for fixing door frames, supports must be used until the foam is fully cured.

  Please note:

  When transported in cars, keep in the boot, out of direct sunlight. When removing cured foam from the skin, take care not to damage with abrasives.

  IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild Foam Cleaner before the foam has cured. Do not push any object into the valve as the contents may explode.

  LIMITATIONS

  – Carefully read instructions and text in warning box before use.
  – Do not the over-pressurise container.
  – Always apply above 5°C.
  – Clean spills immediately with Everbuild Foam Cleaner.
  – When using EVERBUILD® Gun Grade Expanding Foam, always clean the gun thoroughly with Everbuild Foam Cleaner until the jet is clear of foam.
  – Leave the canister attached until the gun is to be used again
  – When applying, always remove the nozzle from the can and clean immediately after use with Everbuild Foam Cleaner
  – For fire rated joints, use Everbuild Firefoam B1 in conjunction with Everbuild Firemate intumescent sealant.
  – Once cured, the dry foam must be removed mechanically. No solvent will remove the product.

  For all other expanding foams on our website, please click here.

  For any further information you may need on Everbuild products, please visit their website here.

  Add to basket

  View Details
• 

  illbruck FM310 Pro Foam – Box of 12

  £51.48

  illbruck FM310 is a rapid curing, gun grade expanding polyurethane foam that is suitable for general gap filling, bonding and insulation applications. Typical applications include perimeter sealing & fixing of windows & doors.

  Description

  illbruck FM310 is a rapid curing gun grade expanding polyurethane foam that is suitable for general gap filling, bonding and insulation applications.

  – Ideal for sealing & filling insulation of joints in a variety of building and construction applications

  Product Benefits

  – Low post-expansion improves the accuracy of delivery, reduces foam wastage and minimises the cutting time
  – Forms a strong bond to a number of surfaces. Such as concrete, brickwork, stone, plaster, wood, fibre concrete, metal, PVC and polystyrene
  – Rapid curing formulation: Foam is tack-free within 10 minutes, and can be cut or trimmed within 45 minutes

  Use

  – Always carry-out a small test to confirm compatibility.
  – Protect floor coverings with paper or a plastic film.
  – The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed.
  – Remove all loose particles, dust and grease.
  – A speedier cure can be attained by moistening the substrates if needed.

  For all other illbruck items on our website, please click here.

  For any further information you need on illbruck products, please click here.

  Add to basket

  View Details
• 

  illbruck FM330 Pro Foam Air Seal – Box of 12

  £86.76

  illbruck FM330 is one part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, airtightness and acoustic properties. It has excellent adhesion to a full range of building substrates, such as brick, block, plaster, stone and cementitious materials as well as wood & metal.

  Area of application

  illbruck FM330 is ideal for airtight gap filling in general construction joints – including where movement is expected to occur.
  It is suitable for applications such as airtight window and door perimeter joint seals, sealing floor to wall and wall to ceiling joints and pipe & service penetrations.

  Product Benefits

  – A high-performance PU foam with excellent acoustic and airtight performance
  – Airtight formulation – tested to EN 12114
  – Elastic performance – up to 50% movement capability
  – Can still be used at temperatures as low as -3°C
  – Low post-expansion facilitates more accurate application depth

  Application

  – Shake the canister vigorously at 20 times. Remove the protective cap & screw the gun onto the canister.
  – Invert can and direct nozzle into the gap, pressing gently on the trigger to establish the correct flow rate.
  – Underfill joints to allow for post-application expansion of the foam. Fill to approximately 80-90% of the joint depth
  – Applying a light spray of clean water between each layer before application
  – When filling deep joints, apply in layers & wait for each layer to skin and partially cure before applying the next.

  For all other illbruck products on our website, please click here.

  For any further information you require on illbruck products, please visit their website here.

  Add to basket

  View Details
• 

  illbruck FM610 Handy Foam – Box of 12

  £82.06

  illbruck FM610 is an expanding polyurethane foam that is suitable for general gap filling, bonding and insulation applications including, the perimeter sealing & fixing of windows & doors.

  Area of application

  illbruck FM610 applications include: the perimeter sealing and fixing of windows and doors, sealing of service penetrations and sealing around insulation panels.

  Description

  illbruck FM610 is a one-part, moisture curing, expanding polyurethane foam.

  Product Benefits

  – Ideal for sealing and insulation of joints and gaps in a variety of building and construction applications
  – The patented conical straw system increases yield by up to 15% compared to standard PU foam
  – Forms a strong bond to many substrates like concrete, brickwork, stone, plaster, wood, fibre concrete, metal, PVC and polystyrene
  – Rapid curing formulation: Foam is tack-free within 10 minutes, and can be cut or trimmed within 60 minutes

  Preparation

  – Always carry out a small test to check compatibility before use.
  – The surfaces must be dry, reliable, stable and capable of carrying the load of the panels to be installed.
  – Remove all loose particles, dust & grease

  Application

  – Shake the can vigorously around 20 times before removing the cap. – Screw the nozzle into the connector on the top of the can
  – Joints should be underfilled to allow for expansion of the foam. Fill to approximately 50% of the joint depth for best results
  – Applying a light spray of clean water between each layer before application will assist adhesion & cure speed.

  Cleaning

  Remove excess foam immediately with illbruck AA290 PU Cleaner or acetone. Ensure any surface requiring cleaning is solvent resistant before proceeding. Cured foam can only be removed mechanically.

  For all other illbruck products on our website, please click here.

  For further information you may need on illbruck products, please visit their website here.

  Add to basket

  View Details
• 

  illbruck PU700 Multi-Use Construction Adhesive – Box of 12

  £128.04

  Add to basket

  View Details
• 

  Soudal Gap Filling & Expanding Foam Genius 500ml

  £3.10

  Soudal Gap Filling Genius Gun is perfect for insulating and assembling, specially designed to ensure precise application & removing the need for an applicator gun like most foam systems.

  Key Features

  Self-expanding foam adheres to all common building materials. Resistant to water, heat and ageing. Ideal for filling large voids, gaps around window and door frames and around pipes.

  • H-CFC & CFC-Free Propellant
  • High Bond Strength
  • For Internal & External Use
  • Can be Sanded & Painted
  • Gloves Supplied
  • Controllable Hand-Held Foam
  • Accurate Trigger Control
  • Reusable for up to 6 Weeks
  • One-Handed Operation
    

    Brand	Soudal
    Container	Aerosol
    Location	Internal & external
    Litre capacity (ml)	500ml
    Drying time	1½ hours for a bead of 3cm
    Cure rate	Fast curing

  Characteristics

  Expands to around 30 times the size of the can. Is moisture curing & water-resistant, with excellent thermal insulating properties (better than many other insulation materials)

  Also creates sound protection where applied.

  Health and Safety

  Please note, this product could have potential health and safety hazards, that are covered in the safety documents. It is advised to refer to the container for full information and always follow the instructions provided.

  For any other foam systems on our website, please click here.

  For further information on Soudal products, please visit the website here.

  Select options

  View Details
• 

  Soudal Soudafoam Gap Filler Genius 600ml – Box of 12

  £41.66

  Soudafoam Gap Filler Genius – A POLYURETHANE expanding foam filler

  Gap filling formulation with high 3D expansion. Easy to use, one component. Rapid curing. Excellent thermal and acoustic insulation properties. The Gap filler Genius is a primerless adhesion on most construction materials. Genius Gun is a patented trigger mechanism, designed for easy use and single-handed operation. The re-sealable applicator enables the product to be re-used for up to 6 weeks after first use.

  PRODUCT APPLICATION

  General purpose gap filling: pipe penetrations, insulation and roofing materials and general construction.

  FEATURES & BENEFITS

  Polyurethane foam filler

  – Acoustic rating ISO 717-1: 58 dB
  – Thermal conductivity DIN 52612: 37mW/mK
  – Application temperatures: +5C to +30
  – Genius Gun® application for ease of use

  For our full Soudal range, please click here. For more in their foam range, please click here.

  For more details information on Soudal products, please visit their website.

  Add to basket

  View Details
• 

  Soudal Soudafoam Gun Gap Filler 750ml

  £3.23

  DESCRIPTION

  Soudal Soudafoam Gap Filler is an expanding foam filler. Soudal Soudafoam Gap filling formulation with high 3D expansion. Easy to use, one component. Rapid curing. Excellent thermal and acoustic insulation properties. Primerless adhesion on most construction materials. Available in Hand-Held and Genius Gun®, Gun Grade and Click & Fix® versions both come with DuraValave.

  CHARACTERISTICS

  – Polyurethane foam filler
  – Acoustic rating ISO 717-1: 58 dB
  – Thermal conductivity DIN 52612: 37mW/mK
  – Application temperatures: +5C to +30C
  – Hand-Held, Genius Gun®, Gun Grade and Click & Fix® versions.

  PROPERTIES

  – Excellent stability (no shrinkage or post-expansion)
  – High filling capacity
  – Excellent adhesion on all surfaces (except PE, PP and PTFE).
  – High insulation value, thermal and acoustic
  – Excellent bonding properties.

  APPLICATIONS

  General-purpose gap-filling: pipe penetrations, insulation and roofing materials and general construction.

  – Installing of window and door frames.
  – Filling of cavities.
  – Sealing of all openings in roof constructions.
  – Apply of an acoustic baffle
  – Improving thermal isolation in cooling systems.

  SHELF LIFE

  Twelve months unopened and stored in dry and cool conditions, Upright storage is recommended.

  Can temperature: +5 °C – 30 °C
  Ambient temperature: +5 °C – 30 °C.
  Surface temperature: +5 °C – 35 °C

  For all other foam systems on our website, please click here. for more in our Soudal range, click here.

  For any further info you may need on Soudal products, please visit their website here.

  Add to basket

  View Details
• 

  Soudal Trade Gap Filler Foam Genius 600ml – Box of 12

  £41.66

  Trade Gap Filler Foam Genius is a one component, self-expanding, ready to use PU foam, which contains HCFC- and CFC-free propellants that are not harmful to the ozone layer. It has been fitted with the unique patented Genius Gun – adaptor system for maximum comfort during application.

  PROPERTIES

  – Excellent stability (no shrinkage or post expansion)
  – High filling capacity
  – Good adhesion on all surfaces (except PE, PP and PTFE).
  – High insulation value, thermal and acoustic
  – Very good bonding properties.
  – Very precise to dose.
  – Elastic and compressible.
  – Freon free (not harmless to ozone layer and greenhouse effect)
  – Easy to dose
  – Fast curing
  – Not UV-resistant

  APPLICATION

  – All foam applications in static and not static joints.
  – Filling of cavities.
  – Sealing of all openings in roof constructions.
  – Apply a sound-absorbing layer.
  – Improving thermal isolation in cooling systems.

  APPLICATION METHOD

  Shake the aerosol can for at least 20 seconds. Open the cover and fold the tube horizontally. The surface should be free from grease and dust. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates, a preliminary adhesion test is recommended. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers, repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foamcleaner or acetone. Cured foam can only be removed mechanically or with Soudal PU-Remover.For storage: detach the bung, close the nozzle with bung, close the cap, and store the can upright.

  REMARKS

  – Slightly moistening of the surface in hollow spaces optimizes curing, good adhesion and yield.

  For more sealants, please click here. For our full range of Soudal products, please click here.

  For more information, please visit the Soudal website.

  Add to basket

  View Details