This chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface should
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX AF 835 is a water-based, solvent-free, and extremely low-odour acrylic emulsion tackifier designed for floorcoverings. This product is odourless when dry, offers a short airing time, and provides permanent tack while being resistant to biodegradation and plasticiser migration. It meets the stringent emission limits set by the EMICODE licence ‘EC1 PLUS’, ensuring minimal environmental impact. ARDEX AF 835 is ideal for securing carpet tiles with bitumen, felt, fleece, and PVC/PUR backings and can also function as a release adhesive for carpet underlays using the "double stick
ARDEX RAPIDLAY MEMBRANE is a specially coated, fiberglass-reinforced sheet underlay designed for efficient installation of floor coverings, particularly sheet vinyl, over a range of new or old sub-floors in residential and light commercial settings. It is suitable for diverse surfaces, including contaminated or damp sub-floors, old vinyl, ceramic tiles, sheet metal, and asphalt, offering a dimensionally stable and moisture-resistant base. This sheet underlay reduces installation time by bypassing typical drying periods, allows for easy removal of temporary flooring without adhesive d
£4.57 - £7.57 ex. VATThis chloride-free, water-based cementitious flooring compound is designed to provide a level base for internal floors and serves as an ideal, cost-effective underlay for modern floor finishes. It sets hard within 2-3.5 hours depending on temperature, with floor coverings able to be applied 6-8 hours after application. The product is pre-blended, requiring only the addition of water, and is economical to use. It can be applied up to 6mm thickness and is suitable for feathering to a smooth finish. Once mixed, it must be poured onto the subfloor within 20 minutes, and the surface shouldSelect options This product has multiple variants. The options may be chosen on the product page
