BAL Grout Flex Wall
£12.22 inc. VAT
£10.18 ex. VAT
- Suitable For: Porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone
- Area of use: EXT & INT
- Time to full cure: 24 hours (at 20°C)
- Volume: 5kg, 10kg
- Colour: White, Jasmine Cream, Light Grey, Mid Grey, Dark Grey
- Brand: BAL
- Manufactuer: BAL
- Box Size: 1
BAL Grout Flex is a highly polymer-modified, water- and frost-resistant grout with a built-in admixture that provides excellent flexibility, high bond strength, and durability. It is suitable for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone in both dry and wet interior and exterior environments. Set in approximately 24 hours at 20°C, it is recommended for joint widths up to 5mm and for use in demanding areas such as hard water swimming pools and power showers. Always follow BS Standards for minimum joint sizes and consult the BAL Technical Advisory and Specification Service for guidance in specialized applications.
Key Points:
– Water- and frost-resistant with built-in admixture for enhanced performance.
– Highly polymer-modified for flexibility, high bond strength, and durability.
– Suitable for joint widths up to 5mm in both interior and exterior environments, including wet areas.
– Ideal for porcelain, glazed and vitrified tiles, mosaics, marble, natural stone, and demanding applications like swimming pools and power showers.
For more in our range of grouts, please click here. For our full range of products from BAL, please click here.
For more information on BAL and their products, you can visit their website here
Suitable for :
– Grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone in both dry and wet interior and exterior environments. Follow BS Standards guidelines (minimum 2mm joints for walls; joint size may vary depending on tile size and environment). Contact BAL Technical Advisory and Specification Service for guidance.
– Suitable for joint widths up to 5mm.
– Recommended for areas with hard water, swimming pools, and power showers.
Restrictions: NOT suitable for
– Food preparation or storage areas, spas, jacuzzis, chemical plants, power showers with body jets, and areas requiring fully waterproof grouting.
MIXING
Use a BAL mixing bucket or other suitable container.
1. Slowly add approximately 3 parts powder to 1 part clean, cold water by weight (see table). Never exceed the recommended water amount, as this may cause colour inconsistencies in the finished grout.
2. Mix until a lump-free mortar is achieved.
3. Allow the mixed grout to stand for 2–3 minutes, then remix for 30 seconds. Do not add any additional water after the initial mixing. Avoid mixing at high speed to prevent entraining air.
APPLICATION
Grouting Procedure
1. Check for potential staining: apply grout to a small trial area. If discolouration occurs or cleaning is difficult, apply BAL Protective Sealer and repeat the trial.
2. Work in small areas with a grout float or squeegee. Completely fill the tile joints with mixed grout, compacting well, and remove excess grout from the tile surface as you go.
3. Allow approximately 15 minutes (at 20°C) for the grout surface to become touch-dry (not fully cured).
4. Using a damp sponge or sponge board, clean diagonally across the grout lines, using as little water as possible and rinsing the sponge frequently. Do not let water enter ungrouted joints.
5. Once the grout has set within the joints, polish the tile surface with a dry, clean cloth.
6. Remove any remaining light haze the next day using water and a white emulsifying pad with a gripper.
7. Wait a minimum of 24 hours before subjecting the tiles to normal use.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.