FOSROC Primer 7 – Surface primer for polysulphide sealant
£34.99 inc. VAT
£29.16 ex. VAT
- Suitable For: priming concrete joint edges before the applying of Thioflex 600
- Area of use: INT & EXT
- Volume: 500ml, 5L
- Container Type: tin
- Type: primer
- Brand: FOSROC
- Manufactuer: FOSROC
- Box Size: 1
Fosroc primer 7 comes as a ready to use, brush-on liquid, that prepares porous surfaces such as stone, brickwork, concrete, timber and un-glazed edges of ceramic tiles before the application of Thioflex 600.
Primer 7 is a low viscosity one-component solvent-based priming system for concrete joints before the installation of Thioflex 600 joint sealants.
Advantages
– Fast-drying – enables sealant work to progress almost right away
– Single component – no mixing required, so can be easily applied
Technical Support
– Easy to use, brush applied primer
– Essential for use with Thioflex 600
– Widely used for the priming of movement joints in building and civil engineering structures that are being sealed with Thioflex 600
For all other FOSROC products on our website, please click here.
For any further information on Fosroc products, please visit their website here.
Fosroc Primer 7 is used to prime concrete joint edges before the applying of Thioflex 600 polysulphide joint sealants. If the joints are likely to be subject to long term moisture, then Primer 13 should be considered.
CLEANING
All tools and equipment should be cleaned immediately after use with Fosroc Solvent 10. Spillages should be absorbed with sand or sawdust and disposed of in accordance with local regulations.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.90 inc. VAT
£3.25 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£11.52 inc. VAT
£9.60 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.