Soudal Fibreglass Mat

• Product ID: 104442
• Suitable For: Repairing wood, polyester and metal
• Area of use: Repairs of metal, polyester and wooden surfaces
• Application Method: Repairing of small holes and dents in car body parts. Replacing or reinforcing of rusted through parts. Bigger damages on boats, surf boards,...
• Time to full cure: Depends on layers applied but generally from a range of 20 minutes to 2 hours
• Volume: Mat of 0.5 m² and 1 m²
• Container Type: Packet which contains the mat
• Type: Fiberglass Mat is an emulsified fibre glass mat
• Colour: White
• Brand: Soudal
• Manufactuer: The Soudal Group
• Box Size: 1

Fibreglass Mat

Works with Poly Liquid for extra-strong bonding

Ideal for repairing metal, wood, polyester, and more

• Automotive Repairs: Ideal for fixing small holes, dents, and rusted areas in car body panels.

• Marine Applications: Suitable for repairing fiberglass boats, surfboards, and other watercraft.

• General Surface Reinforcement: Can be used on metal, polyester, and wooden surfaces to restore structural integrity

Cut the Mat:
Cut the Fiberglass Mat to size, leaving about 3 cm extra on all sides. Fray the edges for a smooth finish.

Mix the Poly Liquid:
Mix the needed amount of Poly Liquid with 2–4% hardener until the colour is even.

Apply the Mixture:
Use a brush to apply some of the mix to the surface. Soak the mat in the mixture and press it firmly onto the area.

Build Layers (if needed):
Let it dry. For more strength, repeat with more layers—each layer should be 1 cm larger than the last.

Finish the Surface:
After it hardens, sand it down with coarse sandpaper or a grinding wheel. For a smooth finish, apply a thin layer of Metal Plastic.

Clean tools with: Acetone

Repairs: Use the same material

*Limitation*
Fiberglass can be easily torn and/or brittle