Sika SIKAGARD Woodworn Killer
£22.26 inc. VAT
£18.55 ex. VAT
- Product ID: 408177
- Suitable For: interior timber and joinery applications
- Area of use: INT
- Application Method: brush, spray, or dipping method
- Time to full cure: drying time - 1 hour
- Volume: 5L
- Container Type: tin
- Brand: sika
- Manufactuer: sika
Sika® Woodworm Killer is a low-odour, low-solvent timber treatment formulated to eliminate all life stages of wood-boring insects, including woodworm, while helping to prevent re-infestation. Using advanced micro-fine active technology and added insecticide, it penetrates deep into the wood for long-lasting protection and is suitable for interior applications such as furniture, window and door frames, floorboards, and joists. The fast-drying, non-flammable formula can also be overpainted once dry.
Key Points:
– Kills all types and life stages of wood-boring insects, including woodworm
– Deep-penetrating formula provides long-lasting protection against re-infestation
– Suitable for interior timber applications such as furniture, floorboards, joists, and frames
– Fast-drying, non-flammable, low-odour formula that can be overpainted after treatment
Shelf Life – Use within 2 years of manufacture.
Storage Conditions – Store at moderate (5°C – 30°C) temperatures in original containers away from children
For more in our range of treatments, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
– Suitable for use on most interior timber and joinery applications
– Ideal for furniture, doors, window frames, roof timbers, floorboards, joists, and rafters
– Provides protection against wood-boring insects in structural and decorative timber
– Can be overpainted, stained, varnished, or polished once fully dry
Consumption
– Apply 2 coats at a rate of 1 litre of product per 3 – 4m2 of surface.
– Dip end grains for a minimum of 3 minutes or flood thoroughly where dipping is not possible.
Waiting Time / Overcoating
– Drying time is approximately 1 hour depending on temperature
SUBSTRATE QUALITY / PRE-TREATMENT
– Ensure the timber is clean and free from dirt, dust, paint, varnish, or other surface coatings before treatment.
– Remove and replace any severely infested or structurally unsound timber prior to application.
APPLICATION
1. Read all statutory and safety requirements before use.
2. Shake well before application.
3. Apply by brush, spray, or dipping method.
4. When brushing or spraying, apply a minimum of two coats.
5. Apply the second coat after the first has soaked into the timber but before it has fully dried.
6. Pay particular attention to end grain areas, ensuring they are thoroughly saturated.
7. Where possible, dip or flood end grains for maximum protection.
CLEANING OF TOOLS
– Remove excess product from brushes, rollers, or spray equipment.
– Clean tools immediately after use with warm soapy water.
LIMITATIONS
– Ready to use; do not dilute.
– Not suitable for use in food preparation areas.
– For interior use only; do not use externally.
– The user is responsible for determining suitability for the intended application. If in doubt, contact Technical Services for advice.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.90 inc. VAT
£3.25 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£11.52 inc. VAT
£9.60 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.