Everbuild Triple Action Wood Treatment
From: £9.32 inc. VAT
£7.77 ex. VAT
- Suitable For: most wood products
- Area of use: EXT & INT
- Application Method: brush, spray or dipping
- Volume: 1L, 2.5L, 5L, 25L
- Container Type: tins
- Colour: dries clear
- Brand: everbuild
- Manufactuer: sika
EVERBUILD® Triple Action Wood Treatment is an all-in-one wood preservative designed to protect and preserve timber against wood rot, decay, fungi, algae, and wood-boring insects. Its solvent-free, low-odour formula uses advanced micro-fine active technology combined with fungicides, algaecides, and Permethrin to deliver deep penetration and superior protection compared to conventional wood treatments. Fast drying and non-flammable, it can be applied to both dry and damp timber without compromising performance, making it suitable for a wide range of internal and external wood preservation applications.
Key Points:
– Protects against wet rot, dry rot, decay, fungi, algae, and wood-boring insects.
– Deep-penetrating micro-fine technology provides long-lasting timber protection.
– Suitable for both internal and external use, including damp timber.
– Solvent-free, low-odour, fast-drying, and non-flammable formula.
Shelf Life – Use within 2 years of manufacture.
Storage Conditions – Store between +5 °C and +25 °C in original containers away from children
For more in our range of treatments, please click here. For our full range of products from Everbuild, please click here.
For more information on Everbuild and their products, you can visit their website here
Suitable for interior and exterior use on wood such as:
– Sheds and garages
– Fencing and farm buildings
– Roof beams and joists
– Garden furniture
– Floorboards
– Window frames and doors
SUBSTRATE QUALITY / PRE-TREATMENT
– Ensure all timber surfaces are clean and free from paint, varnish, stains, grease, bark, or any other contaminants before treatment. The product may be applied to damp timber. If any decay is present, remove all affected wood and replace it with sound, treated timber before application.
APPLICATION
– Shake the container thoroughly before use.
– Apply the product by brush, spray, or dipping. When brushing or spraying, apply a minimum of two coats, allowing the first coat to dry before applying the second.
– Pay particular attention to end grain areas, ensuring they are thoroughly saturated. For maximum protection, dip end grains for a minimum of 3 minutes wherever possible.
Note: The product appears milky when applied but dries clear.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.54 inc. VAT
£2.95 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.19 inc. VAT
£2.66 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.