Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity.
For more information on Arbo, please visit their website here.
For more in our range of sealants, please click here. For application guns to use with this p
Select options
This product has multiple variants. The options may be chosen on the product page
Mapei UltraCare Fuga is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application.
During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn't have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, or
Select options
This product has multiple variants. The options may be chosen on the product page
Ultracolor Plus forms a mortar with the following characteristics:
- water-repellent and droplet-effect
- colours resistant to ultra-violet rays and atmospheric agents
- ready for light foot traffic after a short period of time
- After that is shrinkage compensated, therefore free from cracks
Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3.
To calculate quantities, please use the Mapei grout calculator here
Select options
This product has multiple variants. The options may be chosen on the product page
Mapei Ultracolor Plus Tile Grout is a quick-setting and drying tile grout for grouting joints from 2 to 20 mm wide. Comes in 2kg and 5kg bags, the 5kg bag can be found here.
TECHNICAL CHARACTERISTICS
Ultracolor Plus creates a grouting mortar with the following features:
- Water-repellent and droplet-effect
- Colours resistant to ultra-violet rays and atmospheric agents
- After roughly 3 hours, ready for light foot traffic.
- After that is shrinkage compensated, therefore free from cracks
Therefore it has optimum resistance to abrasion, compression and flexural strength, even
Select options
This product has multiple variants. The options may be chosen on the product page
CM Stonesil is an elastic single-component silicone sealant for indoor and outdoor use, with up to 50% movement tolerance.
Low modulus non-staining sealant with anti-fungal properties.
Fast cure rate.
Outstanding UV, weather, and ageing resistance.
Adhesion to numerous substrates, such as granite, composite stones, ceramic tiles, brickwork, metals, plastics also compatible with copper.
Low modulus (conforms to ISO 11600 F&G 25 LM).
Movement capability up to 50% (ASTM C920 class 50).
Non-staining (ISO 16938-1, ASTM C 1248).
For more in
Select options
This product has multiple variants. The options may be chosen on the product page
CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable weathertight sealant. Along with the flexibility, the sealant operates within a large temperature range with excellent weathering. CM Bath & Kitchen is a premium silicone sealant product, used for exceptional finishes.
CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
– Excellent mechanical and chemical resistance, therefore excellent durability.
– A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
– Easy workability and finishing.
– Becomes ve
Select options
This product has multiple variants. The options may be chosen on the product page
Sealoflex Sanitary HM is a high modulus silicone sealant and adhesive with an acetoxy cure, offering remarkable tooling capabilities. It has been specially designed to cater to the needs of professional users. Suitable for use in a wide range of sanitary and plumbing scenarios, be it in industrial, commercial, or domestic settings. It excels in areas where a highly flexible bond is required, and remains resilient without shrinking or cracking. It has superb adhesion to various non-porous surfaces such as glass, ceramics, aluminum, and painted timber. Moreover, it
comes with the adde
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
- Excellent mechanical and chemical resistance, therefore excellent durability.
- A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
- Easy workability and finishing.
- Becomes very hard an
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm.
TECHNICAL CHARACTERISTICS
Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned.
The following features are obta
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms.
TECHNICAL CHARACTERISTICS
Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor SF is a super fine, high performance cementitious grout, polymer modified, for joints up to 4 mm.
TECHNICAL CHARACTERISTICS
Keracolor SF is a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and pigments. Keracolor SF is characterised by its unique rheological behaviour, making it particularly suitable for grouting narrow tile joints. When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the following characteristics: • good compressive and flexural strength and good resistance
Select options
This product has multiple variants. The options may be chosen on the product page
£2.97 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this pSelect options This product has multiple variants. The options may be chosen on the product page
£6.90 ex. VATMapei UltraCare Fuga is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application. During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn't have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, orSelect options This product has multiple variants. The options may be chosen on the product page
£11.98 - £22.63 ex. VATUltracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. To calculate quantities, please use the Mapei grout calculator hereSelect options This product has multiple variants. The options may be chosen on the product page
£5.64 - £6.75 ex. VATMapei Ultracolor Plus Tile Grout is a quick-setting and drying tile grout for grouting joints from 2 to 20 mm wide. Comes in 2kg and 5kg bags, the 5kg bag can be found here. TECHNICAL CHARACTERISTICS Ultracolor Plus creates a grouting mortar with the following features: - Water-repellent and droplet-effect - Colours resistant to ultra-violet rays and atmospheric agents - After roughly 3 hours, ready for light foot traffic. - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, evenSelect options This product has multiple variants. The options may be chosen on the product page
