Medium Grey

Filter Your Product

Product Type -

Product categories -

Product Type -

Product categories -

  • £6.90 ex. VAT
    £6.90 ex. VAT
      Mapei Fuga Fresca is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application. During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn't have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, or yo
  • £11.98 - £22.63 ex. VAT
    £11.98 - £22.63 ex. VAT
    Ultracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3.   To calculate quantities, please use the Mapei grout calculator here  
  • £5.64 - £6.75 ex. VAT
    £5.64 - £6.75 ex. VAT
    Mapei Ultracolor Plus Tile Grout is a quick-setting and drying tile grout for grouting joints from 2 to 20 mm wide. Comes in 2kg and 5kg bags, the 5kg bag can be found here. TECHNICAL CHARACTERISTICS Ultracolor Plus creates a grouting mortar with the following features: - Water-repellent and droplet-effect - Colours resistant to ultra-violet rays and atmospheric agents - After roughly 3 hours, ready for light foot traffic. - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even
  • £6.99 ex. VAT
    £6.99 ex. VAT
    CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable weathertight sealant. Along with the flexibility, the sealant operates within a large temperature range with excellent weathering. CM Bath & Kitchen is a premium silicone sealant product,  used for exceptional finishes. CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.
  • £27.24 ex. VAT
    £27.24 ex. VAT
      Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: – Excellent mechanical and chemical resistance, therefore excellent durability. – A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. – Easy workability and finishing. – Becomes ve
  • From: £6.99£0.99 ex. VAT
    From: £6.99£0.99 ex. VAT
    CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable weathertight sealant. Along with the flexibility, the sealant operates within a large temperature range with excellent weathering. CM Bath & Kitchen is a premium silicone sealant product,  used for exceptional finishes. CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.
  • £39.34 - £57.39 ex. VAT
    £39.34 - £57.39 ex. VAT
      Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: - Excellent mechanical and chemical resistance, therefore excellent durability. - A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. - Easy workability and finishing. - Becomes very hard an
  • £6.90 - £8.65 ex. VAT
    £6.90 - £8.65 ex. VAT
      Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm. TECHNICAL CHARACTERISTICS Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned. The following features are obta
  • £36.45 - £80.19 ex. VAT
    £36.45 - £80.19 ex. VAT
      Soudal Soudaseal 215LM is a 1-component, moisture-curing, low-modulus elastic joint sealant. Soudaseal 215LM is designed for the elastic joint sealing and waterproofing of movement and connection joints in buildings. Due to its very low modulus, it is also suitable for EIFS Facades.   CHARACTERISTICS – Tested and conform to ISO 11600-F-25LM – High bond strength on nearly all surfaces – Excellent adhesion and extrudability, even in adverse conditions – High-performance mechanical properties – Almost odourless – No bubble formation within sealant, even in wet
  • £7.41 ex. VAT
    £7.41 ex. VAT
      Keracolor SF is a super fine, high performance cementitious grout, polymer modified, for joints up to 4 mm. TECHNICAL CHARACTERISTICS Keracolor SF is a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and pigments. Keracolor SF is characterised by its unique rheological behaviour, making it particularly suitable for grouting narrow tile joints. When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the following characteristics: • good compressive and flexural strength and good resistance
  • £37.19 ex. VAT
    £37.19 ex. VAT
      Kerapoxy Easy Design is a two-component, decorative, epoxy resin-based grout, with silica sand and other special components, with excellent chemical resistance and easy cleaning properties. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. Kerapoxy Easy Design may be mixed with up to 10% by weight of MapeGlitter, metalized coloured glitter, to create particular special effects. The percentage depends on the aesthetical effect and workability desired. MapeGlitter is available in silver and light g
  • £155.95 ex. VAT
      illbruck SP525 is a low modulus sealant with high movement capability, excellent primerless adhesion to many substrates and long-term performance. It is also used for the bonding of ME500 & ME501 Intelligent Window Membranes. s sealant and adhesive formulated using advanced tremco illbruck SP polymer technology. It has high movement capability, excellent primerless adhesion to many substrates and long-term performance.   Product Benefit - Meets the requirements of EN ISO 11600 F 25LM - Formulation based on advanced SP polymer technology - High movement, rapid curi