Silver Grey

Filter Your Product

Product Type -

Product categories -

Product Type -

Product categories -

  • £6.90 ex. VAT
    £6.90 ex. VAT
      Mapei Fuga Fresca is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application. During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn't have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, or yo
  • £11.98 - £22.63 ex. VAT
    £11.98 - £22.63 ex. VAT
    Ultracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3.   To calculate quantities, please use the Mapei grout calculator here  
  • £5.64 - £6.75 ex. VAT
    £5.64 - £6.75 ex. VAT
    Mapei Ultracolor Plus Tile Grout is a quick-setting and drying tile grout for grouting joints from 2 to 20 mm wide. Comes in 2kg and 5kg bags, the 5kg bag can be found here. TECHNICAL CHARACTERISTICS Ultracolor Plus creates a grouting mortar with the following features: - Water-repellent and droplet-effect - Colours resistant to ultra-violet rays and atmospheric agents - After roughly 3 hours, ready for light foot traffic. - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even
  • £6.99 ex. VAT
    £6.99 ex. VAT
    CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable weathertight sealant. Along with the flexibility, the sealant operates within a large temperature range with excellent weathering. CM Bath & Kitchen is a premium silicone sealant product,  used for exceptional finishes. CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.
  • £27.24 ex. VAT
    £27.24 ex. VAT
      Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: – Excellent mechanical and chemical resistance, therefore excellent durability. – A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. – Easy workability and finishing. – Becomes ve
  • £39.34 - £57.39 ex. VAT
    £39.34 - £57.39 ex. VAT
      Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: - Excellent mechanical and chemical resistance, therefore excellent durability. - A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene. - Easy workability and finishing. - Becomes very hard an
  • £6.90 - £8.65 ex. VAT
    £6.90 - £8.65 ex. VAT
      Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm. TECHNICAL CHARACTERISTICS Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned. The following features are obta
  • £32.02 ex. VAT
    £32.02 ex. VAT
    Kerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms. TECHNICAL CHARACTERISTICS Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo
  • £37.19 ex. VAT
    £37.19 ex. VAT
      Kerapoxy Easy Design is a two-component, decorative, epoxy resin-based grout, with silica sand and other special components, with excellent chemical resistance and easy cleaning properties. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. Kerapoxy Easy Design may be mixed with up to 10% by weight of MapeGlitter, metalized coloured glitter, to create particular special effects. The percentage depends on the aesthetical effect and workability desired. MapeGlitter is available in silver and light g
  • £76.95 ex. VAT
    £76.95 ex. VAT
      Silirub 2S is a premium grade, low modulus neutral cure, sanitary silicone. Contains a powerful anti-fungicidal agent. Very fast skinning time and final cure. Thick-bodied. Primerless adhesion on all sanitary materials, including plastics. Highly elastic. Resistant to UV, rain, snow, Food contact certificate available. FEATURES & BENEFITS - Low modulus neutral cure silicone - 100% silicone - Primerless adhesion on most surfaces - Independantly tested to ISO 11600 F&G 25 LM - XS1 fungicide   For an application gun for this product, please click here. For
  • £181.33 ex. VAT
    £181.33 ex. VAT
    Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface. The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood. It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement. Performs w
  • £33.95 ex. VAT
      Steri-Grout is a specially formulated, polymer modified cement based floor and wall tile grout. Recommended for sanitary installations ie. kitchens, bathrooms, toilets and shower rooms. Containing a strong fungicide it will also inhibit black spot mould growth.   For application guns for this product, please click here. For all other Bond-it products on our website, please click here. For any further information you may need on Bond-it, please visit their website here.