Compounds
-
£15.92 ex. VATSikafloor®-360 Level Fibre is a fibre-reinforced, cement-based, protein-free powder designed for smoothing and levelling uneven floors and screeds from 3–60 mm when mixed with water. It is suitable for use with underfloor heating systems and contains powdered polymer, removing the need for costly separate latex additives. When mixed according to instructions, Sikafloor®-360 Level Fibre produces a free-flowing compound that sets in just 4 hours and can be overlaid after 8 hours under normal conditions. -
£31.73 ex. VATARDEX K 15 is a heavy-duty, rapid-drying, self-leveling smoothing compound that is pumpable and designed for efficient leveling and smoothing of various internal subfloors. Thanks to its unique rapid-drying properties, floorcoverings can be applied as quickly as 4 hours after ARDEX K 15 is laid. This product is ideal for leveling and smoothing uneven internal surfaces in a single application, including concrete, cement/sand screeds, porcelain, ceramic, quarry tiles, and anhydrite screeds, before floorcovering installation. It’s commonly used to correct issues like uneven or damaged
-
£887.66 ex. VATUltraplan Renovation Screed 3240 is a fibre-reinforced self-levelling compound designed specifically for refurbishing existing floors in both commercial and residential settings. This versatile product can be applied by hand or with a pump, making it suitable for interior levelling, smoothing, and filling in surface differences. Key Points: Fiber-Reinforced: The screed contains fibres for enhanced strength and durability. Versatile Application: It can be applied either by hand or using a pump, allowing for flexibility based on project needs. Interior Use: Specif
-
£7.28 ex. VATBond It Rapid Setting Water Plug is a cement-based, fast-curing, watertight compound designed to plug running water leaks and seal cracks and joints before applying Bond It Tanking Slurry (BDH107). It cures in less than 2 minutes, forming a strong, watertight barrier that can also be used to anchor fixings. To use, cut the holes or cracks into a square shape, mix the compound with water to form a putty, then apply it by hand or with a trowel, pressing it firmly into place until it sets. Once the water stops running, trim the plug flush if needed. Key Points: Seals and f
-
£12.99 ex. VATARDEX Fine Aggregate is a dry, pre-packed, washed, and graded silica quartz sand designed for fully blinding ARDEX products and enhancing bonding in construction applications. Sourced from Leighton Buzzard, Bedfordshire, UK, it is a key component in ARDEX subfloor smoothing compounds and epoxy primers. This versatile aggregate creates a "sandpaper" finish when used for blinding ARDEX R3E, R5E, R6E, and PSRS and ensures strong adhesion when paired with ARDEX epoxy primers and smoothing compounds. For optimal performance, it should be stored in unopened packaging in a cool, dry place,
-
£20.02 - £87.96 ex. VATSika® Black Jack®-905 All Weather Roof Coating is a solvent-based, full-bodied, black bitumen compound reinforced with fibres, designed for general waterproofing of roofs, guttering (non-plastic), and structural steelwork. It dries to a tough, durable black coating and is resistant to rain wash-off almost immediately, making it ideal for winter use. The product can be applied by brush to a wide variety of roof surfaces. This includes asphalt, built-up felt, concrete decks, cement sheeting, metal sheets (iron, steel, zinc, and lead), slates, and tiles. It may also be combined with rot-proof hSelect options This product has multiple variants. The options may be chosen on the product page
-
£25.26 ex. VATARDEX K 55 FAST is a cutting-edge subfloor smoothing compound formulated for rapid hardening, ideal for projects that require minimal installation time for floor finishes. When mixed with water, it creates an exceptionally fluid, self-levelling mortar that can be applied in a single operation, ranging from a feather edge to a maximum thickness of 10 mm. Depending on the substrate and application thickness, the surface can typically be walked on within approximately 30 minutes at 20°C. Once sufficiently hardened, floor coverings can be installed as soon as 60 minutes later for applic
-
£21.38 ex. VATLevelMaster Rapid Level 30 is a rapid-setting, protein-free, latex-modified, high-performance cementitious floor levelling compound suitable for thicknesses from 3mm to 50mm (or up to 60mm with added aggregate). To prepare, mix a 20kg bag with 3.6L of clean water, adding the powder gradually while stirring with a slow-speed drill or paddle for approximately 3 minutes until smooth and lump-free. Pour onto the prepared surface and trowel to a smooth finish. Work within 15 minutes, and do not add extra water once the mix begins to set. Key Points: Fast setting – sets in
-
£27.58 - £31.89 ex. VATSika FastFix All Weather is a ready-to-use, self-setting paving jointing compound featuring Active Resin Technology for enhanced durability. Ideal for outdoor patios, pavements, and paths, it is designed for joints over 5 mm wide and 20 mm deep. This fast and easy-to-apply product sets hard without shrinking or cracking, remains highly water-permeable to prevent pooling, and can be used in any weather, even rain. Additionally, it can be stored and reused after opening to minimize waste and provides a natural barrier for weed growth. Key Points: Versatile ApplicationSelect options This product has multiple variants. The options may be chosen on the product page
-
£31.31 ex. VATBAL Level Out is a high-performance, fast-setting external leveller designed to smooth rough or impact-damaged concrete bases prior to tiling. Easy to use and free-flowing, it can be applied from 2mm to 20mm in a single application and is walkable after just 2 hours and ready for tiling after 3 hours at 20°C. With a 30-minute pot life, reduced water option for gradient levelling, and excellent water and frost resistance, BAL Level Out provides a durable and reliable solution for external levelling projects. Key Points - Fast-setting external leveller for concrete bases - Apply from 2–2
-
£12.04 ex. VATThis protein-free, flexible, high-performance cementitious floor levelling compound is ideal for internal use and can be applied in thicknesses ranging from 3mm to 50mm (or 10 to 60mm when bulked with 3mm granite chippings). It offers high early strength, is pumpable, and features a low-odor, water-mix formulation that is CE Approved. The compound is perfect for levelling common internal subfloors before installing floor coverings such as ceramic tiles, carpet, vinyl, and wood flooring, with a minimum levelling thickness of 3mm. It is also compatible with underfloor heating systems and
-
£21.38 ex. VATARDEX K 11 is a rapid hardening, free-flowing leveling and smoothing compound specifically designed to address a variety of sub-floor types, including cement/sand screeds, gypsum screeds, and concrete. This versatile product can be applied in a single layer up to a maximum thickness of 10mm, while still maintaining its excellent free-flowing properties even at thinner applications of just 2mm. Ideal for preparing uneven internal sub-floors before installing various floor coverings, ARDEX K 11 dries to a virtually tension-free layer. Under optimal conditions at 20°C, it allows for th
