Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Roofing Repair & Gutter

  • lead-mate-box-of-25

    Bond-it Flash Mate Lead Silicone – Box of 25

    £59.75

    Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.

    Uses

    Bond-it Flash Mate can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing roof lights, conservatories, soffit boards, glasshouses, industrial roofing systems, lead flashing and to prevent tile lifting and wind noise.

    It is ideal for use on:
    – Glass
    – Slate
    – All metals including lead and galvanised steel
    – Concrete and brick
    – GRP
    – Sealed timber
    – Plastics (including poly-carbonate)
    – Acrylics
    – PVCu
    – All painted surfaces

    Application

    Apply using a standard sealant gun. Cut the nozzle at a 45° angle using a sharp blade, to an opening slightly larger than the joint you wish to seal. Allow a minute or two before tooling for the best results. For bonding, press the two surfaces together before skinning commences. On very hot roofs skinning time will be much shorter. Once the silicone has been applied and tooled, the rain will not have any adverse effects on the sealant.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it, please visit their website here.

  • all-weather-box-of-12

    Bond-It Rain Mate All Weather Sealant – Box of 12

    £34.32

    Bond-It Rain Mate All Weather Sealant is a superior and highly flexible, water repellent, general purpose sealant that has excellent adhesion to all surfaces, even when damp.

    Uses

    It suitable for use on brick, concrete, stone, all metals, painted or bare wood, glass, vinyl and most plastics. Also, it is compatible with bitumen and asphalt for roof repairs in damp conditions. Finally, it is ideal for sealing doors, windows, roofs, cladding and vehicle bodies.

    Application

    Primers are not usually required. For application in damper conditions, disburse any standing water and residual dirt from the substrate.  Dry the surface as well as possible with either a cloth or paper towel prior to applying sealant. All RAIN-MATE colours will adhere to bitumen and asphalt but we only recommend black for this purpose as unsightly discolouration can occur with white and clear.

    Limitations

    Not for use on polystyrene, polycarbonate, plastic roof lights or other surfaces sensitive to solvents. Do not apply at over 60o C or on surfaces which exceed 80o C in use.

    Health & Safety

    Please refer to the safety data sheet for full handling, use and storage instructions. Keep out of reach of children.

    For all other Bond-it products on our website, please click here.

    For any futher information you may need on Bond-it, please visit their website here.

  • roof-and-gutter-box-of-25

    Bond-It Roof & Gutter Mate Sealant – Box of 25

    £33.75

    Bond-It Roof & Gutter Mate is suitable for repairing and maintaining general roofing and roof drainage systems. It forms a flexible seal that remains flexible for up to 15 years with a movement allowance of 5%.

    It is ideal for use on a range of construction substrates, such as:

    – Metal
    – Construction grade plastics
    – Paint
    – Stone
    – Brick
    – Bitumen

    PREPARATION

    Ensure all surfaces are clean and free from grease or any contaminants that may hinder adhesion. Loose materials and signs of corrosion must be removed before application as they will also hinder adhesion.

    APPLICATION

    Apply using a standard sealant gun. Cut tip from the cartridge, be careful not to damage the screw thread. Cut the nozzle at an angle of 45° and fix to the cartridge. Using a caulking gun force the sealant
    into the joint. When a deep joint is being sealed, a backing tape should be applied.

    COLOURS

    Bond-It Roof & Gutter Mate comes in black only.

    SHELF LIFE

    Use within 2 years from the date of manufacture.
    Store in unopened cartridges in a cool & dry environment.

    For all other Bond-it products on our website, please click here.

    For any further information you may need on Bond-it products, please visit their website here.

  • ct1-sealant

    CT1 Sealant & Adhesive

    £12.95 £10.99

    CT1 Sealant and Adhesive

    The One-Stop Product for all Sealing and Bonding

    CT1 is a construction adhesive that will never shrink or crack, and it can be structured and painted with any type of paint. When applying conventional sealants, the surfaces have to be dry. As a sealant, CT1 can be applied onto wet surfaces, even underwater.

    It is also the perfect product to seal baths and showers, windows, doors, roofs, gutters, virtually anything. Available in a range of colours, simply select from the drop-down menu: Clear, Black, Brown, Grey, White, Silver, Oak and Beige. For a wide range of internal sealant colours please refer to Mapesil AC.

    In other words, it is the only product on the market that is 100% ecologically compliant. As an adhesive, CT1 will create a formidable bond between virtually any materials also acting as a construction adhesive that will successfully bond all building materials. For instance, metals, glass, mirror, fibreglass, plastics, and stone, concrete, the list is endless.

    Above all, the adhesive to use for a multitude of applications is CT1, creating a permanent bond that will resist extreme loads, pressure and tensile strain.

    Will successfully bond

    • Polystyrene
    • Metals (including lead)
    • Glass – Special mirror adhesive can be found here.
    • Mirrors
    • All Woods
    • Plastics (excluding Polypropylene)
    • Fibreglass
    • Tiles
    • Concrete
    • Most Stones (without staining)
    • Most Synthetic Materials

    Unique adhesion on virtually any material in most applications without the need for additional fixings. Therefore, CT1 is the ultimate solution for interior and exterior bonding and sealing.

    • Excellent resistance to chemicals
    • UV resistant
    • Perfect for marine and boating maintenance, accident and emergency repairs
    • Odourless
    • Does not shrink
    • Can be painted
    • Contains no solvents
    • No isocyanates
    • Unique flexibility
    • 8 colours to choose from Black, Brown, Grey, White, Oak, Clear, Beige and Silver. For further information on this product, please visit the CT1 website here.
  • 791-silicone-box

    Dow Corning 791 – Box of 12 – Weatherproof Low Mod Silicone

    £54.00£55.20

    Box of 12

    Dow Corning 791 or DC 791 is a low modulus, neutral cure, alkoxy, odourless silicone sealant. It is specifically designed for the weather sealing of building components where high movement is anticipated. DC 791 adheres to a wide range of both porous and non-porous surfaces without the need for priming.

    USES

    – Perimeter pointing internally and externally around uPVC /wood and aluminium.
    – Sealing and as an adhesive onto uPVC, plastic trims and components.
    – Can be used for sealing soft metals. For instance, lead, copper and zinc.
    – For weather sealing and joint sealing on pre-formed panels, Can also be used on curtain walls and glazing sealing.
    – Glass to glass sealing and glass to aluminium sealing. Parapet and roof weather sealing applications.
    – Suitable as an expansion joint sealant.
    – Bedding and sealing of Insulated Glass units.

    CHARACTERISTICS / ADVANTAGES

    – Excellent tooling and slow skinning properties. Therefore, it is ideal for large scale construction and glazing applications.
    – Has excellent adhesion – adheres to most common surfaces. For instance, glass, metals, plastics and wood (painted or unpainted), uPVC and polycarbonate.
    – Excellent external weathering properties, therefore, can be guaranteed over many years worth of exposure.
    – High viscosity non-slump formula. In other words, it will hold it’s structure & body on even larger joints.
    – Resistant to fumed Hydrogen Peroxide and fumed Formaldehyde.

    APPLICATION INSTRUCTIONS

    PRIMER

    Dow Corning 791 does not require a primer on most common surfaces, although adhesion tests are recommended before full-scale application. However, if the joint is likely to be immersed or if adhesion is poor (especially on porous surfaces) use a Dow Corning Primer.

    SUBSTRATE PREPARATION

    Ensure that the desired application area is dry and clean, containing no grease or other contaminants. For instance, remove dust with compressed air or de-grease by using a solvent soaked pad, following by wiping with a clean cloth.

    LIMITATIONS

    – Not to be used with bitumen asphalt, neoprene and certain organic elastomers, please refer to the datasheet.
    – Can not be used in the manufacture of Aquariums.
    – Non-overpaintable.
    – Not recommended for use as a mirror adhesive.
    – Do not use on food grade applications
    – Do not use for in and around swimming pools. DC 791 is not suitable for swimming pool areas.
    – Can yellow if exposed to bleach or HCl based brick cleaners while curing.

    For any other Dow Corning products on our website, please click here.

  • dc-791

    Dow Corning 791 Weatherproof Low Mod Silicone

    £4.59£4.69

    Dow Corning 791 or DC 791 is a low modulus, neutral cure, alkoxy, odourless silicone sealant. It is specifically designed for the weather sealing of building components where high movement is anticipated. DC 791 adheres to a wide range of both porous and non-porous surfaces without the need for priming.

    USES

    – Perimeter pointing internally and externally around uPVC /wood and aluminium.
    – Sealing and as an adhesive onto uPVC, plastic trims and components.
    – Can be used for sealing soft metals. For instance, lead, copper and zinc.
    – For weather sealing and joint sealing on pre-formed panels, Can also be used on curtain walls and glazing sealing.
    – Glass to glass sealing and glass to aluminium sealing. Parapet and roof weather sealing applications.
    – Suitable as an expansion joint sealant.
    – Bedding and sealing of Insulated Glass units.

    CHARACTERISTICS / ADVANTAGES

    – Excellent tooling and slow skinning properties. Therefore, it is ideal for large scale construction and glazing applications.
    – Has excellent adhesion – adheres to most common surfaces. For instance, glass, metals, plastics and wood (painted or unpainted), uPVC and polycarbonate.
    – Excellent external weathering properties, therefore, can be guaranteed over many years worth of exposure.
    – High viscosity non-slump formula. In other words, it will hold it’s structure & body on even larger joints.
    – Resistant to fumed Hydrogen Peroxide and fumed Formaldehyde.

    APPLICATION INSTRUCTIONS

    PRIMER

    Dow Corning 791 does not require a primer on most common surfaces, although adhesion tests are recommended before full-scale application. However, if the joint is likely to be immersed or if adhesion is poor (especially on porous surfaces) use a Dow Corning Primer.

    SUBSTRATE PREPARATION

    Ensure that the desired application area is dry and clean, containing no grease or other contaminants. For instance, remove dust with compressed air or de-grease by using a solvent soaked pad, following by wiping with a clean cloth.

    LIMITATIONS

    – Not to be used with bitumen asphalt, neoprene and certain organic elastomers, please refer to the datasheet.
    – Can not be used in the manufacture of Aquariums, use Aqua mate or CT1
    – Non-overpaintable.
    – Not recommended for use as a mirror adhesive.
    – Do not use on food grade applications
    – Do not use for in and around swimming pools. DC 791 is not suitable for swimming pool areas.
    – Can yellow if exposed to bleach or HCl based brick cleaners while curing.


    For any other Dow Corning products on our website, please click here.

  • dow-corning-c60

    Dow Corning C60 Low Modulus Silicone

    £3.35£3.40

    Dow Corning C60 Low Modulus Silicone Sealant is a one-part sealant, which has been specially developed for use by the sealant contractor. It has excellent adhesion to a range of porous and non-porous substrates. Such as PVCU, glass, anodized and painted aluminium, metal cladding, brickwork, painted and unpainted wood.

    HOW TO USE DOW CORNING C60

    Surface Preparation

    Ensure that surfaces to be sealed are clean, dry, sound and free from frost. Clean all joints of release agents, water repellents, laitance, dust, dirt, old sealants and other contaminants, which could impair adhesion.

    Non-porous surfaces should be cleaned by wiping with a suitable solvent such as DOW CORNING R40 Universal Cleaner on an oil and lint-free cloth. Porous substrates should be mechanically cleaned using a steel brush or any similar means.

    Masking

    Areas adjacent to the joints should be masked with tape to prevent contamination of the substrates and to ensure a neat sealant line. Masking tape should be removed immediately after.

    Priming

    No primer is required for PVC-U and most common construction substrates. However, a test placement before general use is always recommended. Also, please refer to the Dow Corning Primer Guide if unsure.

    Backing Materials

    Closed cell polyethene backer rod is recommended as a backup material to provide back pressure and avoid three-sided adhesion. This limits the sealant movement capability. Low tack tape should be used in joints too shallow to allow the use of the backer rod.

    Finishing

    The joint should be tooled within 5 minutes of application to ensure good contact between the sealant and the substrate. Tooling of the sealant also gives a smooth, professional finish.

    Clean-Up

    The excess sealant may be cleaned off tools and non-porous surfaces while in an uncured state using DOW CORNING R40. If the sealant is misapplied to porous substrates, it should be left until just cured, and then removed by cutting or other mechanical means.

    STORAGE

    DOW CORNING C60 Silicone Sealant should be stored in cool and dry conditions. When stored at or below 30° in the original unopened container. Also, DOW CORNING C60 Silicone Sealant has a shelf life of 12 months.

    LIMITATIONS

    – Should not be used in structural glazing or insulating glazing.
    – Do not use on bituminous substrates, substrates based on natural rubber or EPDM
    – Do not use in a confined space because the sealant requires atmospheric moisture to cure.
    – It is not recommended for use on submerged joints or in joints where abrasion will occur.

  • Dow-corning-c60-box

    Dow Corning C60 Low Modulus Silicone – Box of 20

    £66.00

    Box of 20

    Dow Corning C60 Low Modulus Silicone Sealant is a one-part sealant, which has been specially developed for use by the sealant contractor. It has excellent adhesion to a range of porous and non-porous substrates. Such as PVCU, glass, anodized and painted aluminium, metal cladding, brickwork, painted and unpainted wood.

    HOW TO USE DOW CORNING C60

    Surface Preparation

    Ensure that surfaces to be sealed are clean, dry, sound and free from frost. Clean all joints of release agents, water repellents, laitance, dust, dirt, old sealants and other contaminants, which could impair adhesion.

    Non-porous surfaces should be cleaned by wiping with a suitable solvent such as DOW CORNING R40 Universal Cleaner on an oil and lint-free cloth. Porous substrates should be mechanically cleaned using a steel brush or any similar means.

    Masking

    Areas adjacent to the joints should be masked with tape to prevent contamination of the substrates and to ensure a neat sealant line. Masking tape should be removed immediately after.

    Priming

    No primer is required for PVC-U and most common construction substrates. However, a test placement before general use is always recommended. Also, please refer to the Dow Corning Primer Guide if unsure.

    Backing Materials

    Closed cell polyethene backer rod is recommended as a backup material to provide back pressure and avoid three-sided adhesion. This limits the sealant movement capability. Low tack tape should be used in joints too shallow to allow the use of the backer rod.

    Finishing

    The joint should be tooled within 5 minutes of application to ensure good contact between the sealant and the substrate. Tooling of the sealant also gives a smooth, professional finish.

    Clean-Up

    The excess sealant may be cleaned off tools and non-porous surfaces while in an uncured state using DOW CORNING R40. If the sealant is misapplied to porous substrates, it should be left until just cured, and then removed by cutting or other mechanical means.

    STORAGE

    DOW CORNING C60 Silicone Sealant should be stored in cool and dry conditions. When stored at or below 30° in the original unopened container. Also, DOW CORNING C60 Silicone Sealant has a shelf life of 12 months.

    LIMITATIONS

    – Should not be used in structural glazing or insulating glazing.
    – Do not use on bituminous substrates, substrates based on natural rubber or EPDM
    – Do not use in a confined space because the sealant requires atmospheric moisture to cure.
    – It is not recommended for use on submerged joints or in joints where abrasion will occur.

  • EB25-Everbuild

    EB25 Ultimate Sealant & Construction Adhesive – Box of 12

    £143.76

    EB25 has been launched in 2019 to celebrate their 25 years of Everbuild.

    EB25 is the Ultimate Sealant and Adhesive, covering the broadest range of application, sealant and adhesive areas. It is a polymer blend sealant giving it additional flexibility and bonding strength you can rely on in any situation. The makeup of this product allows the sealant to be used both internally and externally, in most weather conditions and can be used underwater. Everbuild have had EB25 certified for use in sanitary and food preparation areas and once cured is resistant to mould, temperature extremes, chemicals and more

    Colours – Black, White and Grey. Also, Crystal Clear that remains crystal clear and does no fog like similar products.

    Substrates that EB25 bonds to:

    • Metal
    • Wood
    • Brick
    • Concrete
    • Stone
    • Ceramic
    • Tile
    • Plastic
    • Glass

    PRODUCT DESCRIPTION

    Everbuild brings you their best ever sealant and adhesive – EB25, to celebrate their 25th anniversary. Using the most cutting-edge technology and an exclusive polymer blend, our R&D team has developed a truly universal, top quality hybrid. Therefore, it is incredibly flexible, certified for indoor and outdoor use, and in sanitary and food preparation areas (ISEGA). Plus, it’s powerful, sticks to just about anything and even works when applied underwater! Once cured, it’s resistant to mould, temperature extremes, chemicals, petrol, UV radiation, plus it does all this while being environmentally friendly.

    USES

    Bonding & sealing in almost every application imaginable. The following are just some examples: As a high-quality nail replacement adhesive, even to damp surfaces.

    – External and internal pointing around doors and windows.
    – Bonding mirrors to most common substrates.
    – Sealing vertical expansion joints.
    – Jointing cladding panels.

    SUBSTRATE PREPARATION

    All surfaces must be clean and dust-free. Surfaces may be damp but have no standing water. Therefore, it can be used underwater, but adhesion performance is reduced so should be applied as an emergency repair in these conditions only.


    For all other Everbuild products on our website, please click here. For general sealing, please see our DIY section and select the area you require.

    For any further information you require on Everbuild products, please visit their website here.

    This product is Everbuild’s equivalent of the CT1 range and can be used like for like.


     

  • everbuild-450+

    Everbuild 450 Builders Silicone

    £2.46

    Everbuild 450 Builders Silicone is a high-quality low modulus non-corrosive neutral cure sealant that adheres to virtually all surfaces. In other words, Everbuild 450 is typically used for construction expansion joints and perimeter pointing of all types of door and window frames.

    USES

    – Perimeter pointing internally and externally around PVCu /wood and all other window frames.
    – Sealing and as an adhesive onto PVCu, plastic trims and components.
    – Bedding insulated glass units in accordance with relevant clauses of BS8000 Part 7.
    – Suitable as an expansion joint sealant.
    – Weather sealing and joint sealing to pre-formed panels.
    – Glass to glass sealing.
    – Parapet and roof weather sealing applications.

    CHARACTERISTICS / ADVANTAGES

    – Excellent adhesion – adheres to most common surfaces..
    – Low dirt pick up – important in PVCu work.
    – Excellent flexibility – +/- 25%.
    – Excellent external weathering properties.
    – Suitable for use on polycarbonate.

    APPLICATION INSTRUCTIONS

    SUBSTRATE PREPARATION

    Improve adhesion by wiping the surface with EVERBUILD PVC SOLVENT CLEANER (PVC), EVERBUILD GLASS CLEANER (glass) or white spirits (painted surfaces).
    Priming is generally not needed, although we always advise testing small areas prior to use. If the use of primer is desired for non-porous surface use Silicone Primer
    NP2 or for porous surface use Silicone Primer P1.

    APPLICATION METHOD / TOOLS

    Cut the tip of the cartridge with a sharp blade, taking care not to damage the thread. Apply using a standard sealant gun. Best results will be obtained by keeping the gun at a constant angle to the surface being sealed. In addition, to ensure a proper bond, always smooth the sealant down.

    LIMITATIONS

    – Can not be used in conjunction with asphalt, neoprene and certain organic elastomers.
    – Do not use on services that bleed oil, solvents or plasticisers.
    – Not overpaintable. Use WEATHER MATE.
    – Can not be used as a mirror adhesive – Use MIRROR MATE.

    For all other Everbuild products on our website, please click here.

    Any further information you may need on Everbuild products, please visit their website here.

  • box-25-825

    Everbuild 825 – Box of 25 – External Sealant

    £65.00

    Box Of 25

    Everbuild 825 is an LM (low modulus), odourless silicone with a neutral cure. Everbuild 825 adheres to a wide range of both porous and non-porous surfaces without the need for priming.

    USES

    – Perimeter pointing internally and externally around uPVC /wood and aluminium.
    – Sealing and as an adhesive onto uPVC, plastic trims and components.
    – Can be used to seal soft metals, for example, lead, copper and zinc.
    – Weather sealing and joint sealing to pre-formed panels and curtain walling, glazing sealing and draught-proofing.
    – Everbuild 825 can be used for glass to glass and glass to aluminium sealing. Parapet and roof weather sealing applications.
    – Suitable as an expansion joint sealant.
    – Bedding and sealing of Insulated Glass units.

    CHARACTERISTICS / ADVANTAGES

    – Slow skinning time gives excellent tooling properties. Therefore, it is ideal for large scale construction and glazing applications.
    – Has excellent adhesion – adheres to most common surfaces. For instance, glass, metals, plastics and wood (painted or unpainted), uPVC and polycarbonate.
    – External weathering properties offering guarantees for many years worth of exposure.
    – High viscosity non-slump formula. In other words, it will hold it’s structure & body on even larger joints.
    – Resistant to fumed Hydrogen Peroxide and fumed Formaldehyde.

    APPLICATION INSTRUCTIONS

    PRIMER

    Everbuild 825 does not require a primer on most common surfaces, although adhesion tests are recommended before full-scale application. However, if the joint is likely to be immersed or if adhesion is weak (especially on porous surfaces) use Everbuild P1 Primer. To improve adhesion (if required) to non-porous surfaces, prime with Everbuild NP2 Primer (advised for aluminium).

    SUBSTRATE PREPARATION

    Areas that require application must be clean and dust-free. For instance, remove dirt with compressed air or de-grease by using a solvent soaked pad, following by wiping with a clean cloth.

    LIMITATIONS

    – Not to be used in combination with bitumen asphalt, neoprene and specific organic elastomers, please check the technical datasheet.
    – Can not be used in the manufacture of Aquariums or any submerged areas.
    – Not to be used on substrates that bleed oil, solvents or plasticisers, please refer to the technical datasheet.
    – Non-overpaintable.
    – Not recommended for use as a mirror adhesive.
    – Not for food-grade applications – Use Silicone 565
    – Chance of yellowing if in contact with bleach or HCl based brick cleaners, while curing.

    For further information on all Everbuild products, please visit their website here

  • everbuild-lead-mate

    Everbuild Lead Mate

    £4.95 £2.42

    Everbuild Lead Mate Sealant is a neutral cure, low modulus sealant that is specifically designed adhere to softer metals such as lead, brass etc. Similarly, the product is specially formulated as an alternative to mortaring, therefore making it ideal for Lead Flashing and Lead Sheet into Brick, Stone and Concrete.

    USES

    – Everbuild Lead Mate is a better alternative to mortaring in Lead flashing and lead sheet into brick, stone and concrete.
    – Sealing expansion joints.
    – Sealing softer metals such as lead, copper and zinc.
    – Parapet and roof weather sealing applications.

    CHARACTERISTICS / ADVANTAGES

    – High-performance adhesion to metals – will not stain (cement) or corrode soft metals unlike most conventional sealants
    – Low dirt pick up
    – Excellent flexibility +/- 25%.
    – Excellent low and high (+150°C) temperature resistance.
    – Low (<5%) shrinkage during vulcanisation.
    – Therefore it has Excellent external weathering properties

    APPLICATION INSTRUCTIONS

    PREPARATION

    The surfaces should be dry and free from dust, grease and other contaminants. We advise testing a small area before application to see whether the area will need primer, although priming is generally not essential.

    APPLICATION METHOD / TOOLS

    Cut the tip of the cartridge with a sharp blade, ensuring not to damage the thread. Attract the nozzle and cut at an angle of 45, with an opening slightly larger than the gap to be sealed.

    Apply using a standard sealant gun. To ensure the best possible bond, always smooth the sealant down. However, masking tape can be used to improve joints appearance. Apply tape to both sides of the joint, removing within 5 minutes of application.

    CLEANING OF TOOLS

    Uncured sealant white spirit, cured sealant EVERFLEX SILICONE EATER.

    LIMITATIONS

    – Do not use against bitumen asphalt, neoprene and specific organic elastomers.
    – Do not use on surfaces that bleed oil, solvents or plasticisers.

    For all other Everbuild products on our website, please click here.

    For any further information on Everbuild products, please visit their website here.

Gutter Sealant

Finding the right gutter sealant for your project can be confusing, especially with so many options on the market. However, at SSL we only stock high quality and reputable brands, therefore ordering your gutter and roofing sealant doesn’t need to be difficult.

Whether you are a seasoned expert in gutter sealants, or a complete novice, we have a sealant suitable for you. We also stock all of the tools and extras you may need as part of your gutter sealant application.

Gutter sealants must be able to withstand the changing weather and be flexible due to the nature of the joint. The range of sealants we stock have extremely detailed therefore you are able to understand the key points of each sealant before deciding on a gutter sealant for your project.

Alongside our gutter sealants we also provide a huge range of general, window, external and fire-resistant sealants. Whatever your requirements for sealants, foams and tools, we cover everything.

If you are a trade specialist in applying guttering and roofing sealants, we also provide bulk order discounts, with the option of opening a trade or credit account. For more information on the gutter sealants we provide, do not hesitate to get in touch with our experienced team.