Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

Acoustic Expanding Foam

  • everbuild-b1-fire-foam-gun-grade

    Everbuild Firefoam B1 Gun Grade

    £6.83

    Everbuild Firefoam B1 Gun Grade is a fast-setting, fire-rated, polyurethane foam. It expands upon application to yield up to 50 times the can contents and meets the extremely stringent requirements of the relevant test criteria. Everbuild Firefoam B1 is fire-rated up to 4 hours in specific joint configurations. For use with an Everbuild® Professional Foam Gun; once cured, the foam can be cut, sawn or plastered over after only one hour.

    USES

    Filling

    – Gaps around pipe entries through fire-rated walls
    – To provide a fire-rating around window and door frames
    – Chasing electrical wire before plastering, where a fire rating is required.
    – Deep joints before applying sealant or plaster
    – Unusual gaps in stone, brick, concrete or plaster

    Fixing

    – Door frames
    – Timber structures
    – Windowsills and thresholds.
    – Window frames

    Insulation

    – Behind cladding
    – Behind barge boards & soffits

    CHARACTERISTICS

    – A vast degree of fire rating: slows down the passage of smoke & flames
    – Fast setting – can be cut, sawn or plastered in 1 hour.
    – Expands up to 50 times the original can size.
    – Fills unusual and deep gaps where most conventional fillers would fail.
    – Possesses insulating and sound deadening properties

    LIMITATIONS

    – Carefully read instructions and text in warning box before use.
    – Do not over-pressurise container.
    – Always apply above 5°C.

    For all other fire systems on our website, please click here.

    For any further info you may require on Everbuild products, please visit their website here.

  • everbuild-fire-foam-b2

    Everbuild Firefoam B2 Gun Grade

    £5.60

    PRODUCT DESCRIPTION

    Everbuild Firefoam B2 Gun Grade is a quick setting one part polyurethane foam with fire resistance properties. The foam expands on application 1.5 – 2 times the original size and meets all the requirements of DIN 4102 Part 1 & BS476 Part 20 for Construction Materials. Everbuild Firefoam B2 is fire-rated up to 2 hours in specific joint configurations. Once cured, the foam can be sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5oC to +25oC, ideally 20oC.

    USES

    – Filling gaps around pipe entries through fire-rated walls. To provide a fire-rated seal around window and doorframes.
    – Chasing electrical wire prior to plastering, where a fire rating is required.
    – Wide & deep joints prior to applying sealant or plaster.
    – Irregular sized gaps in brick, stone, concrete or plaster.

    Fixing

    – Door frames.
    – Timber structures.
    – Window sills and thresholds.
    – Window frames.

    Insulation

    – Behind cladding.
    – Behind barge boards & soffits.

    CHARACTERISTICS / ADVANTAGES

    – A high level of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades.
    – Fast setting – can be cut, sawn or plastered in 1 hour.
    – Economical – expands up to 50 times the canister size.
    – Fills unusual and broad gaps where most conventional fillers would fail.
    – Possesses insulating and sound deadening properties

    LIMITATIONS

    – Do not over pressurise container.
    – Always apply above 5oC.
    – Clean spills immediately with Everbuild Dual Purpose Foam Cleaner.

    For all other fire systems on our website, please shop here.

    For any further info you require on Everbuild products, please visit their website here.

  • everbuild-fire-foam-hand-held

    Everbuild Firefoam B2 Hand Held

    £5.60

    PRODUCT DESCRIPTION

    Everbuild Firefoam B2 Handheld Fire Foam is a quick setting one part polyurethane foam with fire resistance properties. The foam expands on application 1.5 – 2 times the original size and meets all the requirements of DIN 4102 Part 1 & BS476 Part 20 for Construction Materials. Everbuild Firefoam B2 is fire-rated up to 2 hours in specific joint configurations. Once cured, the foam can be sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5oC to +25oC, ideally 20oC.

    USES

    – Filling gaps around pipe entries through fire-rated walls. To provide a fire-rated seal around window and doorframes.
    – Chasing electrical wire prior to plastering, where a fire rating is required.
    – Wide & deep joints prior to applying sealant or plaster.
    – Irregular sized gaps in brick, stone, concrete or plaster.

    Fixing

    – Door frames.
    – Timber structures.
    – Window sills and thresholds.
    – Window frames.

    Insulation

    – Behind cladding.
    – Behind barge boards & soffits.

    CHARACTERISTICS / ADVANTAGES

    – A high level of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades.
    – Fast setting – can be cut, sawn or plastered in 1 hour.
    – Economical – expands up to 50 times the canister size.
    – Fills unusual and broad gaps where most conventional fillers would fail.
    – Possesses insulating and sound deadening properties

    LIMITATIONS

    – Do not over pressurise container.
    – Always apply above 5oC.
    – Clean spills immediately with Everbuild Dual Purpose Foam Cleaner.

    For all other fire systems on our website, please shop here.

    For any further info you require on Everbuild products, please visit their website here.

  • everbuild-fix-and-fill-foam

    Everbuild Fix and Fill Expanding Foam

    £2.95£4.00

    Everbuild Fix and Fill Expanding Foam is a quick-setting one-part polyurethane foam in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150% its original volume . Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5°C to +30°C, ideally 20°C.

    USES

    Filling

    – Gaps around pipe entries through walls
    – Gaps around window frames, door frames
    – Electrical wire chasing prior to plastering
    – Deep joints prior to applying sealant or plaster
    – Irregular gaps in stone, brick, concrete or plaster

    Fixing

    – Door frames
    – Timber structures
    – Window sills and thresholds
    – Window frames

    Insulating

    – Behind cladding to exterior walls
    – Behind soffit and barge boards

    CHARACTERISTICS / ADVANTAGES

    – Quick setting – can be cut, sawn or plastered in 1 hour.
    – Economical in use – expands up to 55 times its original volume.
    – Fills irregular and broad gaps where most conventional fillers would fail.
    – Possesses insulating and sound deadening properties.

    APPLICATION INSTRUCTIONS

    SUBSTRATE PREPARATION

    Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

    APPLICATION METHOD / TOOLS

    ALWAYS WEAR PROTECTIVE GLOVES.

    Shake can well before use (about 20 times). Carefully fix nozzle. Do not overtighten or force. ALWAYS USE CAN UPSIDE DOWN. Only partially fill cavities as the foam will expand to fill
    the remaining space. Any excess foam can be removed whilst still wet with Everbuild® FOAM CLEANER. Cured foam must be removed mechanically or use FOAM EATER. When used for fixing door frames, supports must be used until the foam is fully cured.

    Please note:

    – When transported in cars, keep upright and secured in boot, out of direct sunlight.
    – When removing cured foam from skin, take care not to damage with abrasives.
    – Grease skin with body lotion or similar.

    IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild® FOAM CLEANER before the foam has cured. Do not push any object into the valve as the contents may explode.

    LIMITATIONS

    – Carefully read instructions and text in warning box before use.
    – Do not over-pressurize container.
    – Always apply above 5°C, ideally 20°C (conditions and product).
    – Clean spills immediately with Everbuild® FOAM CLEANER.
    – When using EVERBUILD® FIX &FILL Expanding Foam, always remove nozzle from can and clean immediately after use with Everbuild® FOAM CLEANER.
    – For fire rated joints, use Everbuild® FIREFOAM B1 in conjunction with Everbuild® FIREMATE®.

    Once cured, dry foam must be removed mechanically or use FOAM EATER (always cut back and use on residues). No solvent will remove the product.

  • illbruck-fm330-box

    illbruck FM330 Pro Foam Air Seal – Box of 12

    £86.76

    illbruck FM330 is one part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, airtightness and acoustic properties. It has excellent adhesion to a full range of building substrates, such as brick, block, plaster, stone and cementitious materials as well as wood & metal.

    Area of application

    illbruck FM330 is ideal for airtight gap filling in general construction joints – including where movement is expected to occur.
    It is suitable for applications such as airtight window and door perimeter joint seals, sealing floor to wall and wall to ceiling joints and pipe & service penetrations.

    Product Benefits

    – A high-performance PU foam with excellent acoustic and airtight performance
    – Airtight formulation – tested to EN 12114
    – Elastic performance – up to 50% movement capability
    – Can still be used at temperatures as low as -3°C
    – Low post-expansion facilitates more accurate application depth

    Application

    – Shake the canister vigorously at 20 times. Remove the protective cap & screw the gun onto the canister.
    – Invert can and direct nozzle into the gap, pressing gently on the trigger to establish the correct flow rate.
    – Underfill joints to allow for post-application expansion of the foam. Fill to approximately 80-90% of the joint depth
    – Applying a light spray of clean water between each layer before application
    – When filling deep joints, apply in layers & wait for each layer to skin and partially cure before applying the next.

    For all other illbruck products on our website, please click here.

    For any further information you require on illbruck products, please visit their website here.

  • soudafoam-750ml

    Soudal Soudafoam Gap Filler 750ml

    £2.75

    DESCRIPTION

    Soudal Soudafoam Gap Filler is an expanding foam filler. Soudal Soudafoam Gap filling formulation with high 3D expansion. Easy to use, one component. Rapid curing. Excellent thermal and acoustic insulation properties. Primerless adhesion on most construction materials. Available in Hand-Held and Genius Gun®, Gun Grade and Click & Fix® versions both come with DuraValave.

    CHARACTERISTICS

    – Polyurethane foam filler
    – Acoustic rating ISO 717-1: 58 dB
    – Thermal conductivity DIN 52612: 37mW/mK
    – Application temperatures: +5C to +30C
    – Hand-Held, Genius Gun®, Gun Grade and Click & Fix® versions.

    PROPERTIES

    – Excellent stability (no shrinkage or post-expansion)
    – High filling capacity
    – Excellent adhesion on all surfaces (except PE, PP and PTFE).
    – High insulation value, thermal and acoustic
    – Excellent bonding properties.

    APPLICATIONS

    General-purpose gap-filling: pipe penetrations, insulation and roofing materials and general construction.

    – Installing of window and door frames.
    – Filling of cavities.
    – Sealing of all openings in roof constructions.
    – Apply of an acoustic baffle
    – Improving thermal isolation in cooling systems.

    SHELF LIFE

    Twelve months unopened and stored in dry and cool conditions, Upright storage is recommended.

    For all other foam systems on our website, please click here.

    For any further info you may need on Soudal products, please visit their website here.

Acoustic Expanding Foam

Acoustic expanding foam is ideal for filling movable joints and large gaps and cavities before painting. The foam is ideally used for fixing loose tiles, boards, and window frames. Sealant Supplies Limited stocks a wide range of acoustic expanding foam from leading brands such as illbruck and Soudal.

Our general-purpose gap filling acoustic expanding foam products are rapid curing and feature acoustic and thermal insulation. These properties make it ideal for pipe penetration, roofing, and general insulations purposes.

Acoustic Expanding Foam Features

Our products feature special trigger mechanisms for high precision reducing the need for additional tools. As it cures, the foam is fully flexible and capable of absorbing movement without risk of cracking.

Sealant Supplies Limited stocks high-quality acoustic expanding foam products that have a long shelf-life and are adhesive to a variety of surfaces including brick, PVC, timber, concrete, cables, insulation materials, metals and pipes among others.

Our range of products remain flexible and re-usable. Our acoustic expanding foams do not affect the materials they are used on and can be plastered, cut, and sanded. For longer life, we recommend covering the foam to protect it from UV rays.

Sealant Supplies Limited range of acoustic expanding foam products are weatherproof and can withstand rain. Reach out to us to find out more about our range of acoustic expanding foams and advice about current products in stock.