Grout & Adhesives
Filter Your Product
-
£40.68 - £74.22 ex. VATKeralastic T is a high performance, two-component, polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Suitable for the interior and exterior bonding of wall and floor ceramic tiles, as well as stone material mosaics, etc. Other substrates include; • screeds, renders, concrete, asphalt, wood, metal, PVC, reinforced polyester, fibre-cement, gypsum, gypsum board, gypsum panels, etc. CHARACTERISTICS Keralastic T is a two-component, solvent and water free adhesives that ar -
£6.25 - £19.80 ex. VATFugolastic main purpose is as a substitute for water to mix the cement based grouts in the Keracolor range. This helps to improve the grout adhesion and mechanical strength, and to reduce the porosity and absorption. CHARACTERISTICS Fugolastic is a water dispersion of synthetic polymers, that when mixed with cement based products for grouting ceramic tiles, enhances them with the following properties: • Improved compactness and greater abrasion resistance. • Optimum hydration of the cement based binder, and improved adhesion to the edge of tiles. • Less poros
-
£3.21 ex. VATEverbuild Lumberjack, 550-floor adhesive is a high spec, hybrid polymer, cartridge or foil pack applied adhesive. It is specially designed for fixing all types of wooden floors directly onto all common building substrates. EVERBUILD® Lumberjack 550 Floor Adhesive has the following benefits: Free of water & active solvents, so will not cause any warpage. It is also a rapid setting & permanently flexible. Can be used with underfloor heating as it has excellent acoustic properties. Characteristics Everbuild Lumberjack is free of water & active solvents, so will
-
£32.02 ex. VATKerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms. TECHNICAL CHARACTERISTICS Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo
-
£2.76 ex. VATEverbuild Timber & Laminate is a sealant and gap filler, designed for sealing around fitted furniture, laminate flooring and kitchen units. It has been formulated using lightfast pigments, offering a range of 4 colours - for a near or exact match to most popular laminate floors and melamine board finishes. Everbuild Timber & Laminate Sealant is a solvent-free silicone and leaves a matt finish, which will not pick up dirt and can be easily cleaned with standard household products. If desired, the product can be painted, varnished or wood stained. Advantages - Permanently fle
-
£7.41 ex. VATKeracolor SF is a super fine, high performance cementitious grout, polymer modified, for joints up to 4 mm. TECHNICAL CHARACTERISTICS Keracolor SF is a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and pigments. Keracolor SF is characterised by its unique rheological behaviour, making it particularly suitable for grouting narrow tile joints. When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the following characteristics: • good compressive and flexural strength and good resistance
-
£37.19 ex. VATKerapoxy Easy Design is a two-component, decorative, epoxy resin-based grout, with silica sand and other special components, with excellent chemical resistance and easy cleaning properties. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. Kerapoxy Easy Design may be mixed with up to 10% by weight of MapeGlitter, metalized coloured glitter, to create particular special effects. The percentage depends on the aesthetical effect and workability desired. MapeGlitter is available in silver and light g
-
£6.51 ex. VATSoudal Metal Fix is a strong construction adhesive with high initial grab (>150kg/m²). Suitable for bonding metal materials; aluminium, iron, lead, zinc, copper and steel to each other and onto all common building materials; concrete, wood, brick, stone and many types of plastic. No preliminary mechanical fixing required due to high grab properties. Contains aluminium particles to give the product a metallic finish. Properties - High initial tack reducing the need for initial support. - Fast curing - Good extrudability - High shear strength after full cure (no p
-
£2.38 ex. VATSoudal Contact Adhesive Spray is a ready to use universal contact adhesive spray suitable for a wide range of substrates and surfaces. Properties - For temporary or permanent bond - Ready to use and very user friendly - Fast drying process. - Good adhesion to many materials - Fast hand tight bond. Substrates Nature: The to be bonded materials should be flat and well fitting as well as clean, dry and free of dust and grease. Surface preparation: No pre-treatment required. Rough grinding of smooth surfaces improve the adhesion. A preliminary adhesion t
-
£3.82 ex. VATEverbuild STICK2 Contact Adhesive may be a premium grade rubber based contact adhesive suitable to be used with a good sort of materials for both professional and DIY use. The product could also be used internally and externally for bonding decorative laminates, all kinds of wood, rigid PVC, ABS, cork, linoleum, rubber, stone, metals and dense fabrics. Product Benefits: - Good adhesion - Fast rate of tack development. - Ease of use no messy spreading. - Time-saving easier and quicker than most trowel spreaders applied adhesives. - The foaming formula gives low soak in into most
-
£9.45 ex. VATC-Tec BT1 White can be used for all applications, including bathrooms, wet rooms, hospitals, clinics and all public health institutions; BT1 replaces Wood and P.U. adhesives, silicone sealants, sanitary silicone sealants, acrylic sealants and butyl rubber sealants. For more in our adhesive range, please click here. For more in our C-Tec range, please click here. For all other information regarding C-Tec, please visit their website here.
-
£2.93 ex. VATSoudal Parquet & Timber Sealant is a high quality water based acrylic polymer. Flexible joint sealant for the sealing joints in parquet or laminate floors. Colour range matched to various wood types. Excellent adhesion onto porous substrates, virtually odourless and free of solvents. Can be painted and varnished after curing. Properties - Solvent-, and silicon free - Paintable - Can be varnished with different kinds of parquet varnish. - Virtually odourless Substrates Substrates: All common timber and laminate floors as well as porous building surfa
Grouts & Adhesives
Builder’s adhesives are a broad range of products used in bonding common building and construction materials. Sealant Supplies Limited stocks a wide variety of builder’s adhesives ideal for each unique project.
We stock quick-dry varieties as well as water and solvent-based builder’s adhesives. SSL collaborates with top brands such as Sika, Everbuild, illbruck, Bond It, Cox, and CM Sealants to bring you wide range of quality builder’s adhesives.
We offer trade accounts to accommodate large orders and help you achieve your construction goals efficiently and effectively. Our catalogue of top-performing adhesives is able to meet a range of requirements within the construction and building sector.
SSL stocks builder’s adhesive in varying strengths to ensure you get the ideal product for your project. Our adhesives also work on multiple materials including wood, metal and PVC among others.
Builders adhesive have several advantages key among them prevention of nail pops. The adhesives also reduce the need for fasteners in your building project which brings down costs while providing a stronger, longer-lasting bond. Building adhesives are also ideal for prevention of wall drafts and improved sound deadening.
For remodelers, choosing a high-quality builders adhesive ensures all-climate workability and prevents creaking when used on floorboards. Climate control builder’s adhesive also assures you of excellent performance at low temperatures without the risk of hardening.
Check out our catalogue of builder’s adhesive products and reach out to us to place an order.
