5kg
-
£7.95 ex. VATEVERBUILD 506 Contractors PVA is a versatile multi-purpose product designed for use as a primer, sealer, cement filler, and plaster admixture. It adheres effectively to most common building and DIY materials (excluding PVC and rubber) and is ideal for priming unsound surfaces, acting as an adhesive for porous materials, sealing dust on flaking paint or walls, and enhancing cement mixes. This product improves both adhesion and flexibility in various applications. Key Points: Acts as a primer for preparing surfaces before plastering or painting. Serves as an adhesi -
£7.34 - £49.16 ex. VATCromar AlphaChem Contractor PVA is a multi‐purpose bonding agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber. Contractor PVA is ideal for priming unsound surfaces before plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture. NOTE – for areas subject to constant damp, use Cromar SBR Bond, which is water resistant. BENEFITS • ImprovSelect options This product has multiple variants. The options may be chosen on the product page
-
£13.13 ex. VATLatexplan Trade is a two-part smoothing compound that comprises a grey powder (PART A) containing special cements, graded silica sands, and additives mixed with a synthetic rubber latex (part B). It can be walked on after approximately 1½ to 2 hours and is ready for flooring installation in about 12 hours, depending on thickness and ambient temperature. With a very low odour, it is suitable for use in confined spaces where work or occupancy must continue. Latexplan Trade is also compatible with Mapeproof ESM surface membranes, making it suitable for areas with residual or static moi
-
£5.64 - £45.16 ex. VATSoudal Floor Covering Adhesive is a solvent free adhesive paste for bonding floor covering onto porous surfaces such as stone, concrete, plaster or wood. Properties - Easy to tool - Professional quality - High adhesive strength - Long open time - Elastic adhesive layer Substrates Substrates: porous substrates like concrete and wood Nature: Floor Covering Adhesive should be applied on a rigid, clean, permanently dry, dust and grease free surface which do not contain any loose parts, paint, wax, oil or other contaminants. Irregularities such as remaininSelect options This product has multiple variants. The options may be chosen on the product page
-
£26.48 - £119.89 ex. VATBond It Floorbond CCT - A solvent-free acrylic emulsion that creates a permanently tacky film that allows for the removable fixing of "loose lay" carpet tiles, making it easy to lift and replace tiles when needed. It is non-staining, resistant to plasticiser migration, and can be applied using a roller or brush. Ideal for tiles with PVC, PVC/Glass fibre, Bitumen/Felt, non-woven fabric, and other polymer backings such as polyurethane and Hessian, it works well on substrates like concrete, cementitious screeds, chipboard, hardwood, plywood, smoothing compounds, and metal access floor pSelect options This product has multiple variants. The options may be chosen on the product page
-
£4.04 - £33.07 ex. VATSoudal tile Adhesive is a solvent free flexible adhesive paste suitable for the bonding of all types of wall and floor tiles even in applications with underfloor heating. Suitable for applications onto porous surfaces such as stone, concrete, cementitious surfaces, plaster, timber. Properties - paste ready for use - Easy to tool - Long open time - Low consumption - Flexible - Water resistant - High initial tack Substrates Substrates: all usual porous building substrates, brick, stone, concrete, stucco, wood. Nature: clean, dry, free of dust and greaSelect options This product has multiple variants. The options may be chosen on the product page
-
£9.88 - £47.80 ex. VATRapid-setting, rapid-hardening, and highly flexible cementitious this tile grout is ideal for walls and floors, offering superior water and frost resistance along with built-in Microban® antimicrobial protection to prevent mould and mildew growthSelect options This product has multiple variants. The options may be chosen on the product page
-
£7.07 ex. VATBond It Rapid Setting Water Plug is a cement-based, fast-curing, watertight compound designed to plug running water leaks and seal cracks and joints before applying Bond It Tanking Slurry (BDH107). It cures in less than 2 minutes, forming a strong, watertight barrier that can also be used to anchor fixings. To use, cut the holes or cracks into a square shape, mix the compound with water to form a putty, then apply it by hand or with a trowel, pressing it firmly into place until it sets. Once the water stops running, trim the plug flush if needed. Key Points: Seals and f
-
£10.68 - £20.46 ex. VATBAL Grout Wide Joint is a highly flexible, polymer-modified grout with built-in admixture, designed for joints ranging from 3mm to 20mm. It is water- and frost-resistant and sets in approximately 24 hours at 20°C. Suitable for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble, and natural stone, it can be used in both dry and wet interior and exterior environments. BAL Grout Wide Joint is ideal for swimming pools (hard water), areas with limited movement including overlaid plywood floors (minimum 15mm), and heated screeds, following BS Standards for jointSelect options This product has multiple variants. The options may be chosen on the product page
-
£43.72 - £77.56 ex. VATUltrabond Eco PU 2K is a two-component, solvent-free, elastic, and waterproof adhesive made from a polyurethane base (component A) and a special catalyst (component B), designed for use in the construction industry. It boasts a very low emission level of volatile organic compounds (EMICODE EC1 Plus). When the components are mixed, they create a paste that is highly workable and provides excellent durability and resistance to aging. This adhesive offers perfect adhesion to various substrates, hardens through a chemical reaction without shrinking, and forms a strong, tough bond. Its hiSelect options This product has multiple variants. The options may be chosen on the product page
-
£42.66 ex. VATTriblock P is a three-component epoxy-cementitious system designed to adhere to damp surfaces, including smooth materials like ceramic tiles, porcelain, and marble. This product creates a durable layer suitable for various floor coverings, such as parquet, PVC, linoleum, ceramic, epoxy, polyurethane, and cementitious smoothing layers. Manufactured using a formula developed in MAPEI’s research laboratories, Triblock P can be applied directly or diluted with water. Additionally, by incorporating 0.25 or 0.5 Quartz sand, it can be transformed into a smoothing mortar ideal for uneven c
-
£54.15 ex. VATARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
