Total: £0

toly (Price shown excludes VAT)

01708 525 866

Total: £0

toly (Price shown excludes VAT)

sl

  • Sikaflex PRO3 Self Levelling 600ml – Box of 20

    £196.20

    Sikaflex PRO-3 SL is a one-part, moisture curing, self-levelling elastic joint sealant with high mechanical resistance for the following indoor and outdoor applications:

    Uses

    ■ Connection & movement joints
    ■ Pedestrian and traffic areas
    ■ Warehouses
    ■ Ceramic tiles, such as those found in public buildings etc.
    ■ Floor joints in tunnel construction

    Characteristics / Advantages

    ■ Movement capability of 25% (ISO 9047)
    ■ Bubble-free curing
    ■ Self-levelling
    ■ Excellent adhesion to most construction materials
    ■ Solvent-free and odourless
    ■ Very low emission

    Application Method / Tools

    Sikafle PRO-3 SL is supplied ready to use. After suitable substrate preparation, insert a backing rod to the desired depth & apply a primer if necessary. Insert 600ml foil pack into appropriate barrel gun and apply Sikaflex PRO-3 SL into the joint, taking care to make sure that it is in full contact with the edges of the joint and be sure to avoid any air entrapment. Masking tape can be used when neater joints are required. Remove the tape within the recommended skin time.

    Surface Preparation

    Sikaflex PRO-3 SL has strong adhesion without primers/activators to most dry, clean and sound substrates. For optimum adhesion in high-performance applications such as multi-story building work, high-stress areas, extreme weather conditions or continued water immersion, the following procedure shall be followed:

    Non-porous substrates:

    Aluminium, anodised aluminium, stainless steel, galvanised steel, powder-coated metals & glazed tiles have to be thoroughly cleaned and treated with Sika Aktivator-205. Before sealing, allow a flash-off time of at least 15 minutes & no longer than 6 hours.

    Metals like brass, copper, titanium-zinc etc. will have to be cleaned and pre-treated with Sika Aktivator-205. After a flash-off time of at least 15 minutes & then apply Sika Primer-3N by using a brush and allow a flash-off time of at least 30 minutes, with a maximum of 8 hours before sealing.

    PVC has to be cleaned and after that, treated with Sika Primer-215 by using a brush. Before sealing, allow a flash-off time of at least 30 minutes & no longer than 8 hours.

    Porous surfaces

    Porous surfaces have to be primed with Sika Primer-3 N using a brush. Before sealing, allow a flash-off time of at least 30 minutes & a maximum of 8 hours.

    For more detailed instructions, please read the Product Data Sheet for pre-treatments or alternatively, contact our Technical Department. Primers are used as adhesion promoters. They do not replace the correct cleaning of the surface nor do they improve its strength significantly.

    For all other Sika products on our website, please click here.

    For any further information, you may need, please visit the Sika website.

  • ARBO Arbothane 1245 Self Levelling Grey 600ml – Box of 20

    £130.00

     

    Arbothane 1245SL is a one-part self-levelling Polyurethane Sealant that cures on exposure to moisture vapour to form a tough but flexible rubber. Arbothane 1245SL has good adhesion to concrete, brickwork, metals and many other common construction substrates. 

     

    For more information on Arbo, please visit their website here.

    For more in our range of sealants, please click here. For application guns to use with this product, please click here.