- Product ID: BDMI
- Suitable For: bonding fine joints such as mitres where a close aesthetically pleasing joint is required
- Area of use: INT & EXT
- Time to full cure: approx. 10 seconds
- Volume: 200ml Activator 50g HVC Superglue
- Container Type: spray can bottle
- Type: adhesive
- Colour: clear
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It’s Mitre Kit is a high strength bonding system comprising a cyanoacrylate adhesive with an aerosol activator to ensure full and rapid curing on acid surfaces. Can be used for bonding MDF, wood, rubber and most plastics. Instant bonding properties considerably reduce assembly times for mitre joints especially where precision instant bonding is required. Cures in approximately 10 seconds. Pack includes 1 tin of Activator (200ml) and 1 bottle of HVC Superglue (50g).
Ideal for bonding:
– MDF chipboard
– oak
– pine
– all common timbers
– PVCu
– rubber
For more in our range of glues and adhesives, please click here. Or to shop our range of Bond It products, click here.
To visit Bond It’s website, please click here.
The Bond It Mitre Kit can be used in conjunction an almost instant bond is attained. Ideal for fine joints such as mitres where a close aesthetically pleasing joint is required.
Can be used for bonding:
u MDF chipboard
u oak
u pine
u all common timbers
u PVCu
u rubber
APPLICATION
Spray aerosol lightly over one face of the joint and allow to dry. If possible, use on the least visible face of the completed joint. Apply adhesive to the other face and bring together immediately. Apply gentle pressure.
IMPORTANT: Can be used on uPVC but over application of the accelerator can result in staining. This stain may not become visible for several hours after application. Apply to a test sample
to check application level to avoid any staining on final job.
LIMITATIONS
Not suitable for permanent glass bonding. Oily or greasy surfaces cannot be bonded. Olefinic or fluro polymers may require specialised bonding techniques.
4 reviews for Bond It Glue Monster – Mitre Kit Adhesive
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Mark Mcmahon (verified owner) –
H Brown (verified owner) –
very good
jason downs (verified owner) –
amazing service and look forward to using again.
Stuart Currier (verified owner) –
Very reasonable priced and not a bad product