Product Description:
FireFoam B1 Hand Held is a quick-setting, fire-rated, one-part polyurethane foam. It expands on application to yield up to 50 times the can content and meets the extremely stringent requirements of the test criteria DIN 4102 Part 1 for Construction Materials; Class B1 and BS 476 Part 20. Once cured, FireFoam B1 can be cut, sawn or plastered over after only one hour.
Advantages
– A high degree of fire rating: slows down the passage of flames and smoke.
– High-speed setting – can be sawn or plastered within 1 hour.
– Expands up to 50 times in size
– Fills irregular and vast voids, where most fillers or foams would fail.
– Possesses insulating and sound deadening properties.
For more in our range of Everbuild products, please click here. Or for all other foams on our site, please click here.
For any further information on Everbuild’s products, please visit their website here.
FILLING
– Electrical wire chasing before plastering, where a fire rating is required.
– Deep joints before applying sealant or plaster
FIXING
– Door frames
– Timber structures
– Windowsills and thresholds.
– Window frames
– Insulating
– Behind cladding to exterior walls.
– Behind soffit and barge boards
APPLICATION
LIMITATIONS
– Do not over-pressurise container.
– Always apply above 5°C.
– Clean spills immediately with Everbuild Foam Cleaner
Please note:
When transported in cars, keep in the boot, out of direct sunlight. When removing cured foam from the skin, take care not to damage with abrasives. Grease skin with body lotion or similar.
Reviews
There are no reviews yet.