Product Description:
Fosroc Colpor 200PF is a two-part polyurethane sealant that is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Fosroc Colpor is resistant to oil and hydraulic fluid spillage. It will not harden in cold weather nor become excessively soft or pick up in hot conditions. Furthermore, Colpor 200PF has high durability and long service life which reduces maintenance costs.
ADVANTAGES
– Cold applied – no heating required
– Fuel, oil and hydraulic fluid resistant
– Self-levelling
– Tough, rubbery seal
– High performance – less maintenance
For all other Fosroc products on our website, please click here.
For any further information on Fosroc products, please visit their website here.
For the horizontal sealing and maintenance of joints in concrete roads, runways and hard standings. The excellent fuel resistance of Colpor 200 makes it particularly suitable for sealing areas where fuel and oil spillage might occur, such as:
– Aircraft fuelling areas
– Oil terminals
– Garage forecourts
– Parking and cargo areas
– Docks and harbours
– Warehouses
MIXING
Drain the curing agent into the large base tin. Always use a handheld, slow speed drill (400 to 500 rpm) fitted with a Fosroc paddle blade
stirrer. Mix for approximately one minute, stop the mixer and scrape around the top of the tin to remove any remaining curing agent. Continue mixing for a further 3- 4 minutes until the material is mixed thoroughly.
APPLICATION
When mixed, the sealant may be loaded into a 600ml barrel gun after removing the nozzle and cap then pulling back the plunger rod. Apply the material directly into the joint, making sure the top of the sealant is recessed below the concrete edge & not level.
Matthew Lewis (verified owner) –