BAL Level Out Grey 25kg
£35.82 inc. VAT
£29.85 ex. VAT
- Product ID: 40325
- Area of use: EXT
- Application Method: Steel Trowel / Float
- Time to full cure: walkable after 2 hours and ready for tiling after 3 hours at 20°C
- Volume: 25kg
- Type: Levelling Compound
- Colour: Grey
- Brand: BAL
- Manufactuer: BAL
- Box Size: 1
BAL Level Out is a high-performance, fast-setting external leveller designed to smooth rough or impact-damaged concrete bases prior to tiling. Easy to use and free-flowing, it can be applied from 2mm to 20mm in a single application and is walkable after just 2 hours and ready for tiling after 3 hours at 20°C. With a 30-minute pot life, reduced water option for gradient levelling, and excellent water and frost resistance, BAL Level Out provides a durable and reliable solution for external levelling projects.
Key Points
– Fast-setting external leveller for concrete bases
– Apply from 2–20mm in a single pour
– Walkable after 2 hours; tile after 3 hours (20°C)
– Water and frost resistant with a 30-minute pot life
Note: the thickness of combined layers should not exceed 20mm.
SHELF LIFE
12 months under normal dry conditions. Protect from frost and damp.
For more in our range of levelling compounds, please click here. For our full range of products from BAL, please click here.
For more information on BAL and their products, you can visit their website here.
Use For:
– Preparing backgrounds suitable for external tiling
– Levelling uneven concrete substrates
– Bed depths from 2mm up to 20mm
– Dry or wet environments, including total immersion in pools
– Domestic or commercial installations
Can receive ceramic or natural stone tiles after 3 hours at 20°C (longer drying required for greater depths or lower temperatures)
Note: Direct-to-earth subfloors should incorporate an effective damp proof membrane
Not Suitable For:
– Use as a wearing screed
– Levelling sloped backgrounds where falls are intentionally designed to divert water to a primary drainage point. Any substrate laid to falls should maintain the correct slope for effective drainage
SURFACE PREPARATION
General
– Ensure all concrete surfaces are dry, sound, and free from grease, dust, or any other contaminants that could hinder adhesion. Direct-to-earth subfloors must include an effective damp proof membrane.
Concrete
– Concrete must be fully cured and free from efflorescence, laitance, dirt, polished surfaces, or other loose materials. Remove unwanted material using appropriate mechanical methods. Some exposed aggregate should remain visible but not loose.
Minimum drying times:
Concrete: 6 weeks
– Thoroughly dampen the substrate with water before applying BAL Level Out, taking care to avoid pools of standing water. Any structural movement or live joints in the substrate must be reflected through BAL Level Out to the surface.
MIXING
1. Mix one 25kg bag of BAL Level Out with approximately 5.25 litres of clean water until a smooth, lump-free mortar is achieved. Reduce the water content if gradient levelling is required. For pumping, use continuous pumps with a capacity of 20–40 litres per minute. Do not add excess water, as this will weaken the set mortar.
2. A mixing paddle on a slow-speed (600–1000 rpm) electric drill makes mixing easier. BAL Level Out should be applied within 30 minutes at 20°C; working time decreases at higher temperatures and increases at lower temperatures.
25kg bag: approx. 5.25 litres of clean cold water
APPLICATION
1. Pour the mixed BAL Level Out onto the prepared substrate. The mortar will self-smooth and flow during the first 10 minutes of its 30-minute working time. Spread using a steel trowel or float. For large areas, a gauging tool with height adjustment is recommended, and a long-handled smoothing trowel can simplify finishing.
2. The surface can be left with a trowelled finish. Protect the freshly applied BAL Level Out from adverse conditions such as rapid drying, direct sunlight, rain, or frost until fully hardened. Apply only at temperatures above 5°C.
3. If a second layer is required, wait until the first layer has fully hardened. Machine-sand the first layer (paper 16–36), clean it, and dampen it before applying the next coat.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.