Bond It PC500 RADLEAK 1L
£7.98 inc. VAT
£6.65 ex. VAT
- Product ID: bdpc500
- Area of use: Central heating system
- Volume: 1L
- Container Type: Plastic bottle
- Type: Sealer
- Colour: Opaque
- Brand: Bond It
- Manufactuer: Bond It
Bond It PC500 RADLEAK is designed to seal inaccessible leaks and weeping joints in sealed systems. Its use can help prevent costly repairs and will not block pumps, valves, or air vents.
Shelf Life
36 months from date of manufacture when stored in original, sealed containers.
Storage Conditions
Store in cool, dry conditions in tightly sealed container. Do not allow to freeze.
For our full range of products from Bond It, please click here.
For more information on Bond It and their products, you can visit their website here
PC500 Radleak can be used to seal inaccessible leaks and weeping joints in sealed systems
Application
Shake the bottle of PC500 RADLEAK well before use and add the entire contents via the feed and expansion tank. Tie up the ball valve in the feed and expansion tank. Turn off the boiler and locate the drain cock. Attach a hose and remove approximately 10 litres of system water, then close the drain cock. Pour RADLEAK into the header tank, untie the ball valve, and turn the boiler back on. Vent the system as needed to remove any trapped air. A soft seal will form within 24 hours without causing blockages, with full effect achieved within 1–6 weeks.
Note: Do not mix RADLEAK with other concentrated chemicals. It can be added to previously treated systems if administered separately.
Limitations
Do not add to PRIMATIC systems.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.