SIKA Dustproofer & Concrete Hardener
£11.14 inc. VAT
£9.28 ex. VAT
- Product ID: 102470
- Area of use: EXT & INT
- Application Method: brush or spray
- Volume: 5L
- Container Type: jerry can
- Colour: clear
- Brand: sika
- Manufactuer: sika
Sika® Dustproofer & Concrete Hardener is a silicate resin-based treatment designed to harden and dustproof both new and existing concrete floors for internal and external use. It reacts chemically with the lime content in concrete to create a durable surface that resists wear, efflorescence, and surface degradation, while leaving a clear, residual finish that helps prevent further dusting.
Key Points:
– Suitable for internal and external concrete surfaces
– Fast-acting formula that hardens and dustproofs concrete
– Helps prevent wear, bloom, and efflorescence
– Dries clear and allows easy water clean-up
Shelf Life – 24 months from date of manufacture
Storage Conditions – Store at +5 to +25 °C in cool dry conditions away from direct sunlight. Store away from children. Protect from frost.
For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
Suitable for:
– Concrete floors
– Cement based floors.
– Screeds & paving.
– Garages, utility rooms, driveways
LIMITATIONS
– For use only on cement-containing surfaces.
– Will not restore severely disintegrated concrete.
– Carry out all necessary repairs before application.
– Do not apply to concrete less than 28 days old.
– Treated surfaces should not be painted.
– Always wash down the surface after application to remove any unreacted material.
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
– Stir thoroughly before use.
– Remove all debris, dust, dirt, and surface growth from the area to be treated.
– Remove damaged material and repair any defects before application.
APPLICATION
1. Apply by brush or spray at a coverage rate of approximately 1 litre per 5 m².
2. Work the product thoroughly into the surface.
3. Apply a second coat after 24 hours.
4. Allow the second coat to dry for 24 hours, then rinse the entire area with clean cold water to remove any surplus unreacted material.
5. Additional coats may be applied to highly porous or excessively dusty floors.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.54 inc. VAT
£2.95 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.19 inc. VAT
£2.66 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.