SIKA Maxmix Plasticiser 1L
£5.18 inc. VAT
£4.32 ex. VAT
- Product ID: 170376
- Suitable For: pointing mortars, renders, screeds, bricklaying mortars
- Area of use: EXT
- Volume: 1L
- Container Type: plastic bottle
- Colour: dark brown
- Brand: sika
- Manufactuer: sika
Data Sheets
Sika MaxMix® Mortar Plasticiser is a concentrated liquid air-entraining agent designed to improve the workability of bricklaying mortars, renders, pointing, and screeds. Suitable for a wide range of applications where enhanced mortar handling is required, its superior plasticising action creates smoother, easier-to-work mixes while reducing the amount needed on site. The easy-to-use gauged bottle provides efficient dosing, with 1 litre treating up to 5 tons of cement and delivering the equivalent performance of 25 litres of standard mortar plasticiser.
Key Points:
– Improves workability of mortars, renders, screeds, and pointing mixes
– Superior plasticising and air-entraining performance
– Concentrated formula: 1 L equals 25 L of standard mortar plasticiser
– Easy-to-use gauged bottle, treating up to 5 tons of cement
Shelf Life – 24 months from date of manufacture in unopened containers.
Storage Conditions – Store in original unopened containers between 5 and 30°C.
For more in our range of mortar products, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here.
Suitable for:
– Pointing mortars
– Renders
– Screeds
– Bricklaying mortars
APPLICATION METHOD / TOOLS
1. Shake the bottle thoroughly before use.
2. To open, press the cap down and twist anti-clockwise.
3. Squeeze the bottle to fill the measuring chamber to the required dosage rate of 5–10 ml per 50 kg of cement.
4. Add Sika MaxMix® Mortar Plasticiser to a bucket containing up to 10 litres of water and mix thoroughly.
5. Dry mix all other ingredients first, then add the water/plasticiser solution gradually until the desired consistency is achieved.
6. Never add the product directly to the dry mix; always dilute in gauging water before use.
7. Replace the cap securely after use.
LIMITATIONS
– Do not use in structural concrete applications.
– Do not exceed the recommended dosage rates.
– Not suitable for use in lime-based mixes.
– Do not mix with other additives in the same gauging water.
– The user is responsible for determining suitability for the intended application. If unsure, contact Technical Services for further advice.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
From: £7.48 inc. VAT
£6.23 ex. VATGeocel 945 is a high modulus MS Polymer for building and civil engineering structures. BENEFITS - Geocel 945 is Fast cure. - Resistant to aerobic and anaerobic bacteriological attack - Excellent application characteristics. Geocel 945 is easy to tool product. PRINCIPAL APPLICATIONS For sealing movement joints to: - Building substructures - Culvert and bridge assemblies - Concrete road soak away channels - Concrete floor slabs (Saw cuts) - Expansion joints in water retaining structures - Sealing of stadia terrace movement joints SURFACE PREPARATION The sealing slot should be acSelect options This product has multiple variants. The options may be chosen on the product page -
From: £4.50 inc. VAT
£3.75 ex. VATAlphaChem Accelerator, Frostproofer & Hardener is a heat‐generating accelerator for cement-based mixes. Its principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures. AlphaChem Accelerator, Frostproofer & Hardener is based on calcium chloride and surfactants and is therefore not suitable for use in structures that are reinforced with steel. Neither should it be used in mortar in contact withSelect options This product has multiple variants. The options may be chosen on the product page -
From: £4.68 inc. VAT
£3.90 ex. VATSoudal Soudaflex 40FC is a high-quality polyurethane sealant and adhesive perfect for a vast number of applications. It is ideal for bonding and sealing panels. It is also a high-quality joint sealant, being used in road and bridge building, as well as industrial flooring applications. Colours: White, Black and Concrete Grey - Sealant and adhesive - High modulus, polyurethane formula - Specifically formulated for concrete applications - Structural bonding of joints subject to vibration - Adheres to most common construction substrates - Chemical resistant - Durable, long-lSelect options This product has multiple variants. The options may be chosen on the product page -
From: £73.92 inc. VAT
£61.60 ex. VATCM200 PF Fast Cure is a two-part sealant that is used for several sealing areas. Most commonly used for sealing expansion joints, due to the advantages of the CM 200 PF is can be used for sealing expansion joints in concrete paved areas, docks, container depots, industrial factories, warehousing petrol forecourts. CM200 PF can be cold applied, so ideal for small works, such as remedial re-sealing of joints. Advantages High-performance good movement accommodation, tolerant of severe climatic conditions. Chemical Resistant to spillages of fuels, hydraulic fluids, syntheticSelect options This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.54 inc. VAT
£2.95 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.19 inc. VAT
£2.66 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.