Sika Lumberjack Woodworm Killer
£23.05 inc. VAT
£19.21 ex. VAT
- Product ID: 483790
- Area of use: INT
- Application Method: brush, spray or dipping
- Volume: 5L
- Container Type: TIN
- Colour: clear
- Brand: sika
- Manufactuer: sika
EVERBUILD® Lumberjack® Woodworm Killer is a ready-to-use wood treatment designed to eradicate all types and life stages of wood-boring insects, including woodworm and their larvae. Its advanced insecticidal formulation penetrates deep into the timber, actively killing infestations while providing long-lasting protection against re-infestation. The fast-drying formula requires no dilution and can be overpainted once dry, making it ideal for both remedial and preventative wood treatment applications.
Key Points:
– Kills all types of wood-boring insects and their larvae.
– Deep-penetrating formula provides long-lasting protection.
– Ready to use with no dilution required.
– Fast drying and can be overpainted after application.
Shelf Life- Use within 2 years of manufacture.
Storage Conditions – Store between 5 and 25°C in original containers away from children.
For more in our range of treatments, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
– Suitable for most internal furniture, woodwork, and joinery.
– Ideal for doors, window frames, roof timbers, floorboards, joists, and rafters.
– Can be overpainted, stained, varnished, or polished once dry.
– Designed for internal use only.
SUBSTRATE QUALITY / PRE-TREATMENT
– Ensure all timber surfaces are clean and free from dust, dirt, paint, varnish, or other surface coatings before application.
– Remove any severely infested, damaged, or structurally unsound timber and replace it with sound timber prior to treatment.
APPLICATION
– Read all statutory conditions and safety information before use. Shake the container thoroughly before application.
– Apply the product by brush, spray, or dipping. When brushing or spraying, apply a minimum of two coats. The second coat should be applied after the first has been absorbed but before it has fully dried.
– Pay particular attention to end grain areas, ensuring they are thoroughly saturated. For maximum protection, dip or flood the end grains wherever possible.
Note: The product appears milky when applied but dries clear.
Coverage and Drying Time
– Apply 2 coats at a coverage rate of approximately 1 litre per 3–4 m².
– Drying time is approximately 1 hour, depending on temperature and conditions.
– End grains should be dipped for a minimum of 3 minutes, or thoroughly flooded where dipping is not practical.
CLEANING OF TOOLS
– Remove excess product from brushes or spray equipment immediately after use and clean thoroughly with warm, soapy water.
LIMITATIONS
– Ready to use – do not dilute.
– For internal use only.
– Do not use in food preparation or food storage areas.
– The user is responsible for determining the suitability of the product for the intended application. If in doubt, contact the Technical Services Department for advice.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.90 inc. VAT
£3.25 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£11.52 inc. VAT
£9.60 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.