Ultracolor Plus forms a mortar with the following characteristics:
- water-repellent and droplet-effect
- colours resistant to ultra-violet rays and atmospheric agents
- ready for light foot traffic after a short period of time
- After that is shrinkage compensated, therefore free from cracks
Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3.
To calculate quantities, please use the Mapei grout calculator here
Mapei Ultracolor Plus Tile Grout is a quick-setting and drying tile grout for grouting joints from 2 to 20 mm wide. Comes in 2kg and 5kg bags, the 5kg bag can be found here.
TECHNICAL CHARACTERISTICS
Ultracolor Plus creates a grouting mortar with the following features:
- Water-repellent and droplet-effect
- Colours resistant to ultra-violet rays and atmospheric agents
- After roughly 3 hours, ready for light foot traffic.
- After that is shrinkage compensated, therefore free from cracks
Therefore it has optimum resistance to abrasion, compression and flexural strength, even
CM Bath & Kitchen is a high modulus silicone sealant that cures rapidly once exposed to natural humidity. Once cured, CM Bath & Kitchens forms to create a permanently flexible, durable weathertight sealant. Along with the flexibility, the sealant operates within a large temperature range with excellent weathering. CM Bath & Kitchen is a premium silicone sealant product, used for exceptional finishes.
CM Bath & Kitchen meets the standards to BS5889 (1989) Type B and US Fed Spec TTS 001543A (Class A) and TTS 00230C (Class A) and ISO 11600 F&G -25HM 846 food safe.
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
– Excellent mechanical and chemical resistance, therefore excellent durability.
– A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
– Easy workability and finishing.
– Becomes ve
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
- Excellent mechanical and chemical resistance, therefore excellent durability.
- A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
- Easy workability and finishing.
- Becomes very hard an
Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm.
TECHNICAL CHARACTERISTICS
Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned.
The following features are obta
Kerapoxy Easy Design is a two-component, decorative, epoxy resin-based grout, with silica sand and other special components, with excellent chemical resistance and easy cleaning properties. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. Kerapoxy Easy Design may be mixed with up to 10% by weight of MapeGlitter, metalized coloured glitter, to create particular special effects. The percentage depends on the aesthetical effect and workability desired. MapeGlitter is available in silver and light g
FA880 is a one component, low slump silicone completely free of any ingredients likely to cause migratory staining to natural stone. It is neutral curing for safe sealing of stonework and has a matt finish. Contains fungicide. FA880 is classified according to EN15651 for use in cold climates.
Perfect for use on swimming pool surrounds. Can be used in submerged projects with the use of a primer.
For all other Illbruck products on our website, please click here. For more in our range of DIY sealants, please click here.
For anything more you may need on Illbruck products, please visit t
Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface.
The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood.
It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement.
Performs w
Elastic single-component silicone sealant for indoor and outdoor use in contact to marble and natural stone, with 25% maximum movement tolerance. Neutral curing
2 Week Delivery Time.
Special properties
elastic silicone-based sealant
no plasticizer migration on absorbent substrates
optimized tooling properties
low odour formulation
ageing and weather-resistant, good UV resistance
compatible with paints
good adhesion also on metals, compatible with copper
with fungicide
For more in our sealant range, please click here.
For application guns to
£11.98 - £22.63 ex. VATUltracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. To calculate quantities, please use the Mapei grout calculator here
