Soudal Metal Fix is a strong construction adhesive with high initial grab (>150kg/m²). Suitable for bonding metal materials; aluminium, iron, lead, zinc, copper and steel to each other and onto all common building materials; concrete, wood, brick, stone and many types of plastic. No preliminary mechanical fixing required due to high grab properties. Contains aluminium particles to give the product a metallic finish.
Properties
- High initial tack reducing the need for initial support.
- Fast curing
- Good extrudability
- High shear strength after full cure (no p
Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application.
Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.
Features & Benefits:
- Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather
- Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving
- GEO‐FIX All Weather is unaffected by w
Liquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Cromar AlphaChem Mortar Stain Remover is a rapid, concentrated hydrochloric acid‐based formula for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence. Preparation and
For more information on Cromer, please visit their website here.
For other concrete related products, click here. For primers and cleaners, please click here.
Everbuild Tecnic Hybriflex SMP is a solvent-free sealant, combining the best qualities of silicone and polyurethane technologies. In other words, specially designed as a multi-purpose floor, and wall grade for all concrete saw cuts and cladding.
Advantages
- Excellent trafficking resistance
- Good slump resistance, therefore it is suitable for full joint applications (up to 65mm)
- Abrasion-resistant
- Excellent resistance to chemicals & petrol, for instance, 10% dilute acids, alkalis & most solvents.
- Overpaintable with most paints
For further informa
Sikaflex PRO-3 Purform Self Levelling is a one-part, moisture curing, self-levelling elastic joint sealant with high mechanical resistance for the following indoor and outdoor applications:
Characteristics / Advantages
■ Movement capability of 25% (ISO 9047)
■ Bubble-free curing
■ Self-levelling
■ Excellent adhesion to most construction materials
■ Solvent-free and odourless
■ Very low emission
Please note, PRO-3 Purform is a new formula introduced 2022
For all other Sika products on our website, please click here.
For any further informati
Latex Plus is a latex admixture for use with NIVORAPID and PLANIPATCH. When mixed together it provides fast-setting levelling/smoothing compounds, with high flexibility for interior surfaces.
CHARACTERISTICS
Latex Plus is a water dispersion of a highly flexible polymer with low viscosity. Mix with Keraquick S1 or Nivorapid in order to improve their deformability, thus improving their application and performance characteristics.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. F
Bond It Drive Alive Patio Seal is a premium grade, solvent-free solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages and dirt and grime build-up. To enhance the present colour and significantly extend the lifespan of block paving driveways or paths and patios.
Facilitates easy cleaning
Solvent-free formulation - Low odour
Improves water resistance and UV resistance
Retards mould growth.
For more in our range of cleaners, please click here. For our range of tools, please click here.
F
Bond It Trowel Mastic can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound.
Storage Life
Minimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use.
For all other Bond-it
The Concrete Hardener hardens and seals the surface of concrete floors and provides a dustproof dressing that gives increased floor life.
For more information on Cromer, please visit their website here.
To shop the 5 litre bottle, please click here. Alternatively shop or full range of sealants here.
Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.
To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top.
Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
MapeWall GPR is a general purpose render for internal and external use. A grey powder basecoat render for masonry and blockwork, composed of cement, selected aggregates and special synthetic resins, which when mixed with water provides a render that is easy to apply on suitably prepared masonry substrates. This product can be applied by hand or with a rendering spray machine.
Mapetherm Net is great for reinforcing renders as a secondary layer. On top of this you can then add the Silancolor Render System.
Mapewall GPR is ideal for use on brickwork or masonr
£6.51 ex. VATSoudal Metal Fix is a strong construction adhesive with high initial grab (>150kg/m²). Suitable for bonding metal materials; aluminium, iron, lead, zinc, copper and steel to each other and onto all common building materials; concrete, wood, brick, stone and many types of plastic. No preliminary mechanical fixing required due to high grab properties. Contains aluminium particles to give the product a metallic finish. Properties - High initial tack reducing the need for initial support. - Fast curing - Good extrudability - High shear strength after full cure (no p
