Silirub 2 is a PREMIUM QUALITY low modulus neutral cure silicone sealant. Very fast skinning time and final cure. 100% silicone, no shrinkage. Thick-bodied. Excellent toolability. Primerless adhesion on all common construction materials (glass, plastics, masonry substrates, metals and wood). High movement capability. Resistant to UV, rain, snow . High and low temperature resistance.
FEATURES & BENEFITS
- Low modulus neutral cure silicone
- 100% silicone
- Primerless adhesion on most surfaces
- Independantly tested to ISO 11600 F&G 25 LM
- Extensive colour range, including RAL
Select options
This product has multiple variants. The options may be chosen on the product page
Soudal Soudaseal 215LM is a 1-component, moisture-curing, low-modulus elastic joint sealant. Soudaseal 215LM is designed for the elastic joint sealing and waterproofing of movement and connection joints in buildings. Due to its very low modulus, it is also suitable for EIFS Facades.
CHARACTERISTICS
– Tested and conform to ISO 11600-F-25LM
– High bond strength on nearly all surfaces
– Excellent adhesion and extrudability, even in adverse conditions
– High-performance mechanical properties
– Almost odourless
– No bubble formation within sealant, even in wet
Select options
This product has multiple variants. The options may be chosen on the product page
EVERBUILD OPTI-MIX MORTAR PLASTICISER is a highly concentrated air-entraining liquid admixture, 25 times stronger than conventional products. It forms stable air bubbles in mortar mixes, improving workability by giving the mortar a "buttery" consistency. This helps prevent shrinkage, cracking, crazing, and mild frost damage during curing, while also providing long-term freeze/thaw resistance. Additionally, it replaces lime in the mix, reducing the chance of efflorescence and smoothing out variations between batches of sand and cement. Its concentrated formula means 1 litre is equival
Bond It Rubber Bitumen Emulsion is a solvent-free, rubberised bitumen emulsion which dries to a tough, black coating providing a highly effective cold-applied, damp-proof membrane in sandwich constructions. It can also be used as a waterproof for floors, walls and other above ground structures and acts as a curing membrane when applied to green concrete. It is equally effective as an adhesive for wood blocks, wood mosaic panels, insulation boards, expanded polystyrene and cork panels, or as a plaster bonding agent on difficult surfaces. It can also be applied to damp surfaces. Resist
Select options
This product has multiple variants. The options may be chosen on the product page
EVERBUILD 201 Mortar Admix is a liquid-plasticising admixture that enhances mortar mixes by forming stable air bubbles, improving workability, and increasing freeze/thaw resistance in bricklaying mortars. It reduces the need for lime, smooths out variations between different batches of sand and cement, and outperforms traditional Vinsol Resin-based plasticisers. This admixture also provides resistance to freeze/thaw cycling down to -2°C, improves trowelability, and reduces bleeding, while being chloride-free (less than 0.1% chloride ion content) and minimizing the potential
Select options
This product has multiple variants. The options may be chosen on the product page
EVERBUILD Creocote is an oil-based wood treatment designed for exterior timbers such as garden sheds, fences, and trellis work. Its oil-based formula provides excellent water repellency, helping to protect the wood from weather damage. The product enhances the grain definition and carries the distinctive odour associated with traditional Creosote.
Key Points
Oil-based treatment for exterior timbers like sheds, fences, and trellis.
Provides excellent water repellency to protect against weather damage.
Enhances the wood’s grain definition.
Features the trad
Select options
This product has multiple variants. The options may be chosen on the product page
Feb Febmix Admix SW is a liquid air-entraining plasticiser specifically designed to address the varying qualities of sand, cement, and water in South Wales and the West Country. It enhances mortar by providing a stable and uniform air bubble structure, improving resistance to freeze/thaw damage, reducing segregation and bleed, and increasing workability. It works with most types of Portland Cement and challenging sands, can replace lime, and is compatible with P.F.A.-containing mortars, offering easier and faster mortar application.
Key Points:
Provides a
Select options
This product has multiple variants. The options may be chosen on the product page
£4.06 ex. VATSilirub 2 is a PREMIUM QUALITY low modulus neutral cure silicone sealant. Very fast skinning time and final cure. 100% silicone, no shrinkage. Thick-bodied. Excellent toolability. Primerless adhesion on all common construction materials (glass, plastics, masonry substrates, metals and wood). High movement capability. Resistant to UV, rain, snow . High and low temperature resistance. FEATURES & BENEFITS - Low modulus neutral cure silicone - 100% silicone - Primerless adhesion on most surfaces - Independantly tested to ISO 11600 F&G 25 LM - Extensive colour range, including RALSelect options This product has multiple variants. The options may be chosen on the product page
