epoxy
Filter Your Product
£44.16 ex. VATARDEX EG 18 PLUS offers the advantages of both epoxy and cement-based grouts, combining high performance with ease of application. This grout is known for its exceptional chemical and abrasion resistance, creating joints that are both hygienic and low-maintenance. Here are four key points: Durability and Resistance: ARDEX EG 18 PLUS excels in environments that demand high durability. It is highly resistant to chemicals, including aqueous salt solutions, chlorine, commercial cleaning agents, alkalis, and various dilute mineral acids. Full chemical resistance is achievedSelect options This product has multiple variants. The options may be chosen on the product page- £69.45 - £119.03 ex. VATMapei UltraCare Kerapoxy Cleaner can be used both for fresh cleaning operations and after completing laying work to remove traces and stains of epoxy residues. It will remove traces and marks of all epoxy grouts, including MAPEI Kerapoxy, Kerapoxy CQ, Kerapoxy Easy Design, from ceramic and glass mosaic coating layers.UltraCare Kerapoxy Cleaner is a simple to use product that easily removes traces of epoxy grout from porcelain, glazed ceramic, glass mosaics and non-absorbent surfaces. It is also a ready to use product, so no dilution is required. It can be used immediately after gSelect options This product has multiple variants. The options may be chosen on the product page
- £29.25 - £80.91 ex. VATEVERBUILD EpoxySET 105 Standard Cure is a three-part general-purpose repair mortar utilizing epoxy resin technology, designed to withstand chemicals, impact, and abrasion. It is suitable for repairing concrete, screeds, stone, brick, and steel in both domestic and industrial environments. Ideal for fixing floors, steps, pipes, kerbs, sills, and cracks in masonry or concrete, it offers excellent chemical, impact, and wear resistance. The product can be applied in thin sections and provides greater physical strength compared to conventional cementitious systems, all while being easy toSelect options This product has multiple variants. The options may be chosen on the product page
- £45.75 ex. VATARDEX WA, classified under the BS EN 12004 R2 T designation, is recognized as an ‘improved reaction resin adhesive with additional characteristics and reduced slip.’ This solvent-free, epoxide resin-based adhesive serves both as a thin bed adhesive and grouting compound, making it ideal for environments that require chemical resistance or where traditional cement-based grouts may not be suitable. It is versatile enough to be used for fixing and grouting all types of ceramic tiles, glass, and ceramic mosaics in both internal and external applications. Once fully cured, ARDEX WA crSelect options This product has multiple variants. The options may be chosen on the product page
- £42.66 ex. VATTriblock P is a three-component epoxy-cementitious system designed to adhere to damp surfaces, including smooth materials like ceramic tiles, porcelain, and marble. This product creates a durable layer suitable for various floor coverings, such as parquet, PVC, linoleum, ceramic, epoxy, polyurethane, and cementitious smoothing layers. Manufactured using a formula developed in MAPEI’s research laboratories, Triblock P can be applied directly or diluted with water. Additionally, by incorporating 0.25 or 0.5 Quartz sand, it can be transformed into a smoothing mortar ideal for uneven c
- £8.69 - £37.09 ex. VATEporip B is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protSelect options This product has multiple variants. The options may be chosen on the product page
- £199.22 ex. VATMapei UltraCare Epoxy Off Gel is a high-viscosity cleaner for the removal of epoxy residues, such as Kerapoxy, Kerapoxy CQ, Kerapoxy Easy Design, etc., from ceramic or glass mosaic surfaces.UltraCare Epoxy Off Gel is a concentrated gel that is ready to use. It removes any residues, stains or epoxy grout halos without developing harmful emissions. The correct use of UltraCare Epoxy Off Gel does not damage either the surface of the installed glass or ceramic or the grout joints. Thanks to its viscosity, it is ideal also for application on vertical surfaces. ADVANTAGES
- £135.65 ex. VATSika Primer MB is a 2-component, solvent-free, reactive epoxy primer and moisture barrier designed for use with SikaBond wood flooring adhesives on challenging substrates. It features low viscosity for easy application, excellent penetration, and stabilization of the substrate, making it ideal for refurbishing existing surfaces. The primer supports quick project completion and is suitable for use with underfloor heating systems, providing a reliable solution for a variety of flooring applications. Key Points2-component, solvent-free, reactive epoxy primer with lowSelect options This product has multiple variants. The options may be chosen on the product page
- £24.37 - £87.53 ex. VATEporip is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protecSelect options This product has multiple variants. The options may be chosen on the product page
- £108.33 ex. VATARDEX R 5 E Rapid Curing Solvent Free Epoxy Primer and Bonding Agent is a two-component, solvent-free epoxy resin designed for application on sound concrete, cementitious surfaces, calcium sulfate-based screeds, and smoothing compounds. This product is ideal for situations where faster curing times are essential, as it creates a primer or bonding layer on most dry substrates, particularly on smooth or dense surfaces, both indoors and outdoors. It serves as a primer and bonding bridge for the ARDEX range of cement-based tiling and flooring products and must be sand-blinded with dry AR
- £36.43 - £100.28 ex. VATEVERBUILD EpoxySET NF is a two-pack, fine aggregate-filled, fast-curing epoxy resin bedding compound designed for applications where a non-slumping bedding material is needed. This stiff yet easily workable compound is ideal for bedding, gap filling, and concrete repairs. It can be applied using a trowel, spatula, or knife and cures to provide high mechanical properties, including excellent impact resistance and adhesion. It is resistant to oils, greases, salts, petroleum, acids, alkalis, and most common corrosive substances, with no shrinkage upon curing. It can be used in tSelect options This product has multiple variants. The options may be chosen on the product page
