external
-
£2.92 - £96.93 ex. VATBrick & Patio Cleaner is a powerful acid-based cleaning solution that effectively removes cement and mortar splashes, grime, oil, grease, and other tough stains from surfaces like brickwork, patios, garages, paving, concrete floors, and warehouses. It should be applied with a brush, left for 10-15 minutes without drying, scrubbed with a stiff brush, and thoroughly rinsed. For stubborn stains, it can be used undiluted, while for efflorescence removal, a 4:1 water dilution is recommended. The product is not suitable for limestone or marble. Key Points: EffectiveSelect options This product has multiple variants. The options may be chosen on the product page -
£3.68 - £7.43 ex. VATEVERBUILD JETCEM RAPID is a specially formulated, rapid-setting cement-based patching and repair compound that sets in approximately 30 minutes when mixed with water (depending on ambient temperature and conditions). It is easy to mix, requiring only water, and can fill holes up to 25 mm in one application. For deeper repairs exceeding 25 mm, JETCEM DEEP SAND/CEMENT is recommended. Key Points: Rapid Setting: Sets in about 30 minutes, depending on temperature and conditions. Easy Mixing: Simply add water for a quick, easy mix. Fills Deep Holes: Can fill up to 2Select options This product has multiple variants. The options may be chosen on the product page
-
£10.96 ex. VATSika AnchorFix-1 is a solvent and styrene-free, two-component polyester anchoring adhesive, offering fast curing and high load capacity. It is compatible with standard guns, can be applied at low temperatures, and remains non-sag even in overhead applications. Additionally, it has low odor, minimal wastage, and is ETA-approved for reliability. Key Points: Fast & Efficient: Quick curing with high load capacity. Versatile Application: Works with standard guns, even at low temperatures. User-Friendly: Non-sag formula, low odor, and minimal wastage. Certifi
-
£13.13 ex. VATLatexplan Trade is a two-part smoothing compound that comprises a grey powder (PART A) containing special cements, graded silica sands, and additives mixed with a synthetic rubber latex (part B). It can be walked on after approximately 1½ to 2 hours and is ready for flooring installation in about 12 hours, depending on thickness and ambient temperature. With a very low odour, it is suitable for use in confined spaces where work or occupancy must continue. Latexplan Trade is also compatible with Mapeproof ESM surface membranes, making it suitable for areas with residual or static moi
-
£31.70 ex. VATARDEX AM 100 is a rapid-setting, grey sand and cement render designed to facilitate quick project turnaround. This preblended product requires only the addition of water to achieve a slump-free mortar that can be applied in a thickness range of 2-30mm in a single coat. The primary advantage of ARDEX AM 100 lies in its ability to accommodate both very thin and substantial layers, making it an ideal choice for applications where conventional sand and cement renders would be impractical due to drying time constraints or required thickness. Its versatility extends to a range of s
-
£65.75 ex. VATARDEX P4 Primer is a ready-to-use, fast-drying, and drip-free primer that is solvent-free and designed for a wide range of applications. It can be used on both indoor and outdoor surfaces like walls, floors, and ceilings. This primer has a special formula that prevents dripping and splashing, making it easy to apply, even on ceilings. ARDEX P4 Primer is typically applied before using ARDEX tile adhesives or leveling compounds, and it creates a rough surface that helps tiles stick better, especially on smooth surfaces where adhesives might otherwise slip. It’s ideal for areas tha
-
£21.79 ex. VATBAL Priming Slurry Bond is a highly polymer-modified, cement-based priming slurry designed to deliver exceptional bond strength when fixing natural stone and porcelain tiles or pavers externally onto BAL Bedding Mortar. Quick and easy to use, it simply requires mixing with water and can also be used to prepare backgrounds prior to receiving mortar beds. Applied wet-on-wet using a trowel, brush, or roller to a minimum thickness of 2mm, the slurry should be applied to the substrate, the top of the bedding mortar, and the back of the tile, slab, or paver. Offering excellent coverage of up to 8m²
-
£23.38 ex. VATSeal It Reinforcing Mat is a heavy-duty spunbond polyester mat designed for use with Seal It Liquid Membrane. It is tear and puncture-resistant, improves strength, and offers a rapid repair solution for blisters, splits, and tears in existing substrates before coating. When used with Seal It Liquid Membrane, it provides more than a 50% strength improvement once cured. The mat can also be used as a repair patch for tears, rips, and damage to substrates prior to applying the liquid membrane. It can be applied directly from the roll or cut to size as needed, following the surface preparat
-
£1.90 - £444.79 ex. VATBond it PVA Adhesive & Sealer is a high-solids, high-performance sealer, primer, dust-proofer, and bonding agent, designed to improve adhesion and reduce cracking in cements and plaster. It effectively primes and seals porous surfaces, providing better water resistance, flexibility, and durability. This quick-drying formula offers excellent performance even at low temperatures and is phthalate-free for safer use. It can be diluted without compromising quality and is suitable for various applications, including plaster priming, rendering key coats, admixtures, dust sealing, and gSelect options This product has multiple variants. The options may be chosen on the product page
-
£3.50 - £3.53 ex. VATCromar AlphaChem Line Marking Paint is a solvent based spray applied, line marking paint – quick drying (30 minutes) and semi permanent. Ideal for spot marking for contractors on roads, factory and warehousing floors etc., as well as for grass applications. For more information on Cromar, please visit their website here. For primers and cleaners, please click here.Select options This product has multiple variants. The options may be chosen on the product page
-
£7.80 ex. VATEB25 is engineered with cutting-edge technology and a unique polymer blend, EB25 is a truly universal hybrid designed for interior and exterior applications, including sanitary and food preparation areas (ISEGA certified). Its exceptional flexibility, high bonding strength, and waterproof capabilities ensure it sticks to almost any surface—even underwater—and cures to provide resistance against mould, chemicals, petrol, temperature extremes (-40°C to +100°C), and UV radiation, all while maintaining low emissions (EMICODE EC1plus). With incredible initial grab, no slip, gap-fillSelect options This product has multiple variants. The options may be chosen on the product page
-
£14.07 ex. VATARBO® 925 Primer is a solvent-containing, air-drying primer formulated with isocyanate resin, designed for use on porous substrates to enhance adhesion before applying specified Arbokol products. This specialized primer ensures a strong and durable bond, especially on challenging surfaces. Key Points: Ideal for Porous Substrates: Enhances adhesion on surfaces like concrete and brick before sealant application. Isocyanate Resin-Based: Provides effective bonding for long-lasting performance. Solvent-Containing Formula: Improves application and penetrati
