ARDEX X7001 MICROTEC® Flexible Rapid Set Pourable Floor Tile Adhesive Grey 20kg
£45.35 inc. VAT
£37.79 ex. VAT
- Product ID: 18314
- Suitable For: adhering certain acoustic matting systems before tiling
- Area of use: INT
- Application Method: trowel
- Time to full cure: 2 hours
- Volume: 20kg
- Container Type: bag
- Type: tile adhesive
- Colour: grey
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
For more in our range of tile adhesives, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
ARDEX X 7001/ARDEX X 7001W is also suitable for adhering certain acoustic matting systems before tiling and is recommended for internal use only. It can be used for fixing tilebacker boards to wood-based sheets and boards. The mixed mortar has a pourable consistency, allowing for solid bedding of tiles without the need to butter the back of the tiles.
Surface Preparation
Concrete:
Allow a minimum of 6 weeks, preferably 12 weeks, drying time before tiling new concrete. Mechanically clean the surface and remove any curing agents.
Cement/Sand Screed:
Apply a wood float finish and prevent rapid drying for 7 days. Allow the surface to air dry for at least 3 weeks before tiling.
Calcium Sulfate-Based Screeds (Anhydrite):
Ensure they are laid and prepared according to manufacturer recommendations. Sand the surface and confirm a moisture content of 0.5% or less. Prime with ARDEX P 51, diluted 3 parts water to 1 part primer.
Existing Glazed Ceramic Tiling:
Ensure existing tiles are well adhered. Thoroughly clean and rinse off before priming with ARDEX P 82 or ARDEX P4. Suitable for internal dry areas only.
Flooring Grade Asphalt (Sanded):
If the sand key is well adhered, no primer is required. For internal areas only. If the sand key is poor, proceed as for smooth asphalt.
Flooring Grade Asphalt (Smooth):
Prime with ARDEX P 82 for internal dry areas only.
Timber Sub-Floors:
Ensure boards are dry, conditioned to the environment, rigidly fixed, and free from adhesion barriers. Sand surfaces to remove polish, wax, or old adhesives. If additional stiffening is required, overlay with 15mm plywood or flooring-grade chipboard, sealed on the back and edges, and screw or nail down at 300mm centers. The wood surface must be stable and rigid to withstand imposed loads without deflection. Ceramic floor tiles should not be used on wood-based boards in wet or external areas. For damp areas, oversheet the wood floor with a waterproof tile backing or matting system.
Priming
Prime the prepared board surface with ARDEX P 51 primer, applied undiluted by brush in a single coat. Allow it to dry for at least 1 hour at 20°C.
Mixing
Add ARDEX X 7001/ARDEX X 7001W powder to clean water in a container and mix thoroughly to create a fluid, workable mortar. Use a mixing paddle with a 10mm chuck and a variable-speed electric drill. The ratio is approximately 3.5 parts powder to 1 part water, with a 20kg bag requiring around 4.5 litres of water. The mortar is ready to use immediately, with a pot life of around 1 hour at 20°C. Apply the adhesive at temperatures above 5°C.
Fixing Technique
Apply the mixed mortar onto the prepared sub-floor and comb through with a notched trowel to create straight ribs. Ensure solid bedding with no voids. ARDEX X 7001/ARDEX X 7001W has an extended open time of at least 30 minutes, though tiles should ideally be fixed within 15 minutes. If the mortar begins to stiffen, discard it; do not add water. Adjust tiles for up to 15 minutes after fixing.
For flat-backed tiles, use a 5mm x 5mm notch trowel, 8mm x 8mm for general floor tiling, and 10mm x 10mm for keyed extruded tiles. Ensure solid bedding is achieved, particularly on timber substrates, where the bed thickness should be between 1mm and 4mm.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
£34.00 inc. VAT
£28.33 ex. VAT -
From: £8.39 inc. VAT
£6.99 ex. VAT -
£48.12 inc. VAT
£40.10 ex. VAT
£48.12 inc. VAT
£40.10 ex. VAT -
£205.00 inc. VAT
£170.83 ex. VAT
£205.00 inc. VAT
£170.83 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.64 inc. VAT
£2.20 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £6.64 inc. VAT
£5.53 ex. VAT
From: £2.76 inc. VAT
£2.30 ex. VAT
-
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal -
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal -
£23.04£18.11 inc. VAT£19.20£15.09 ex. VATBond It Trowel Mastic can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound. Storage Life Minimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use. For all other Bond-it -
£3.32 inc. VAT
£2.77 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
Reviews
There are no reviews yet.