Cromar Cromapol Acrylic Roof Coating
£9.08 inc. VAT
£7.57 ex. VAT
- Suitable For: preventing water ingress
- Area of use: EXT
- Application Method: brush/roller/squeegee
- Volume: 1kg, 2.5kg, 5kg, 20kg
- Container Type: tin
- Type: waterproofing
- Colour: 4 colours
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
Cromapol is a fibre-reinforced liquid acrylic resin dispersed in solvent, designed to prevent water ingress. Its high fibre content allows the coating to bridge small gaps and provide instant waterproofing with just one coat. Cromapol is available in Mid Grey, White, and Black, and also in a fibre-free formula in Opaque, White, and Mid Grey. This versatile product offers excellent adhesion, instant protection, and outstanding solar reflectivity (in White and Grey).
Key Points:
- Instant Waterproofing: Single coat application bridges small gaps and provides seamless protection.
- Versatility: Available in fibre-reinforced (Mid Grey, White, Black) and fibre-free (Opaque, White, Mid Grey) formulas.
- Durability: Fully flexible with excellent adhesion and reinforced membrane (fibre-reinforced formula only).
- Additional Benefits: No wash-off, economical, and excellent solar reflectivity in White and Grey.
Coverage: Cromapol provides an average coverage of 1–2 kg per m².
Shelf Life: The product has a shelf life of 12 months when stored in undamaged, tightly sealed containers.
Storage Conditions: Store Cromapol indoors at temperatures between 5°C and 20°C, away from sources of ignition, naked flames, and out of reach of children.
DELAY – this product is currently delayed as it is being reformuatled – if you purchase you will be contacted by the web team with an eta or alternative product offer.
For more in our range of waterproofing, please click here. To shop our full Cromar range, click here.
Alternatively you can visit the Cromar website by clicking here.
Cromapol is ideal for use on a wide range of surfaces, including flat and pitched roofs, roof lights, flashings, fibre cement sheeting, gutters, slate, asphalt, lead, metal, and primed roofing felt.
Application Instructions
Before applying Cromapol, ensure the surface is clean, dust-free, and free of debris. Remove all moss, lichen, and plant growth using AlphaChem Fungicidal Wash, paying special attention to corners and gutters. The area to be repaired should be free from standing water. Repair any cracks, splits, small holes, or flashings, and for gaps or expansion joints larger than 3mm, reinforce with Glass-Fibre scrim and Cromapol prior to full coating. While Cromapol can be applied to damp surfaces, for best results, application to a dry surface is recommended.
Cromapol can be applied easily using a brush, roller, or squeegee. Application temperature should be between 5°C and 25°C. Drying time varies up to one week, depending on temperature and coating thickness. The coating may remain soft during this period, but this does not affect its waterproofing performance. For detailed application instructions tailored to specific surfaces or uses, consult Cromar Building Products.
Please note: These instructions are for guidance only and do not guarantee product performance. While every effort has been made to ensure reliability, Cromar cannot accept liability for any loss, injury, or damage resulting from use.
20 reviews for Cromar Cromapol Acrylic Roof Coating
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
£176.27 inc. VAT
£146.89 ex. VAT -
-
-
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.90 inc. VAT
£3.25 ex. VAT
From: £3.01 inc. VAT
£2.51 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.82 inc. VAT
£2.35 ex. VAT
From: £5.26 inc. VAT
£4.38 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £8.39 inc. VAT
£6.99 ex. VAT
From: £11.22 inc. VAT
£9.35 ex. VAT
From: £11.22 inc. VAT
£9.35 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
£12.68 inc. VAT
£10.57 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£11.52 inc. VAT
£9.60 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
John M. (verified owner) –
Brilliant no problems at all, the Crompapol did the trick. Quick Delivery with sound advice given.👌
Ian W. (verified owner) –
Unfortunately the product that I ordered was out if stock due to supply issues, however I was offered an alternative, similar product which, whilst being slightly more expensive, the Company offered to me at the same price. Fantastic supplier, well recommended. I will definitely use Sealant Supplies Ltd again.
Geoffrey Paver (verified owner) –
Brilliant Service keeping us well informed as original product not availabe. Will certainly recommend
Anonymous (verified owner) –
Great service, pleased with the replacement offered, thank you
Caroline Campbell (verified owner) –
My product was unavailable but got offered a replacement roughly same spec which came promptly good choice
Richard (verified owner) –
Mike was very helpful and you kept me informed of dispatch and delivery.
Howard (verified owner) –
Very helpfull
Chris M. (verified owner) –
Completed job this weekend, good coverage, just hard work only took 6hrs
Deborah (verified owner) –
I can’t comment on this particular product as it was unavailable and I was offered a different product as an alternative, so this is more of a review for the company who managed my order to satisfaction. Many thanks
Keith T. (verified owner) –
great product, very competitive prices, really good service
MICK THOMPSON (verified owner) –
Great service
Kevin Smith (verified owner) –
Although you could not supply the Cromapol, you offered an alternative at the same cost.
You kept me informed of a slight delay whilst waiting for the alternative to be ready to be sent.
You also supplied the alternative in 4 x 5ltr cans which makes it easier to carry and use
Guven (verified owner) –
Disgusting! I was sent a 20L tin that was half full. They then sent me out a 5L as compensation which is the wrong color!! They sent me a black one instead of grey.. this is all after they initially encouraged me to order this seal acryl rather than the cromapol which I know it’s good.
james McKee (verified owner) –
Product fine and does what it says
If I had one issue it would be that when you contact me by email about issues with the order you cannot reply to the sent address and have to faff about with a different address and input the order details
Marius (verified owner) –
Good stuff
Peter Vance (verified owner) –
Originally ordered Cromapol. Was contacted to say there would be quite a wait and was offered alternative,same quality or better. I agreed to accept and got my order quickly. Sealacryl in grey, slightly darker,nice,and a longer shelf life. Very pleased. Hopefully deal with you again.
ManyThanks.
Peter Vance.
lawrence guest (verified owner) –
Very good
Gary Sandford (verified owner) –
Fantastic customer service
Julie (verified owner) –
Great product at a good price, my husband was very pleased with the job
Anthony Blanning (verified owner) –
Great service fast postage really pleased many thanks.