Isoflex Isoflex Liquid Rubber
From: £26.94 inc. VAT
£22.45 ex. VAT
- Brand: isoflex
- Manufactuer: isoflex
Isoflex Isoflex Liquid Rubber is a high-performance, ready-to-use waterproofing and protective coating designed to create a seamless, flexible membrane over a wide range of surfaces. Applied as a liquid, it cures to form a durable rubber layer that effectively seals cracks, joints, and porous substrates, preventing water ingress and protecting against weathering, UV exposure, and general wear. Its strong adhesion to materials such as concrete, metal, wood, and masonry makes it suitable for roofs, gutters, foundations, balconies, and repair work, while its elastic properties allow it to accommodate structural movement without cracking or peeling.
Isoflex Liquid Rubber is a flexible, waterproof coating used to seal and protect surfaces from water ingress, corrosion, and environmental wear. It is commonly applied to roofs, gutters, balconies, foundations, metal structures, concrete, wood, and masonry where a durable, elastic membrane is needed. Once cured, it forms a seamless rubberized barrier that expands and contracts with temperature changes, making it ideal for repairing cracks, joints, and areas prone to movement. Isoflex Liquid Rubber is also used for preventative maintenance, extending the lifespan of surfaces by protecting them from moisture, UV exposure, and general deterioration in both residential and commercial applications.
Isoflex Liquid Rubber is a liquid-applied, elastomeric waterproofing membrane produced by Isoflex, commonly used to seal and protect roofs, balconies, terraces, foundations, planter boxes, and other concrete or masonry substrates where a seamless, flexible barrier is required. It is typically applied by brush, roller, or spray to form a continuous membrane that accommodates minor substrate movement and helps prevent water ingress. Limitations include the need for thorough surface preparation (clean, dry, and sound substrates are essential for adhesion), adherence to application temperature and humidity ranges, and curing time before exposure to traffic or moisture. Depending on the specific system, it may require a compatible primer and a protective or UV-resistant topcoat, and it is generally not intended for constant water immersion, heavy mechanical wear, or substrates contaminated with oils or solvents without additional protection or system design.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£73.84 inc. VAT
£61.53 ex. VATMapei Malech Primer is a micronized acrylic-based primer in water dispersion. It’s generally used as a primer for wall surfaces, for example, concrete or cement mortar repairs. Before applying a coloured finishing coat of Elastocolor Paint or Elastocolor Rasante, it is advised to use Malech as a regulator of substrate absorption. Malech can also be used in the Aquaflex System cycle for the permanent encapsulation of asbestos, or as a primer for the covering layers of Aquaflex. It’s a micronized acrylic resin-based primer in water dispersion that penetrates better than trad -
From: £67.44 inc. VAT
£56.20 ex. VATARDEX P 82 is a two-component, water-based epoxy synthetic dispersion primer and bonding bridge that is non-flammable and non-corrosive. It is specifically designed to create a strong priming and bonding layer on various substrates, particularly smooth or dense surfaces. Intended for interior use only, ARDEX P 82 is suitable for dry or intermittently damp areas and can be applied on floors with an effective ARDEX damp proof membrane, such as ARDEX DPM 1 C and ARDEX DPM 1 C R. This primer is an ideal preparation layer before applying ARDEX's range of cement-based tiling and flooring pSelect options This product has multiple variants. The options may be chosen on the product page -
£139.08 inc. VAT
£115.90 ex. VATARDEX R 5 E Rapid Curing Solvent Free Epoxy Primer and Bonding Agent is a two-component, solvent-free epoxy resin designed for application on sound concrete, cementitious surfaces, calcium sulfate-based screeds, and smoothing compounds. This product is ideal for situations where faster curing times are essential, as it creates a primer or bonding layer on most dry substrates, particularly on smooth or dense surfaces, both indoors and outdoors. It serves as a primer and bonding bridge for the ARDEX range of cement-based tiling and flooring products and must be sand-blinded with dry AR -
From: £10.92 inc. VAT
£9.10 ex. VATMapei Primer G is a synthetic resin-based primer that, upon application to any surface, dries to create a flexible, glossy coating that enhances the integrity of the surface as needed. Primer G also enhances the bonding of smoothing compounds, paint, wallpaper adhesive, tile adhesive, and mortar for rendering. The layer on gypsum or cement surfaces acts as a barrier, preventing chemical reactions between sulfates and cement aluminates in gypsum that, when exposed to moisture, can lead to the formation of the problematic "ettringite" salt, which can cause separation. When used beforeSelect options This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.28 inc. VAT
£2.73 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.90 inc. VAT
£3.25 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.58 inc. VAT
£7.15 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £13.14 inc. VAT
£10.95 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.07 inc. VAT
£2.56 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £5.26 inc. VAT
£4.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £7.02 inc. VAT
£5.85 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
£674.82 inc. VAT
£562.35 ex. VAT
£674.82 inc. VAT
£562.35 ex. VAT
£2,367.36 inc. VAT
£1,972.80 ex. VAT
£2,367.36 inc. VAT
£1,972.80 ex. VAT
£3,974.40 inc. VAT
£3,312.00 ex. VAT
£3,974.40 inc. VAT
£3,312.00 ex. VAT
£1,415.58 inc. VAT
£1,179.65 ex. VAT
£1,415.58 inc. VAT
£1,179.65 ex. VAT
£2,422.08 inc. VAT
£2,018.40 ex. VAT
£2,422.08 inc. VAT
£2,018.40 ex. VAT
£932.59 inc. VAT
£777.16 ex. VAT
£932.59 inc. VAT
£777.16 ex. VAT
£1,105.92 inc. VAT
£921.60 ex. VAT
£1,105.92 inc. VAT
£921.60 ex. VAT
£1,734.00 inc. VAT
£1,445.00 ex. VAT
£1,734.00 inc. VAT
£1,445.00 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.