Ronseal Damp Seal Aerosol 400Ml
£11.00 inc. VAT
£9.17 ex. VAT
- Brand: Ronseal
- Manufactuer: Ronseal
Ronseal Damp Seal Aerosol 400ml is a convenient, quick-drying spray paint designed to permanently block and seal damp stains on interior walls and ceilings. Ideal for covering marks caused by moisture, smoke, grease, or water damage, it creates a protective barrier that prevents stains from bleeding through your topcoat. The aerosol format makes it easy to apply evenly, especially in hard-to-reach areas, and it dries rapidly so you can paint over it with emulsion in a short time. Suitable for use on plaster, cement, and stone surfaces, it’s a practical solution for restoring a clean, fresh finish to affected areas before redecorating.
The Ronseal Damp Seal Aerosol 400Ml is a quick and effective solution designed to block and seal damp patches on interior walls and ceilings before repainting. It works by creating a barrier that prevents moisture stains from bleeding through new paint, helping you achieve a clean, even finish. Ideal for treating areas affected by minor damp, water stains, or smoke damage, the aerosol format makes it easy to apply evenly without the need for brushes or rollers. Simply spray directly onto the affected area, allow it to dry, and then paint over it with your chosen topcoat for a long-lasting, professional-looking result.
Application & Limitations (Ronseal Damp Seal Aerosol 400ml):
Ronseal Damp Seal Aerosol 400ml is designed for quickly sealing and covering interior damp patches, water stains, and discolouration on walls and ceilings, creating a protective barrier that prevents stains from bleeding through paint. It is typically used on surfaces such as plaster, cement, and brick, and is especially useful for spot repairs where a brush-on product would be inconvenient. The aerosol format allows for easy, even application in hard-to-reach areas, drying quickly to provide a smooth, paintable surface. However, it is important to note that this product is not a permanent solution to underlying damp problems; it only masks the visual effects and does not stop the source of moisture. It should not be applied to wet or actively leaking surfaces, nor is it suitable for exterior use or large-scale damp treatment. Proper surface preparation, including cleaning and drying, is essential for best results, and adequate ventilation should be ensured during application due to fumes.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
£3.76 inc. VAT
£3.13 ex. VATBrick & Patio Cleaner is a premium, acid based solution for removing mortar stains from brickwork and cleaning patios. For more information on Cromer, please visit their website here. For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here. -
From: £34.99 inc. VAT
£29.16 ex. VATFosroc primer 7 comes as a ready to use, brush-on liquid, that prepares porous surfaces such as stone, brickwork, concrete, timber and un-glazed edges of ceramic tiles before the application of Thioflex 600. Primer 7 is a low viscosity one-component solvent-based priming system for concrete joints before the installation of Thioflex 600 joint sealants. Advantages - Fast-drying - enables sealant work to progress almost right away - Single component - no mixing required, so can be easily applied Technical Support - Easy to use, brush applied primer - Essential for use with ThiSelect options This product has multiple variants. The options may be chosen on the product page -
£31.92 inc. VAT
£26.60 ex. VATPRIMER C - A single component, solvent borne, polyurethane priming coat to be used with CM200 and CM200 PF. For more in our range of primers and cleaners, click here. For shop our ful CM Sealants range, please click here. For more information on CM sealants, you can visit their website here. -
£89.46 inc. VAT
£74.55 ex. VATSika Aktivator 205 is a 1 part liquid, that is used to maximise adhesion on a range of non-porous substrates such as plastics, metals, ceramic screen prints and painted surfaces. Primer Product Benefits Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Advantages Improved adhesion on multiple substrates Short flash-off time Easy to use Transparent We also supply & stock a wide range of Sika products on our website. For any further information, you may need, please visit the Sika website.
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.35 inc. VAT
£2.79 ex. VAT
From: £8.58 inc. VAT
£7.15 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.02 inc. VAT
£5.85 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £43.20 inc. VAT
£36.00 ex. VAT
From: £32.02 inc. VAT
£26.68 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565Â Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
Reviews
There are no reviews yet.