Sika RESIBLOCK Trade Paving Sealer
From: £43.33 inc. VAT
£36.11 ex. VAT
- Suitable For: Clay Block, Concrete Block, Concrete Flag, Concrete Slab, Internal Spaces, Natural Stone
- Area of use: EXT & INT
- Volume: 5L \ 25L
- Colour: clear
- Brand: sika
- Manufactuer: sika
Data Sheets
Resiblock Trade Paving Sealer is an eco-friendly, solvent-free paving sealer designed to stabilise jointing sand and protect the surface of a wide range of paving types. Formulated using a low-viscosity thermoplastic acrylic copolymer emulsion, it binds sand particles together and secures them to the vertical faces of pavers. Its unique moisture-drying technology helps avoid common issues associated with conventional solvent-based acrylic sealers. The sealer appears whitish when wet but dries clear, with a low-odour formulation for easier application.
Key Points:
-
Sand Stabilisation: Binds jointing sand particles together and secures them to the vertical faces of pavers.
-
Surface Protection: Helps protect and preserve a wide range of paving surfaces.
-
Eco-Friendly Formula: Solvent-free formulation with no unpleasant solvent odours.
-
Clear-Drying Finish: Applies with a whitish appearance and dries clear, using unique moisture-drying technology.
Storage – Store at room temperature range of 5ºC – 30ºC. Protect from frost. Do not allow to freeze
For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here.
Suitable for:
- Clay Block
- Concrete Block
- Concrete Flag
- Concrete Slab
- Internal Spaces
- Natural Stone
APPLICATION INSTRUCTIONS
-
Ensure the surface and jointing sand are thoroughly dry and free from dirt. Damp paving will significantly reduce joint penetration.
-
Only apply RESIBLOCK TRADE when no rain is forecast within the next 24 hours.
-
Do not apply in extreme temperatures below 5°C or above 30°C.
-
Thoroughly sweep the paving, ensuring no jointing sand remains in the paver chamfers. For non-chamfered paving, sweep sand at least 3–5mm below the surface.
-
Stir contents thoroughly before use.
-
Apply using a watering can fitted with a rose. Allow to sit for 2–3 minutes, then remove all surplus with the RESIBLOCK SQUEEGEE. On riven surfaces, remove product from depressions using a clean cloth or sponge to prevent pooling.
-
Apply at the correct coverage rate to ensure full joint stabilisation (typically 1 litre per 2m² of 100 x 200mm CBP).
-
RESIBLOCK TRADE is normally applied as a single-coat system.
-
Keep foot traffic off the sealed area until dry. Do not allow vehicles onto the surface until the joints have hardened.
-
Always wear protective gloves and goggles. Refer to the latest MSDS.
-
Clean uncured product and tools immediately using water and detergent.
IMPORTANT
RESIBLOCK TRADE must not be applied to previously sealed surfaces. Contact the Resiblock Technical Department for advice on treating previously sealed paving.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.28 inc. VAT
£2.73 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.90 inc. VAT
£3.25 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.58 inc. VAT
£7.15 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £13.14 inc. VAT
£10.95 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.07 inc. VAT
£2.56 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £5.26 inc. VAT
£4.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £7.02 inc. VAT
£5.85 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
£1,123.92 inc. VAT
£936.60 ex. VAT
£774.00 inc. VAT
£645.00 ex. VAT
£1,208.16 inc. VAT
£1,006.80 ex. VAT
£4,370.11 inc. VAT
£3,641.76 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages -Â Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.