Thompsons Drive Seal Black is a ready-to-use, bitumen-based coating designed to restore and protect worn tarmac and asphalt driveways with a durable black finish. It penetrates the surface to rejuvenate tired areas while forming a tough, water-resistant layer that helps prevent damage from weather, oil spills, and everyday wear. Easy to apply by brush, roller, or squeegee, it dries to a uniform, professional-looking finish that enhances appearance while extending the life of the driveway. Ideal for domestic use, it provides long-lasting protection and a clean, refreshed look with minimal effort.
Thompsons Drive Seal Black
From: £26.50 inc. VAT
£22.08 ex. VAT
- Brand: thompsons
- Manufactuer: thompsons
Thompsons Drive Seal Black is a ready-to-use, bitumen-based coating designed to protect and rejuvenate asphalt and tarmac driveways. It is used to restore the original black appearance of worn or weathered surfaces while providing a durable, water-resistant barrier that helps prevent damage from rain, oil spills, frost, and general wear. Ideal for domestic driveways, paths, and other exterior asphalt areas, the product seals small cracks, reduces surface dusting, and extends the life of the driveway by shielding it from everyday environmental exposure.
Thompson’s WaterSeal Drive Seal Black is designed for restoring and protecting asphalt (blacktop) driveways by filling small cracks, improving surface uniformity, and providing a renewed black finish that helps resist water penetration and weathering. It is suitable for use on properly cured, sound asphalt driveways and walkways, offering a durable, skid-resistant coating when applied under the recommended conditions. However, it is not intended for concrete surfaces, structural repairs, or areas with standing water, and it should not be applied to new asphalt that has not fully cured (typically less than 6–12 months old). Performance may be limited on severely cracked, crumbling, or oil-saturated surfaces, and application is restricted during cold, wet, or excessively hot conditions, as improper temperature or moisture can affect adhesion, drying time, and overall durability.
3 reviews for Thompsons Drive Seal Black
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related products
-
From: £8.58 inc. VAT
£7.15 ex. VATMapesil AC is an acetic-crosslinking silicone sealant that provides excellent durability and flexibility for various sealing applications. It is especially suitable for sealing glass, ceramic, and anodised aluminium, with additional applications possible on concrete, wood, metal, painted surfaces, plastic, and rubber when used with a bonding enhancer. Its ability to create a perfectly elastic barrier makes it ideal for use in building, mechanical engineering, shipbuilding, and more. Available in both coloured and transparent options, Mapesil AC maintains its properties even after lonSelect options This product has multiple variants. The options may be chosen on the product page -
From: £7.94 inc. VAT
£6.62 ex. VATSoudal Fire Silicone B1 FR is a high quality, neutral, elastic, one-component sealant based on silicone's which conforms to the DIN4102 B1 standard for fire retardant silicone and has a fire rating up to a 4-hour window in specific joint configurations & when installed in accordance with the manufacturer's instructions. Characteristics Colourfast and UV-resistant Remains permanently elastic after full cure Excellent adhesion on most surfaces Low modulus DIN 4102-Part 2: Class B1 For an application gun for this product, pleaseSelect options This product has multiple variants. The options may be chosen on the product page -
£2.03 inc. VAT
£1.69 ex. VATEverbuild Standard Gun A Nail is a high strength, multi-purpose, gap-filling building adhesive that is solvent free & can be used in a wide variety of building and home improvement applications. It can be used where at least one of the substrates to be bonded is porous. Advantages - Solvent-free - environmentally friendly. - Excellent bond/adhesion strength - adheres to almost all common surfaces. - Exceptional early grab properties - suitable for both vertical and horizontal positions. - High solids formulation. - Extended open time. - Will adhere to damp surf -
From: £2.65 inc. VAT
£2.21 ex. VATEverbuild Fireseal 300 is a one-part, acrylic-based, intumescent sealant that gives a firm yet flexible seal. The product will resist fire passages for up to 5 hours. The selected fillers used in this formulation also make it suitable for use as an acoustic sealant. Alternative fire product from Everbuild is the Fire Seal 400 - slightly less fire-resistant time but silicone-based over the acrylic 300, making it slightly easier to apply. Advantages When exposed to heat, this product will swell greater than 3 x it’s original size. - No priming required for most construction subsSelect options This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.28 inc. VAT
£2.73 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.90 inc. VAT
£3.25 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.58 inc. VAT
£7.15 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £13.14 inc. VAT
£10.95 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.07 inc. VAT
£2.56 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £5.26 inc. VAT
£4.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.76 inc. VAT
£7.30 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
£1,123.92 inc. VAT
£936.60 ex. VAT
£774.00 inc. VAT
£645.00 ex. VAT
£1,208.16 inc. VAT
£1,006.80 ex. VAT
£4,370.11 inc. VAT
£3,641.76 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages -Â Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Brian C. (verified owner) –
Very good price and delivered promptly
Andrew (verified owner) –
Excellent company to order through. Product was well packaged and delivered on time. Also best price.
Andrew Coyle (verified owner) –
Well chuffed with the service.